Counting matching models…
Description Recreation of the Benchy (remodelling to step) for making the helix spin & passthroug Benchy! Print Recommendations Supports: ON Passthrough The cabin can fully go through the main body. Chimney is slightly cut to allow this.…
No supports needed, just 35% infill to have the best sound quality. Materials: Cushion interior 4" speakers 8$ Amp from ali RCA connectors DC connector 12v Charger
This tool is handy for quickly setting the tension on late model KTM/Husqvarna/Gas Gas 125-501 dirt bikes that has a specified slack of 55-58mm, measured between the top of the swing arm and the bottom of the chain. Note: this has only…
3D Print a modular case for the New Raspberry Pi 4 and Pi HQ Camera! Snap fit pieces makes it easy to swap out covers and can be printed without any supports! #3DPrinting #Raspberrypi #PiHQCam #Adafruit Learn Guide…
Enclosure for raspberry pi zero with HQ camera (flex cable inside). Feel free to adapt the model to your needs. The image quality of the camera is beautiful, and I'm happy with the result. I found a project called ShowMeWebcam, which…
This is a very simple box for the new Raspberry Pi HQ camera module as I wasn't comfortable having a bare PCB flapping around. To install the module carefully remove the rear focus adjustment ring. Screw the module down into the case with…
I needed a stronger X-Axes camera holder than the ones available, this one is strong enough to not get a wobbly camera. Camera can pan and tilt. You will need a nut and bolt (M5) or similar. Mount is GoPro compatible, I used this thing…
1. Introduction Hi! In this post, I will be covering everything about a simple drone gimbal I designed for the Raspberry Pi HQ Camera using the small & cheap SG90 servo motors. My goal was to design a simple-to-make and simple-to-use…
Remix of 3D Elf's model, rebuilt from scratch for higher quality/higher polygon density. Features more subdivisions around all circumferences, bevels on the caps of the whiskers, and a centering notch for the hairpin. I found the original…
EDIT 07/09 @ 1:58 PM: Due to the urgency of our situation, this collection was uploaded with files designed by Prusa Research without me realizing, I have removed said files but will link them so you can find them, the remaining designs…
This is an adaptation of the camera back from the Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 , inspired by and simplified from the Raspberry Pi Hi Quality Camera Case Adapter . I've adjusted the back plate of the…
I liked the mounting system created by Sneaks. But it did not fit my Raspberry HQ camera. i made this case to fit on the arm with the same ball system as the original case. I printed it in PETG. Its made to be a tighth fit with the…
I've built an enclosure with an Ikea Lack. Recently I've baught a Raspberry Camera High Quality(the one with interchangeable lens. I created a mount, which can pivot in 2 directions. I've printed it without support. It requires: 1x m3…
C/CS Mount Extension Tube (8mm to 65mm) for Microscope, Raspberry Pi HQ Camera, TV Lens, Macro, etc. Print at 0.1mm layer height for best results. No supports needed for printing. May need brim when printing long extension tubes.…
Lamborghini Super HQ Category: 3D Printers
I used the holder with the Raspberry Pi wide-angle lens with a focal length of 6 mm. See technical drawing for exact dimensions. Print PLA 0.2 mm layer height printed as four pieces joint 2 w/ support 20% infill Additional material M2x 8…
A very modular camera arm for the Prusa mk3/s. You can mount it on the X-axis motor as a moving arm, or on the aluminum extrusion frame as a fixed arm. The fixed mount also works on any other 40x40 aluminum extrusion. It also comes in two…
MATERIAL Raspberry Pi 4b Raspberry HQ Camera C-mount lens. In my case a 100mm telephoto lens . Cooling housing for RPi 4b (total height below 24mm) Anker 2000PD or Anker 325 Powerbank USB-A to -C cable Threaded inserts for tripod mount. I…
Print Settings PLA 0.2mm Layer 0.6mm Nozzle Additional Parts 4x M2.5x8mm socket head 4x M2.5 hex nut
Use Nikon lenses on the HQ camera (Cmount) Print instructions print at least in 0,1 mm layers. I used a -0,1 horizontal expansion on my Ultimaker2 to get the fine thread to fit, some other printers may need a bit more correction.
Raspberry Pi HQ (and similar) cameras adapter for AmScope Trinocular microscopes. It threads into the camera's C/CS-mount (no lens required) and reuses the tube+knob focus mechanism on the scope. Single piece, prints without support and…
A mix of a raspberry pi aluminum case with a RPI HQ camera enclosure. I wanted to re-use the back part of the aluminum case for a better cooling effect and added the HQ camera on the front. During the development of my web application for…
A replica of the badge from the HQ Holden Monaro suitable for your toolbox or cabinets. The .3mf file has the colour change setup for you.
