Search results: ebike

cover for ebike electronics box

cover for ebike electronics box

Hailong battery mount for ebike

I made this to attach the battery of my Hailong/Bafang motor on my 48mm diameter frame tube. I drilled 5mm holes in the aluminum tube and used rivets to keep it in place. Use 4mm zipties to wrap the plastic piece for extra stability.

full hand twist throttle fitting for ebike thumb throttle

1) print with 100% infill ! 2) non-grip version: ebike-s73-throttle-v3 3) grip friendly version: super-thin model: ebike-s73-throttle-v5_super_thin

Ebike Battery Downtube spacer V1

Profile created for supershark battery and Merida Ninety Six Downtube. Printed with 2 walls and 15% lightening infill has holes for cable routing This does max out my printer size.. Maybe V2 will be a 2 part model..

Bosch eBike Protection Plug Remix

Remix of a super nice design, only the attach method is different. I printed it in TPU 96A.

Beachman 64 ebike adapter for Beeline AMPS Mount

Adapter to install Beeline Moto II GPS unit with power insert on my Beachman 64 bike leveraging Beeline's AMPS mount

Bosh eBike Charger Wall Mount (BCS230 & BCP3400)

A minimalist and clean wall mount holder for Bosch eBike chargers. Keep your garage or workshop organized with this custom-designed wall holder. It features a central cutout that keeps the original Bosch logo visible while securely…

Bosch eBike Charging Station with Sonoff Switch

Built on @felix's model to simplify usage and enable me to create some automations. I used a Sonoff S31 which enables me to monitor energy consumption and remotely turn the power on/off. I use ESPHome (on the S31) and HomeAssistant to…

Samebike LO26-II Screen protector

Print with TPU, top side facing print bed; no supports required. If you have a bike with different display size, feel free to modify attached FreeCAD file.

Wandhalter+Bosch++eBike+Battery+Charger+36-4_320+v5 no cable holders

I wanted to print this on a Voron 0.1 And that can only handle 120 x 120 mm So I cut off the holders for the cables.

amazon ebike battery display mount for handlebar

amazon ebike battery display mount for handlebar

Ebike Battery to USB-C Dongle

A simple printed box to get a USB-C port from a max 14s Ebike battery. This will allow you to hook up to an ebike battery with a maximum 60v and get a 65W USB-C port. Here are the things you need to buy all supplies can be found on…

ebike electronics box

ebike electronics box

cover for ebike electronics box

cover for ebike electronics box

Charger dock Bosch ebike

Fits 4 amp Bosch ebike charger

(60mm) DIY Ebike Brake Light Stealth Bomber Frame Bracket

Brakelight/Taillight bracket for cheap chinese ebike light kit with 60mm spacing . Mounting holes meant for 35mm spaced seat bolts on stealth bomber seats. Actual mounting holes are made with 5mm space in either direction for adjustment.…

WIRED/ECELLS EBIKE REAR BATTERY BUMPERS

Simple fix for WIRED AND ECELLS rear battery rattle while riding printed in Ninja Flex 85a or any TPU 85a. Mix and match your bumpers only 2 are needed in most cases. The Printables fee is 20% of the sale price. Ouch!

Ebike Elux Holder

Ebike Elux Holder, 3d print designed to hold ten E-Lux vape batteries, can be slotted together to create a larger array. 13 were used to create a 48V E-bike battery pack as seen in this video

(70mm) DIY Ebike Brake Light Stealth Bomber Frame Bracket

Brakelight/Taillight bracket for the (less) cheap chinese ebike light kit with 70mm spacing . Mounting holes meant for 35mm spaced seat bolts on stealth bomber seats. Actual mounting holes are made with 5mm space in either direction for…

Orbeca Ebike Charger Holder

Wall month for Orbeca Ebike Charger. Printed with PETG 0.20mm Structural. Print it standing upright.

Remixed Sabvoton Controller Wire Cover (Modded for Stealth Bomber Ebike Frame)

I modded the original design to taper towards the top to better fit a Chinese stealth bomber frame profile. This is mounted on the underside near the forks. Using a SVMC72150 controller. I also increased the height of the base piece by…

Chainguard Yamaha-Ebike

I printed it out of PETG and it worked for one season now. It is mounted at the two screws of the lower cover.

eBike

Das ist eine neue Version von meinem älteren Modell. Ich habe es etwas korrigiert und einen neuen Sockel der mehr Freiraum zur eigenen Gestaltung zulässt hinzugefügt.

