1 / 4
Gridfinity Tool & Accessory Box for Cube eBike (and Others) — image 1
1 / 4

Gridfinity Tool & Accessory Box for Cube eBike (and Others)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Aren't you also searching for accessories that came with the new bike or you bought tools and spare parts?

Rating
0 / 5
Likes
38
Downloads
183
Makes
0
Views
1,769
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Aren't you also searching for accessories that came with the new bike or you bought tools and spare parts? 

I got new bike recently and with it a lot of paperwork (manual, descriptions, …) came with it, as also some spare parts or adjustment tools. Where the heck shall I store these items, in order to find them when I need them?

For similar purposes I am already used to build individual, personalised tool and storage boxes. Since I learnt a bit around GRIDFINITY, my idea was to build a box around gridfinity bins.

So in TinkerCAD I created a toolbox, fitting typical gridfinity grid of 4x6. I build the box in three (3) levels: level 1 = bottom for papers and manuals. A thicker grid (level 2) with access holes is sitting on several support triangles, so I can take the grid out. Level 2 is filled with bins of 31.75mm (height units = 4). On top of this sits another grid and has latches on each short side, to take the complete grid out. Level 3 is filled with bins of 24.75mm (height units = 3). You can also exchange the heights, e.g. 31.75 on top as level 3 and 24.75 as level 2. 

But the box is designed that (see files area) the first grid is a closed bottom grid, then one level of bins, then the “open” grid, another set of bins, then the lid is closed, and the box is full so far.

The 4x6-grid allows me a lot of variations to arrange standard bins 1x1, 2x1, 3x1, 2x2, 2,3, … This is the most flexible system of arranging parts, tools, etc. I have ever experienced.

The main box come in two versions, one with a indented area for an individual plate (I choose the Cube-logo), a second box without indent. If you want, you can add the reinforcement-stl for the rear of the box, which enables you to stand the box upright. You may run risk to have parts in the box coming mixed up. So I decided not to use the reinforcements.

Same with the lid, two versions.

The hinge comes from another guy (@MichalFanta) Michal Fanta's S-box. Thanks for this hinge.

Only few bins are subject of this post. In Printables, there are thousands of bins in Printables for download.

I printed the parts in PLA, glued in the plates. Hinge in PETG. As for the hinges I used 30 / 35mm dowel pins instead of M3x30/35mm screws. I feel dowel pins are a bit more elegant. Up to you!

As the size is exceeding 250mm you unfortunately cannot print it on Prusa MK3/MK4, I printed it on my Voron 2.4 (350). Downsizing to something like 250mm to fit a MK3/MK4 printer is limited to the fact, that the bins also need to be downsized by this percentage. And then you're out of Gridfinity rules. Bear this in mind.

A 5x4 box is also available since 07-Nov-2023 https://www.printables.com/de/model/639908-universal-gridfinity-box-for-4x5-grid

Anyway I hope you like this post, I wish you happy sorting, happy printing.

Explore my other Printables: https://www.printables.com/de/@Tritschi 

I added two Plain plates (Front and Top) for your own design and bike-brand!

Tags