IP Waterproof Box 150x100x80mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Waterproof box with sealing. Used for electronics and other stuff
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 467
- Wydruki
- 1
- Wyświetlenia
- 1741
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — NoDerivatives
We have needed some waterproof boxes to install some cables in it. as the shipping time was too long I've decided to print them with 3D printer.
First 2 boxes were printed with PLA, should be waterproof.
Another attempt will be made with ABS.
Anyways 6 walls, 6 tops and 6 bottoms (to achieve 100%infill)
-----version updated------ (Bottom v2.1 and sealing ring scaling fixed, Sealing ring v2.1 raised from 0.6 to 1.2mm)
-sealing ring needs to be printed with TPU (pls don't use AMS-BambuLab)
-use normal screws (30-45 mm length) for wood or for plasterboard (for the best result pre-drill a hole with small drill to avoid breaking) (tip v2: you can use soldering iron tip-nuts with m2,3,4 bolts)
Needed time aprox. 5-6 Hours.