'Waterproof' cap for 1T4 electric bike wiring harness
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cap for unused connectors on waterproof e-bike wiring harnesses, to keep them waterproof.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 101
- Makes
- 1
- Views
- 478
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
On my custom built electric bike, which uses a 1T4 waterproof wiring harness/plugs, I did not use the electric cutoff brakes because my brakes are built into the shifter. As a result, I had two unused plugs hanging off the front of the bike, exposed to weather and dirt/sand. I wanted to cover it, so I made this model.
Hopefully it fits snug enough to be waterproof on its own, but to be safe, I filled my connectors with dielectric grease before installing the cap. I did the same with all other connectors, used or unused, on the bike and I would recommend that too.