I got a kit with a laser cut adapter and a 150mm cable wich was too close to the USB cable. So I redesigned the mount in FreeCAD first and then later turned the Raspberry PI Zero Mount by 90 degrees, so a short 40mm cable can be used.…
Space Port Central HQ At the end of the day, someone's got to run things. Usually, it's the guy with the most guns. That said, the Space Port HQ has six separate guns, keeping the natives good and restless. Keep your authoritarian figures…
This case doesn't require any additional hardware, it just snaps in place. I suggest printing it with PETG but also PLA should work as well. To make the snap fit work propely be sure that there aren't any debris in the way left after the…
Built for unstoppable ground assaults, the Earthquake lives up to it's name in sheer firepower alone. Supportless and easy to print on FDM, this 6mm mech prints in just 2 pieces! The bottom usually prints very easily but the top requires…
Are your car keys feeling lonely? Or do you want a silhouette of your car? Look no further! You can add a nice-looking keychain or a silhouette of a Nissan Qashqai SUV for both cases. 0,4 nozzle 0.2mm layer, 2 walls No support needed. I…
This is a HOTAS throttle body for the VKB THQ throttle quadrant. It is loosely based on a simplified version of the F-18 HOTAS profile. If will fit nicely onto the long metal throttle levers that are included in the THQ and can be held in…
Like the Original , this Thing is designed to house Nikon lenses on C-mount cameras, e.g. the Raspberry Pi HQ camera. This remix increases the field of view and the minimum focusing distance in comparison to the original design. I still…
This is a very simple case for the Raspberry Pi HQ Camera. It's useful for covering the bare PCB of the camera when you want to use it on a tripod (via its own mount) without being attached to the Pi or anything else. It is designed to be…
This is a wheel component created for the purpose of mounting on a mechanical keyboard. Inspired by the EVQWGD001, and fits in the size of 1U of key switches. You can see a detailed description, footprint, and sample PCB on the project…
I modeled up some of the warbosses wardrobe from the official mini picture and handed him one of my historic sword replicas. I especially enjoyed doing the frowny face axe. Love it. Many thanks to Carlbark for the original model and…
This is my first design, I hope you enjoy it, after what happened in Morocco, I have decided to make this design as a representation of the damage caused by an earthquake. About the design: - It is not only aesthetic, in the correct size…
This is a mix of several models related to the Articulating Raspberry Pi Camera Mount I made the following changes added a build plate that contains all parts for the configuration I tested z rotation comes first (close to the case), then…
As stated in the summary - I love the cases that are on here for the Heltec V3 but most of them look more like mobile units - I needed something that was more home module looking. So I came up with this. As well as the 3D printed parts…
Monopoly organizer tray/inlay except with Avengers logos and labeling - fun! Summary of features from my Monopoly model: The design is intended to be used during game play as well as packed up inside the box after play. Just take the tray…
This is part of my attempt to create 8mm(R/S) / 16mm film scanner, where the two pieces will be connected and attached to a Raspberry Pi HQ camera (C-mount) and then a Schneider Componon-S F2.8/50mm lens (M39 thread). Short design video…
Love Adafruit's Raspberry Pi HQ Camera Case ? Love the beautiful Pimoroni Hyperpixel 4.0 display? Now they can play together! This page contains the two models required to make the Hyperpixel 4.0 work with the Adafruit-designed case - a…
Bill of goods to build your own: Print each item with the material described (everything in PETG at 15% infill with 4 walls) with the exception of gaskets (TPU at 100% infill) and the Allsky-Dome-Seat.stl (PETG at 100% infill). Raspberry…
A simple case for the Raspberry Pi HQ camera. Rear side of case has a raspberry pi logo. I’d suggest printing with a <.15 layer height. It is based on the Pi mechanical drawings and the holes fit M2.5 screws. Make sure the front/back of…
I wasn’t aware the M12 variant existed… I thought there was only one model of HQ camera so I was a bit surprised when I unboxed it. I couldn’t find a way to mount it to my telescope so I put together this basic design. I used some…
🐀 Rat & Rodent Tunnel System — V2 Excited to release a new version of my tunnel system! This time, I used 80mm diameter tubes and a directional cube to allow expansion in all directions. Compatibility: If you liked V1, you will find an…
This system was designed to work with the Creality CR-6 SE printer, but should work with any printer or CNC that uses a 40mm x 40mm extruded aluminum frame (including Ender 3, Ender 3 Pro, CR-10 MAX) . The Raspberry Pi case for your…
I sculpted a new Witch Hunter proxy for games of Warhammer Quest 95. Enjoy. Category: Toys & Games
