Diamond Flower Vase (waterproof)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A nice geometric vase for (dry) flowers
- Rating
- 4.864 / 5
- Likes
- 279
- Downloads
- 1,803
- Makes
- 25
- Views
- 4,861
- Reviews
- 22
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Vase was printed on a Geeetech A10M with the dual color extruder hence the color gradient.
Here is an article if you want to learn more about waterproofing a print.
After a bunch of trial and error the following settings worked for me to waterproof the vase:
- 8 bottom layers
- Slow print speed of 25mm/s
- Line width of .8mm
- Layer height of .3mm
- A .6mm nozzle
Since I did the prints with a Geeetech machine, I sliced the STL in Cura. The profile is also uploaded as a .txt (.curaprofile is not supported) if you want to recreate my settings in PrusaSlicer.
The height of the vases in the pictures is 22cm.
The material I used was PolyTerra PLA Arctic Teal, Candy and Renkforce PLA white.