improved wall bracket for Bosch ebike battery "PowerPack 500" - now with cutout for battery status indicator

better cutout to see the battery status indicator. (bigger than on the image, did not print out the latest version yet)

Cover for Rosenberger ebike charging plug

The Rosenberger ebike charging plug has 2 strong magnets inside. If the charging plug is on the floor, small metal shavings could collect on the plug. These can then remain in the battery socket when charging. If after charging the motor…

ebike para dummy

aqui dejo esta ebike maqueta valida para los dummy ,se le puede poner una goma elastica que ara de cadena..la suspension por el interior son pequeños muelles que se pueden conseguir de un boligrafo…son piezas delicadas y chica ..segun…

Bosch Ebike Motor Cover (Trek)

The Bosch branded cover fell off my motor. I decided to make my own one. I dont think my friend who owns a Husqvarna likes it very much. 🤣🤣🤣

Gasket for ebike

I used TPU. This made the controller compartment more waterproof, especially with a little sealant. It also reduced the knocking noise when driving.

Bosch 36V Ebike Battery connector with CAN pins (5 pins) 100W

Use an Arduino with MCP2515 to Power on the Ebike battery (MCP2515 lib needed) Used the components as described in https://www.printables.com/model/49417-bosch-36v-ebike-battery-connector-diy-2a-charger Isolate with heat shrink and hot…

Bicycle Water Bottle Cage Strap Bracket for eBike

My E-bike unfortunately does not have cage holes on frame, this is the adapter for hang it on bike frame Anywhere Bottle Cage Adapter with Velcro (Hook And Loop Fastener) i used sqaure m5 nut. and 100 mm width Velcro I also added CAD…

Ebike Battery Holder

Hotend on the way so will update when i can test it. The lid should work for both sides and im using zipties to secure the holder to the bike. the box is made for a 198x95x70mm taped over ebike battery (20AH 36v). The holder is pretty…

EBike Pedal Assist - Hall Sensor Trigger Wheel

Magnet wheel for pedal assist ebikes. The original part broke off my ebike, preventing the pedal assist from triggering. This was specifically designed for the 700c Hyper E-Ride City by Hyper Bike Co., but can probably fit on most pedals.…

Wall Holster for Bosch eBike Battery Charger 36-4

A wall mounted holster for a Bosch 36-4 eBike charger so I dont keep kicking it around on the floor. Holds the charger pretty securely, it's not going to fall out. Jan-2020 : I have uploaded a new version of this; with a clip to hold the…

NexGen3D: Dewalt eBike BoostPack - 18/36/72v

I wanted an easy way to extend the range of my bike, and to leverage the batteries I already own, so I created the BoostPack. Features: Can use the following Dewalt batteries: 5ah 18v Standard 5ah 18v PowerStack 8ah 18v Standard 8ah 18v…

Wandhalterung für Bosch eBike Akku

Im Slicer habe ich negative Teile hinzugefügt, um die Belüftung während des Ladevorgangs und die Kabelführung im nachhinein zu verbessern. Es geht sich auch ohne. Wenn nicht erwünscht, im Slicer unter Objekte auswählen und löschen

Battery and Controller Mounts for Fat Tire EBike

Quick Prints to mount a battery and controller in a bike frame. This project requires a little bit of modifications and some handiness with bicycles, and is probably only worth while if you have a fat tire bike already that you want to…

Bosch Ebike Charger Holder

Bosch Ebike Charger Holder

Bosch eBike Compact (2a) Charger Hanger

⚠️ Important! This model works with the 2 amp “compact” Bosch charger model BCS230. Please check the following picture and make sure your charger matches. ➡ Do you have the larger 4 amp “standard” charger? Click here to go to the variant!…

Bosch eBike Standard (4a) Charger Hanger

⚠️ Important! This model works with the 4 amp “standard” Bosch charger. Please check the following picture and make sure your charger matches. ➡ Do you have the smaller 2 amp “compact” charger? Click here to go to the variant! About this…

Ebike, hydraulic brakes, magnet holder

I bought e-bike conversion kit and it comes with sensors for the brake levers to shut off motor when braking. Usually you stick the sensor and the magnet to the levers and you are good to go. Not in my case. The magnet travel was minimal…

Bosch eBike Charger Wallmount (2A Compact Charger)

This is a remix of Svw Bosch eBike Charger Wallmount model to add an option for the smaller 2A Bosch compact charger (see last image to see if your charger is compatible with this model) Printing: I recommend printing in ASA or PETG for…

Wall mount for Bosch ebike Battery Charger 36-4/230

Wall mount for Bosch ebike Battery Charger 36-4/230. It offers a small tray, a hook and holder for both plugs. Prints without supports.

