Counting matching models…
Outdoor floating waterproof box for ATS-mini receiver, with rod antenna holder. BOM Army survival grey PETG for box. FILAFLEX 60A for insulating gasket 6x screw M3 x 30mm Allen head
This is a waterproof and dust/sand proof survival container/ On the threads it has a little but of ridges that makes the closing really strong it may look not so smooth but it makes it stronger and more tight. to make it watertight you…
a Water tight screw on container. Cut a seal according to the printed seal profile, or Print the seal in TPU.
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
I needed to make a waterproof box for my M5 TimerCamera F. The Inside dimensions of the box are 99mm to fit the M5 TimerCAM with tailbat module connected, but feel free to resize it to your needs. I will be printing a small version (60%…
Polestar (Volvo) Waterproof Small Key Replaceable Shell, 3D Printed. When the battery of the small key fails, you can open the shell and replace the battery yourself. The original battery can be directly installed in the replacement…
modification of a thingiverse model. https://www.thingiverse.com/thing:1715725/comments
Outdoor floating waterproof box for ATS-mini receiver, with rod antenna holder. BOM Army survival grey PETG for box. FILAFLEX 60A for insulating gasket 6x screw M3 x 30mm Allen head
I had to make smaller for the duboRc reciever.
Features Waterproof Variable size of the rear box Five quick-release mount points on the body of the box, another on the rear box (if it is deeper than 80mm) suitable for example for mounting on a camera tripod - the screw is part of the…
"waterproof" box for the spektrum sr315 receiver. The wires should fold over the top and flat down the front of the case. The Cover will pinch all of the wires. Add a bead of sealant below and above the wires where they fold over the box…
Description I created this Rugged Case so I could just toss my Airpods in my bag. I needed them to be tough. This case was designed for Apple Airpod Pros 1, but will work with Pros 2 - as I just learned. I created the case with the help…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) WATERPROOF KEY CAPSULE -…
Printing instructions: 40% infill PETG, ABS recommended Tree support for cable outlet Find more detailed information about this model on my original upload
You can print this on any 3D.Printer, just use UV resistance material like ABS or ASA PETG or so 3 walls 25% infill Use support just for the edge
Cestovní vodotěsná krabička na podpalovače. Do krabičky se vejdou 3 kusy podpalovačů o formátu 2x2x2 cm a cca 35 sirek. Doba hoření jednoho podpalovače je cca 8 minut. Vnitřní vložka pro podpalovače je ze dvou části, aby bylo umožněno…
This is a vertical mount for the DJI Osmo Action 5 in its waterproof case. Should fit Osmo Action 3 and 4 as they're said to be the same dimensions. Besides the printed piece, you'll need an M5 nut and a screw, I sourced mine from another…
Just a box a simple box a box YOU NEED both Prusa emblem and blank The Story: Once upon a time I printed the terrarium chicken I wanted to give it to my botany teacher in a box but I couldn't find a blank one that printed fast enough.
I washed my JBL Flip 6 once, it didn't charge for a whole day because the water had entered the USB-C port, I created this simple cap (to be printed in TPU) in such a way as to make it totally waterproof
A straight joint cover would not fit in the curved elbow. This design provides a channel to house and protect the cable. Join the wires by soldering, then shrink sleeve. Seal with silicon. Print with 4 vertical perimeters to slightly…
Update 25. Jun. 2021: fixed bug with only the sides rounded; this is also default now for better printing Description: This is a waterproof housing for the forumslader , a device to charge your USB device with the hub dynamo of your bike…
Update 25. Jun. 2021: fixed bug with only the sides rounded; this is also default for better printing Description: This is a parametric rectangular, waterproof housing made with openscad. There are two files: housing.scad is the module…
I wanted a small portable and waterproof case for the Allen key I carry on my life jacket when I go out with my kayak. The waterproofing is not tested but at least it provides a basic isolation for salt water environments. The measures…
a Water tight screw on container. Cut a seal according to the printed seal profile, or Print the seal in TPU.
