IP Waterproof Box 150x100x80mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Waterproof box with sealing. Used for electronics and other stuff
- Rating
- 5 / 5
- Likes
- 47
- Downloads
- 469
- Makes
- 1
- Views
- 1,744
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — NoDerivatives
We have needed some waterproof boxes to install some cables in it. as the shipping time was too long I've decided to print them with 3D printer.
First 2 boxes were printed with PLA, should be waterproof.
Another attempt will be made with ABS.
Anyways 6 walls, 6 tops and 6 bottoms (to achieve 100%infill)
-----version updated------ (Bottom v2.1 and sealing ring scaling fixed, Sealing ring v2.1 raised from 0.6 to 1.2mm)
-sealing ring needs to be printed with TPU (pls don't use AMS-BambuLab)
-use normal screws (30-45 mm length) for wood or for plasterboard (for the best result pre-drill a hole with small drill to avoid breaking) (tip v2: you can use soldering iron tip-nuts with m2,3,4 bolts)
Needed time aprox. 5-6 Hours.