No Access Sign for eScooter, eBikes, Camper and Tracked Vehicles

Traffic Signs - No access for: Escooter Ebikes Campervan Tracked Vehicles Printable with single extruder (No fancy stuff, No AMS needed) Size: 160x160mm | Height 3.2mm Print: Layer height: 0.2mm (for 0.4mm nozzles) Perimeters: 2 Infill:…

Wall mount for Bosch ebike Battery Charger 2A BPC3200

Compact wall mount for Bosch ebike battery charger 2A BPC3200 with holder for both plugs and routing of the power cable on the rear side. Due to the edge on the underside, the print is made at an angle, which leads to better layer guidance.

Wall mount for Bosch ebike Battery Charger 4A BPC3400

Compact wall mount for Bosch ebike battery charger 4A BPC3400 with holder for both plugs and routing of the power cable on the rear side. Due to the edge on the underside, the print is made at an angle, which leads to better layer guidance.

Wall mount for Bosch ebike Battery Charger 36-2 BCS230

Compact wall mount for Bosch ebike battery charger 36-2 BCS230 with holder for both plugs and routing of the power cable on the rear side. Due to the edge on the underside, the print is made at an angle, which leads to better layer…

Mount socket for Bosch eBike Smartphone Grip and DJI Remote Controllers

The socket has to be attached to the controller by using epoxide glue. Take care to use the right glue fitting to your print material to get a tight connection. Otherwise the RC can fall off and get damaged. The socket is measured to fit…

Universal Ebike Brake Switch Mount for Hydraulic Brake Levers

First release of an adjustable silicon glue/ zip tie mountable brake switch holder for kw12 micro switches ( buy here: https://www.ebay.de/itm/183765013263 ) I tried it's fit on a Shimano, Meroca and a Zoom brake levers, if you try on…

Bosch EBike Charger 6A Wall Mount BCS250

Easy to print. Fit's little tight, so feel free to adjust using the Fusion360 file.

Super73 eBike kickstand 3D printed extension (sand friendly)

Yamaha Display C Mount Halterung EBike

Yamaha Display C Halterung Diese Halterung wurde speziell für das Yamaha Display C entworfen und als 3D-Druck realisiert. Sie wird mit Kabelbindern sicher am Lenker befestigt. Der Druck in PETG wird empfohlen, da das Material robust und…

Bicycle panniers hooks adapter for Gazelle ebike MIK rack

My old panniers had simple aluminum hooks for hanging it on the rack. They didn't work very well with my new Gazelle C8 e-bike that came with MIK rack. These adapters allow me to hang my pannier on the new bike without having to wory…

ebike twist to thumb throttle conversion

e-bike throttle modification kit These files should help you modify your twist throttle to thumb style. My motivation was to convert it so I can use classic bicycle grips on my folding e-bike without need to spend money on different…

eBike Battery with Holder

Model of the very standard shark battery for your eBike design projects. This particular model is the “Jumbo Shark” version which has no space for controller. Mount is accurate. Battery is just a mock up, not too precise and detailed. Two…

eBike shark battery mount plate with connection box

Extra mount plate for the typical Shark battery mount for better fitting on 35mm diameter frame (like Salsa Fargo or such). There are three different models. Complete mount with controller box. Only mount. Only controller box. See pic…

Bosch Powertube Smart eBike battery holder with LED

Added fiber optic path for charging light indicator to the “eBike_Powertube_Smart_Bottom-Vertical-Front” version

Ebike Battery Mount (Hanging Mount) - 55mm wide

I made a few changes to suit my want. I did not want to put any screws into my wall or furniture. So I made it similar to a clamp clipping onto a 1" horizontal edge. Another big difference is, my battery holder slot was only 55mm wide…

Bosch eBike Charging Port Cover / Ladeport Abdeckung

Replacement cover for Bosch eBike (Cube eMTB 2024) charging port. (Ersatzabdeckung für Bosch eMTB Ladebuchse.) v4 = flat bottom v5 = added a pattern for easier opening (not really needed) I suggest to enable ironing (all top surfaces). No…

Hailong Ebike Battery Multiconnect/Multiboard

Hailong ebike battery mount with multiconnect slot on the back.

Bafang Ultra Slim Shark eBike Battery Cover

This is a cover for the battery contacts of the Bafang Ultra Slim Shark eBike Battery assembly when you take out the battery. Reposted from my own thingiverse post!

EBike Display Cover (M5 Display/Lectric)

EBike Display Cover for M5 Display or on other m5 based displays like the Lectric Lineup.