This is a waterproof case for an LM2596S dc - dc power converter. I used these to down step 24v power to 12v for some landscape lighting. There are 4 mounting points to fit zip ties or small screws into. These are designed to use 3/8" NPT…
Non Watertight version: https://www.printables.com/model/1022611-mini-pill-travel-case-container-for-backpack-or-ke
Non Watertight version: https://www.printables.com/model/1024677-mini-travel-case-backpack-key-hanger
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
I took @GeoffGilson's “ 18650 Container Bottles for 28mm PET Caps ” model and made it longer to fit my Dynavap B into it. You will need to use a PET bottle lid from a soft drink for the cap! The tube should be waterproof and smell-proof…
Note: the STLs included here are for a nominal 4mm cable diameter. Some experimentation will be needed to ensure watertightness for different cable stiffness/size. To assemble the penetration, you will need to print: 1x…
3D model description I’ve created two separate waterproof cases one for the ESP32 WLAN module and another for the WT32-ETH01 module in combination with the PN532 NFC module to protect your electronics in outdoor or damp environments. Both…
What is this? A rugged and waterproof 3D-printable keyring case for AirTags. Required Components 3x M3x6mm screws 3x M3 nuts 1x Rubber O-Ring (36mm outer diameter, 34 diameter inner diameter, 1mm thickness) Editable .f3d file has been…
To waterproof SMA connectors inside a plastic torpedo, start by cleaning the connectors to remove any dust or residue. Then, screw the connectors tightly together to prevent any movement. Place the connectors inside the plastic torpedo…
BOM PETG black filament for box FILAFLEX 60A for insulating gasket 8x screw M3 x 30mm Allen head
I needed to make a waterproof box for my M5 TimerCamera F. The Inside dimensions of the box are 99mm to fit the M5 TimerCAM with tailbat module connected, but feel free to resize it to your needs. I will be printing a small version (60%…
Hello, this is an ammo box designed for .45 ACP rounds. It is a waterproof and rugged box for long term storage, and also compact enough to bring to the range. Print Settings: Base and Lid - PETG or ABS recommended. Increase top and…
Waterproof cable entry for any kind of usage. I used it for Solar and antenna cable entry in my Morohome. print with 30% infill you also need M12 waterproof cable adapter like this: http://www.platan.ru/cgi-bin/qwery.pl/id=34119693 I used…
This is waterproof case for DJI Action Camera I printed top and bottom with PETG and the lock with ABS. Add a rubber O-ring to improve the waterproof capability More detail in video:
Waterproof wall mount for a specific PWM Solar Charger Controller. The waterproofing is achieved by adding a cover that goes in front and behind the controller, with an angle for the water to slide on top of the cover This design might…
Note: The Ethernet Module PINs didnt land where I expected based on the model, so I used a knife to cut the lower two standoffs. I attempted to replicate this in the .STEP but its not tested and certainly would be below the expected…
I helped my buddy update his Clod Buster with a new style ESC & receiver. The tray will screw into the original holes. The receiver tray has a lid. it also has a gasket model, which I printed out of TPU, to help with waterproofing. I used…
A simple baseplate for your RAK 4631 outdoor solar nodes. Print out of PETG for better heat resistance in summer sun. Standard 0.2mm profile. Supported Hardware: RAK 4631/19007 INA219 Current Sensor SD05CRMA Solar Charge Controller…
I made a bigger Reciever box to fit larger Recievers like the DumboRC 10ch for my RC Crawler. In theory waterproof and seems to work well in my rig. This was designed for HB R1001/ Traxxas TRX4 but should be possible to use in any RC as…
Box 160x80x45 designed for Garmin xero c1. Printed with PETG or PLA. You only need screws, nuts and silicone as a gasket
Here is my 8 AMP LIFEPO battery for multiple purpouse. I Use it for kayak fishing, powering my garmin striker GPS
Stronger if printed on its side with supports. Gcode file is 50% infill. Files include with and without antenna tube mount.
A little History of this 3D model… (Festool MFT 3 Simple Waterproof Deposit, Heavy Duty, only 3 pieces) Just a heads-up: the current pictures are from an earlier printed model I whipped up to keep my 10-year-old daughter's cello endpin…
Description en français : Support de connecteur Anderson encastrable : Un support pratique conçu pour intégrer des connecteurs Anderson directement dans une surface. Imprimez-le en PLA, ABS ou PETG pour une meilleure résistance et…
This is a waterproof squeeze fan. It doesn't need screws, doesn't need support, can be assembled very easily, durable, very cool, and not noisy. You only need a hammer! +Jul 06,2021 The turbine have been updated to have more power. +Jul…
A simple clip/bracket for mounting waterproof IP65 silicone encased LED strips (10mm width) when you can't use the glue underneath the strip. They also work well for securing cables. I had them SLS printed but printed on an FFF printer in…
I made this one for my son's bath book. The book always somehow wet but after using this thing, 16~20hours was enough to dry the whole book. The page holder is 8mm wide, so if you want to hold thin pages, simply change the gap from the…
Here's another waterproof boxe to install some cables in it. As the shipping time was too long I've decided to print it with 3D printer. First 2 boxes were printed with PLA, should prevent water drops. Another attempt was made with ABS…
Polestar (Volvo) Waterproof Small Key Replaceable Shell, 3D Printed. When the battery of the small key fails, you can open the shell and replace the battery yourself. The original battery can be directly installed in the replacement…
modification of a thingiverse model. https://www.thingiverse.com/thing:1715725/comments
Waterproof cover for DC Connector. Used for outdoor cameras in order to protect the dc connector when the camera is powered via PoE. For best results use flex filament.
