1 / 2
Bosch 36V Ebike Battery connector with CAN pins (5 pins) 100W — image 1
1 / 2

Bosch 36V Ebike Battery connector with CAN pins (5 pins) 100W

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I wanted to be able to use my Bosch Powerpack 500 battery as a powerbank.

Rating
0 / 5
Likes
3
Downloads
97
Makes
0
Views
735
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

Use an Arduino with MCP2515 to Power on the Ebike battery (MCP2515 lib needed)

Used the components as described in

https://www.printables.com/model/49417-bosch-36v-ebike-battery-connector-diy-2a-charger

Isolate with heat shrink and hot melt glue. Use a multimeter to assure all isolation is good.

Tested with 100W load.

The connector is not tested at maximum power (not equivalent to original) 

The cable gland can be used with two separate cables two wire for CAN three wire for power output and 5VDC to enable charging.

BE CAREFUL: short circuiting the Ebike battery or other misuse is VERY dangerous and can result in fire, explosion and heavy injury!