Kettenblattschutz Cube Reaction Hybrid Ebike

Kettenblattschutz zum anklipsen an das Ritzel, ohne Schrauben oder Werkzeug

Gas Gas ebike battery tray tightening tool

I printed the model with 75% infill, .6 Nozzle using a carbon fiber PLA.

Aventon Level EBike Battery Latch Release Lever

A simple to print replacement knob for the battery release latch on an Aventon Level. It may fit the Level 2 as well, I have not tested, but they look similar. Printed in ABS on a Bambu X1 with supports.

Bloody Mudguard - Bloody Fender - Bloederige Spatlap (for my Decathlon Elops 920 EBike)

print it upside down for the best result **update 24/05/2022** : added a version with teeth…

eBike MBM Funk Cross

Ich fand das Original interessant. Daher habe ich dazu ein Modell entworfen. Die Base ist gleich und passt sowohl für das Modell mit und ohne Speichen. Der Rest ist Geschmackssache. Über Eure Makes und Kommentare würde ich mich sehr freuen.

Neco Mid drive MM18 ebike half gasket lingbei hurley riptide

Half gasket for MM18 neco / lingbei motor. Hurley Riptide E-Bike If you need parts for these motors contact me.

Batavus sparta ebike round display holder

WARNING: This is not original part of the manufacturer. You might lose your warranty. Print and use it at your own risk. This part is intended to hold display with broken handles to its base. After installing it, you can't remove display…

Hailong battery mount for ebike

I made this to attach the battery of my Hailong/Bafang motor on my 48mm diameter frame tube. I drilled 5mm holes in the aluminum tube and used rivets to keep it in place. Use 4mm zipties to wrap the plastic piece for extra stability.

ebike headlight mount bike electric mountain

Mounts between handlebar clamp to fit a Ebike headlight. -No supports needed

TruckRun Mokwheel screen mount ebike

Screen mount for the Truckrun digital screen ( used on mockwheel onyx) -No supports needed

Schutzdeckel für Rosenberger eBike Motorstecker

Wird das eBike auf dem Heckgepäckträger transportiert, schützt der Deckel den empfindlichen Motorstecker, insbesondere wenn man im Regen fährt. Zwar sind Magnete mit eingebaut, aber durch den Schlitz oben kann man zusätzlich einen…

Ebike

with just a hub motor and a cheap controller and electronics you can make an electrically locomoted bicycle! Right now it works with rubber-on-rubber contact, however I am currently working on attaching gears and using a chain! Its…

eBike pas magnet adapter - gear replacement

adapter for the pas sensor replacing the smallest gear. Recommended using glue for long-term useage Suitable for use when there is little space for standard installation Maybe it will be usefull for someone

Ebike/escooter Twist throttle

Use the grip as shown on the photo The rotor has cuts for clamping part of the throttle. You need to cut the clamping part on the other side of the grip and than use the grip clam to secure the handle. Read details about hall sensor and…

eBike Charger support

This charger was designed to be hung on a bticino box with these measurements: L10cm x H8cm x D4.5cm. The charger instead has these measurements: L19cm x H9.6cm x D 4cm

36v 10s4p 18650 battery pack for ebike with no welding connection

36v 10s4p 18650 battery pack for ebike with no welding connection, just pressed together nickel tapes strips Made in Autodesk Inventor (ipt file included)

Ebike 10s4p 36v 18650 battery pack case

Ebike 10s4p 36v 18650 battery pack case Made in Autodesk Inventor (ipt file included)

Ebike 10s4p 36v 18650 battery pack mount

Ebike 10s4p 36v 18650 battery pack mount Made in Autodesk Inventor (ipt file included)

Ebike Vanity Plate

*EDIT 10/21/25 Added a flower design I made for my sister's bike. ______________________________________________ I designed this specifically for my Heybike Mars 2.0 1000w, but it may fit others with front basket mount. Center-to-center…

Recumbent ebike battery and motor mount

Standard ebike conversion kits don't fit recumbents well. So I made a mount to fit the battery pack on the back of the boom and the chainstay. I also made a insert so that it is easy to make an anti rotation bracket for the motor out of a…

Perfomer Goal Recument ebike conversion battery mount

Use at your own risk. No engineering skill is promised here. This is a mount to allow you to install the 'standard' Chinese downtube battery pack onto a Performer Goal recumbent. It might fit others in their product line, I'm not sure. It…