Waterproof cover for DC Connector. Used for outdoor cameras in order to protect the dc connector when the camera is powered via PoE. For best results use flex filament. *tested for HIKVISION DS-2DE3A400BW-DE-W(F1)(S5), but it should work…
Intro I designed a program in FreeCAD that could be used to generate a basic box with a seal on it to house my projects. It started because I was sick of re-designing boxes every time I needed an enclosure. Over time more features made it…
This is the ultra basic version of the parametric box with hinges and latches I've also published on here (check it out under my profile). This version of the box has no mounting points for hinges or latches and it just for shipping…
Built this as a proof of concept for a waterproof housing using printed TPU as an o-ring. Holes are to fit a 2.5 screw and has 3mm in the lid and about 2.5 mm of threading. O-Ring is to be printed in TPU. I test by printing 2 and filling1…
I used shallow version of original box but there is enough room for all geocaching needs… Instructions can be seen on the original box page. You will need to print seal with TPU or buy one to make it waterproof. (EDIT: The printed seal…
I made a cold shoe adapter for the GoPro 3 Black Edition Waterproof case. Not sure if its compatible with 3+ editions.
To make it waterproof. I recommend to add silicone (as example Done Deal) on all adjacent surfaces, and to the wires under the small cap. Use it on your own risk! PS: parts are very stiff to connect. Its important for better waterproof…
18650 waterproof case, two options: 6X battery, the standard version 5X battery, a compact version Both of the models have been equipped by a small slot to house a gasket, to ensure a very strong protection to the liquids intrusion in the…
This model is my first CAD design and first upload. The goal of this build was to design a replacement cover for a speaker cover that broke using the part design workbench and linear array tool in freeCAD, export the STL and upload to the…
Internal scan of a 5gal masterforce container from menards. I eventually plan to make something to fit inside of this, but of course needed to get the internal dimensions. Files attached are a SCAN/stl/mesh only, not nice geometric step…
Internal scan of a 20gal masterforce container from menards. I scanned the 5, i figured id scan the 20gal also. 2 files are included, both same scan data, just simplified to different sizes.
This STL file provides a replacement wall mount designed to match the original dimensions of the waterproof shower phone holder, model B09PRCJ1W8. Over time, the adhesive backing of the original mount may lose its grip, especially in…
Bring nature into your home with this unique 3D-printed vase mimicking a tree stump! Designed with both aesthetics and functionality in mind, this vase perfectly blends the natural look of PLA Wood with a practical, waterproof PETG…
Discover the Modern Teardrop Vase (Teardrop Collection), an elegant and minimalist 3D printable design from the Teardrop Collection by Mythos Models. Inspired by the pure, serene form of a falling drop, this vase embodies stillness,…
When the battery is empty of your Volvo Key Tag / Sport Key, you don't need to throw it away and order a new one from the dealer. You can open it carefully, for example with a Dremel. The original battery is a Panasonic CR-2032L/F1N, it…
It needs 3xM3.5 countersink screws to mount.
This is a simple waterproof capsule for whatever you need to have outdoors or when you travel. I printed this with Bambu lab PLA Matte and with Bambu lab TPU 90A for the gasket.
