Gridfinity Tool & Accessory Box for Cube eBike (and Others)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Aren't you also searching for accessories that came with the new bike or you bought tools and spare parts?
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 183
- Wydruki
- 0
- Wyświetlenia
- 1769
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Aren't you also searching for accessories that came with the new bike or you bought tools and spare parts?
I got new bike recently and with it a lot of paperwork (manual, descriptions, …) came with it, as also some spare parts or adjustment tools. Where the heck shall I store these items, in order to find them when I need them?
For similar purposes I am already used to build individual, personalised tool and storage boxes. Since I learnt a bit around GRIDFINITY, my idea was to build a box around gridfinity bins.
So in TinkerCAD I created a toolbox, fitting typical gridfinity grid of 4x6. I build the box in three (3) levels: level 1 = bottom for papers and manuals. A thicker grid (level 2) with access holes is sitting on several support triangles, so I can take the grid out. Level 2 is filled with bins of 31.75mm (height units = 4). On top of this sits another grid and has latches on each short side, to take the complete grid out. Level 3 is filled with bins of 24.75mm (height units = 3). You can also exchange the heights, e.g. 31.75 on top as level 3 and 24.75 as level 2.
But the box is designed that (see files area) the first grid is a closed bottom grid, then one level of bins, then the “open” grid, another set of bins, then the lid is closed, and the box is full so far.
The 4x6-grid allows me a lot of variations to arrange standard bins 1x1, 2x1, 3x1, 2x2, 2,3, … This is the most flexible system of arranging parts, tools, etc. I have ever experienced.
The main box come in two versions, one with a indented area for an individual plate (I choose the Cube-logo), a second box without indent. If you want, you can add the reinforcement-stl for the rear of the box, which enables you to stand the box upright. You may run risk to have parts in the box coming mixed up. So I decided not to use the reinforcements.
Same with the lid, two versions.
The hinge comes from another guy (@MichalFanta) Michal Fanta's S-box. Thanks for this hinge.
Only few bins are subject of this post. In Printables, there are thousands of bins in Printables for download.
I printed the parts in PLA, glued in the plates. Hinge in PETG. As for the hinges I used 30 / 35mm dowel pins instead of M3x30/35mm screws. I feel dowel pins are a bit more elegant. Up to you!
As the size is exceeding 250mm you unfortunately cannot print it on Prusa MK3/MK4, I printed it on my Voron 2.4 (350). Downsizing to something like 250mm to fit a MK3/MK4 printer is limited to the fact, that the bins also need to be downsized by this percentage. And then you're out of Gridfinity rules. Bear this in mind.
A 5x4 box is also available since 07-Nov-2023 https://www.printables.com/de/model/639908-universal-gridfinity-box-for-4x5-grid
Anyway I hope you like this post, I wish you happy sorting, happy printing.
Explore my other Printables: https://www.printables.com/de/@Tritschi
I added two Plain plates (Front and Top) for your own design and bike-brand!