SHC eBike Charger Wallmount

I needed a wallmount for an eBike, so here is my design. Designed for a rectangular charger 72 mm wide, 41 mm high and 180 mm long (can be almost any length) Instruction: Material: PLA or PETG Nozzle size: 0.4, 0..6 or 0.8mm Infill:…

Wandhalter für Bosch eBike Intuvia Fahrrad Computer (Display) und Schlüssel

Eine Wandhalterung für den Intuvia Fahrradomputer von Bosch. Dieser wird von oben aufgeschoben. Daran kann man dann gleich auch noch die Schlüssel hängen, damit man gleich alles beisammen hat. Gedruckt habe ich das in PLA+. Aber das Teil…

Wandhalterung für Yamaha eBike Computer und Schlüssel

Eine Wandhalterung für den Fahrradcomputer von Yamaha. Dieser wird von oben aufgeschoben. Daran kann man dann auch noch die Schlüssel hängen, damit man gleich alles beisammen hat. Gedruckt habe ich das in PLA+. Aber das Teil kann man…

full hand twist throttle fitting for ebike thumb throttle

1) print with 100% infill ! 2) non-grip version: ebike-s73-throttle-v3 3) grip friendly version: super-thin model: ebike-s73-throttle-v5_super_thin

Bosch ebike lock ring tool gen2

I added an optional wrench that can be added. It has a nice snug fit to the tool (you may have difficulties getting it off again). The tool also has a square hole to fit a 3/8 inch ratchet handle. A steel tool may be more durable, but if…

sw900 ebike display full cover

Printed in PLA without supports

USB PD charger for 36V lithium battery (e.g. Bosch ebike, Xiaomi 2 pro escooter)

I wanted to be able to charge my bosch ebike without the availability of 230V AC and without having to carry around the big original charger. To be able to charge a bosch ebike two voltage levels are required, 5V to set the battery to…

Ebike 20mm BMX Handlebar Swap Screen Bushings

These bushings were designed for my Heybike Mars 2.0 ebike, to adapt the screen's mounts when swapping the original giraffe neck handlebar setup to 20mm BMX handlebars. They fit between the mounts and the 20mm bars, ensuring a secure and…

Kids Ride Shotgun Spacer for Canyon ebikes

Update 2025-09-15: Added a shield to the top spacer to prevent the wire going into the handlebar through the stem from getting tangled on the screw. Uploaded as a new step file v2. Designed a custom spacer kit to install onto a Canyon…

Back LED seat mount for Jasion X Hunter ebike

The X hunter comes with a rear rack, which is nice, but I don't ever use it, it makes annoying rattling sounds, and weighs 2 whole kg. So what if we got rid of it? Easy enough to remove, but then there's nowhere to put the rear light! See…

18mm ebike protective tpu nut cover

This model perfectly fits 18mm lugnuts for bikes and scooters, features a retention loop to zip tie through for additional security if desired. This fits so well that getting it off requires a good amount of force, or prying, be warned.…

Wired eBike Rack Wedge

The rear fender on my Wired Warrior eBike was rubbing on the tire. Not sure if the cargo/battery rack geometry was bent or just badly designed. Developed this wedge as my first part design to raise up the rack and give some space between…

Ladegeräthalter Charger Holder Giant ebike

Ich habe mir eine Wandhalterung für das Ladegerät meines Akkus meines Giant ebikes gemacht. Die meisten Halterungen sind für andere Hersteller und passten nicht für die Abmessungen meines Gerätes. Diese Halterung ist für das Ladegerät Typ…

Giant ebike Ladegeräthalter Charger Holder

Diese Wandhalterung für das Ladegerät meines Akkus meines Giant ebikes habe ich mir gemacht, weil die meisten Halterungen für andere Hersteller sind und für die Abmessungen meines Gerätes nicht passen. Diese Halterung ist für das…

Giant ebike cable cover

I needed a way to close the cable access port on my bike after routing a cable to my ebikes wire harness.

U-lock holder for Gazelle ebike MIK rack

This small fixture snaps onto the rear rack of Gazelle ebike (on one of the thin cross-bars) and keeps your u-lock in place so it doesn't fall of. You still need the rubber expander to hold it, but in my case just the expanders were not…

Ebike Battery Downtube spacer V1

Profile created for supershark battery and Merida Ninety Six Downtube. Printed with 2 walls and 15% lightening infill has holes for cable routing This does max out my printer size.. Maybe V2 will be a 2 part model..

EBike (folding bike) - modell 15cm

The bicycle was too big for the birthday table and only a picture to boring, but the small modell fits perfectly there. I designed it with Fusion 360 and printed it in two colors on my Bambu Lab H2D with PLA. No support is needed.