Diamond Flower Vase (waterproof)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A nice geometric vase for (dry) flowers
- Ocena
- 4,864 / 5
- Polubienia
- 279
- Pobrania
- 1801
- Wydruki
- 25
- Wyświetlenia
- 4855
- Oceny
- 22
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Vase was printed on a Geeetech A10M with the dual color extruder hence the color gradient.
Here is an article if you want to learn more about waterproofing a print.
After a bunch of trial and error the following settings worked for me to waterproof the vase:
- 8 bottom layers
- Slow print speed of 25mm/s
- Line width of .8mm
- Layer height of .3mm
- A .6mm nozzle
Since I did the prints with a Geeetech machine, I sliced the STL in Cura. The profile is also uploaded as a .txt (.curaprofile is not supported) if you want to recreate my settings in PrusaSlicer.
The height of the vases in the pictures is 22cm.
The material I used was PolyTerra PLA Arctic Teal, Candy and Renkforce PLA white.