This is a fully 3D printed enclosure I use for my Meshtastic solar nodes. It includes provisions to stick a solar panel directly to the lid. It also includes a separate holster you can screw into a wall and then just slide the node into…
Características: - Impermeable: Ya que tiene un aro que se imprime con TPU (filamento flexible) y ayuda a la impermeabilización. - Flotante: Está diseñada de tal forma que flote ni bien caer al agua. - Portátil: Tiene un aza en uno de sus…
Multiconfiguration WAGO Junction Box V2 – Waterproof and pole mountable This is the next-generation version of the original Multiconfiguration WAGO Junction Box – now upgraded with robust new features to meet real-world demands. CHECK ALL…
The Vase was printed on a Geeetech A10M with the dual color extruder hence the color gradient. Here is an article if you want to learn more about waterproofing a print. After a bunch of trial and error the following settings worked for me…
I was tired of dumping out the entire box of my favorite bandaids to find the size I was looking for. Designed this with slots for each of the waterproof bandaid sizes in the Nexcare box. Prioritized accessablity and visibility over…
Nice little accessory that clips over the buttons and around the handlebars of the VanMoof S3 / X3. Made by Voxel3D, and co-developed with Vanmoof in 2024! The cover prevents water from getting into the button electronics, which can cause…
New generation of my water-resistant cover that significantly reduces the risk of water entering the buttons. This can otherwise cause the well-known error codes 40 and 41, often leading to malfunctioning buttons. Perfect for all Moofers…
Nice little accessory that clips over the buttons and around the handlebars of the VanMoof S5 / A5. Made by Voxel3D, and co-developed with Vanmoof in 2024! The cover prevents water from getting into the button electronics, which can cause…
Narrow waterproof case with snap latch closures. Originally created to carry my https://www.printables.com/model/1350960-elevating-folding-laptop-stand, but can be used for many other things. Used 1.75 mm flex filament for gasket. Also…
Ninebot G30 Stealth Spacer Here we offer a few free spacers which can be 3D printed by everyone. Please note the license agreements before downloading or using these files. These spacers are NOT compatible with our aluminum floor system.…
I recreated it based on the original, but I didn't spent time creating all the grooves. I would recommend at the very least PETG since it will have some pressure from the closure.
These models are intended for personal use only. DO NOT copy, sell, trade or otherwise gain from my designs without my explicit permission.That being said, I can't think of any reason why anyone would use my humble shell for commercial…
I designed a waterproof cable gland for strain relief as the only ones I could find weren't water tight. The design is based on commercially available glands but is modified to be more printable and customizable. You will need TPU for the…
Easily add powerpole connectors to a go box, panel, etc. There are a number of other models that solve the same problem that I found, but there were minor things with each I didn't love – I've been using powerpole connectors for a very…
My friend needed a battery for his bicycle light, and I found the Lithium charger module that's available in 12v, 9v or 5v. Needed a case for it that can be attached to the bicycle frame, so I came up with this design that I created in…
I Really liked the original by martialmedia: Plug to waterproof Christmas lights and multi-prong extension cords https://www.thingiverse.com/thing:2210135 BUT I wanted something that would be much easier to print and not require supports.…
I have been doing some work on some of my john deere equipment, using waterproof connectors (AMP superseal clones) for making junctions when wiring flashers, lights, etc. One thing missing from the plug kits are caps to protect the female…
Loved the sensor design of the original, but for my use cases i wanted to use tabs to mount to a flat surface. i also designed a backplate that sits just proud of the case so that pressure is applied when firmly mounted. Printed the Case…
This is a waterproof housing for the forumslader (ahead version) , a device to charge your Phone with the hub dynamo of your bike in a very efficient way. It can be mounted under the top tube of your bike with zipties. There is also an…
A press-fit slot designed to add a shoulder strap attachment to the side of your waterproof hard foam case (like those commonly sold on AliExpress). Tight tolerance to stay firmly in place – once inserted, it won’t fall out when you open…
See this video for the use of these models: Learn how to create your own DIY solar-powered Meshtastic node in this hands-on guide designed for IoT enthusiasts and tech innovators! This video walks you through the entire setup process,…
This camera casing is designed to be an affordable and effective waterproof camera module holder! This module is compatible with a wide range of generic camera modules, such as the ones shipped with Eagle Ray ROV kits, and the one linked…
Update: https://www.printables.com/model/1467891-action-1-waterproof-casing-camera-cover-v2 A Camera Lens Cover for a Super Cheap Action Camera, only $50: (aff. https://amzn.to/47FueQV) Made out of TPU, flexes and fits onto the outer…
Update: Added Looser Tolerance Design (use that one!) A Camera Lens Cover for a Super Cheap Action Camera, only $50: (aff. https://amzn.to/47FueQV) Made out of TPU, flexes and fits onto the outer waterproof casing. Improved for better…
Gasket for "Waterproof Solar Enclosure for LoRA Node". Printed with TPU material. Uszczelka do „Waterproof Solar Enclosure for LoRA Node". Druk z materiału TPU.
![ESP32 + PN532 NFC Module Case [Waterproof]](https://media.printables.com/media/prints/1069827/images/8093768_c0631fd9-f6cf-4489-a895-df58f6477074_8d74c501-1612-4c6c-a51e-08b0623ff4a2/screenshot-2024-08-31-202814.png)