This is a reference model of Waveshare's 100X Industrial Microscope Lens for Raspberry Pi HQ Camera. It is based on my own manual measurements. I am hopeful that someone will find it useful for creating their project. DISCLAIMERS: The…
I made a few modifications to the nice Adafruit design: I thought the camera cable hanging out was an unsightly blemish on an otherwise nice design, so I made the back cover a bit bigger to accommodate it. You have to fold the cable, but…
A simple case for the Arducam UC-733 board. The Fusion 360 source file is included to make remixes easier. Hardware Required This was designed around some basic hardware from McMaster Carr but their mesaurements are pretty standard and…
Simple Assembly for RPi Camera HQ You just need: Support Camera + Protection Camera for mounting on your RPI HQ Camera One or more Arm Straight v4 (different lengths available) to structure the actual arm M5_knob_short_v4 (one for each…
I DESIDED TO MAKE SPARE SHELF HANGER FOR MY NISSAN J11 QASHQAI 2016 WHEN I LOST ORIGINAL PART
This is a simple Raspberry Pi 4b skeleton mounting for the HQ Cam. Easy access to all GPIO and interfaces of the Pi. Raspberry HQ Cam: https://www.raspberrypi.com/products/raspberry-pi-high-quality-camera/ Raspberry Pi 4b:…
Batman HQ with cape Category: 3D Printers
Preview: https://a360.co/3qDz0ZC Counterweight: SmallRig Counterweight (200g)
Microsquat Watermelon Prop Tool for 40mm HQ Prop Print Settings Printer Brand: Creality Printer: Ender 2 Rafts: No Supports: No Resolution: 0,1 Infill: 100% Filament: dasfilament.de PET-G Category: Tools
High Quality Quake 3 Logo Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 10% Category: Video Games
This is a case for the Raspberry Pi HQ Camera, and it includes a place to mount the Arducam CSI to HDMI Cable Extension Module . This model uses heat set inserts , and metric hex screws , for mounting the camera, hdmi module, and closing…
Enclosure for the Raspberry Pi zero with HQ camera. As I had issues getting the correct screws for the model by Lilifee , I remodeled the enclosure to fit M2.5 screws with either button or cylinder head. To setup the camera you can follow…
Can't find focus with your Raspberry Pi HQ Camera on your Celestron FirstScope (or similar)? Me neither, so I made this adapter that bolts to the camera instead of the stock C-mount and replaces the part in the FirstScope focus mechanism…
Wiper cap for Nissan Qashqai J10. NISSAN 28882-AU300 RENAULT 28 88 2AU 300 It's my remix from https://www.thingiverse.com/thing:1572193 with a width scaling of 102%.
Español: Por aquí les dejo la carcasa para la cámara de alta calidad de la Raspberry Pi. La diseñe para que trabaje con la carcasa flirc. Pueden ver el video de YouTube donde la diseñe en SolidWorks y Fusion 360 para hacer una leve…
Inspired by the Voron 2.4 enclosure I made my own for the Prusa i3 MK3S+. Exterior Dimensions are 614 x 556 x 518mm . The Case is sealed from all sides but air can still flow in from below to vent the electronics. The whole enclosure sits…
Started as Pan/tilt camera holder, this Dual Raspberry GS/HQ camera holder/mount (for Pi5) turned out to be good enough for tripod mount, without originally planned external holder. Use with two GS cameras (Global Shutter) is only…
This little project is a mix of 2 other projects that I've put together in order to make a Pi Webcam using the shortest Pi Zero Camera cable that I had in stock ! So far the camera seams not to overheat or anything even if I haven't…
Raspberry Pi HQ camera back cover as small as possible. Model is created as the minimal solution to protect parts at the back of camera PCB from accidental contact with conductive materials. The body footprint matches PCB outline and it…
This is an actively-cooled cinema-style camera housing for a Raspberry Pi 4B and a Raspberry Pi HQ Camera that features a 45* articulating LCD touch screen, mounting for external accessories, as well as space for a high-capacity battery.…
This allows you to mount your Raspberry Pi HQ camera on HeyVye's modular mounting system. There is a cover that goes on top of the camera PCB. The cover is thin and flexible enough that it can be fitted to the camera. This should be done…
Needed an replacement blind for my Nissan Qashqai switches, as i had drilled a hole in one of them for a custom button. You can off course buy new ones from the dealership, but those are quite expensive. So about 15 minutes later in…
This project was to create an automaton, which is a relatively self-operating machine. My partner, Damon Vunk, and I choose to recreate the earthquake scene from the apocalyptic movie 2012. We created an interactive scene that engages the…
The HQ Pepe Thinker had a bottom layer that wasn't printable since it had a lot of weird geometry. Fixed that. No other printability issues. Supports required. Mine was printed in PCCF just to confirm printability. Be careful when…
This model serves as a template to design further add ons for the Pi Camera HQ.
12m Lens mount with 8 mm diameter filter.
Import of https://www.thingiverse.com/thing:4540545 by mikelane76 . Simple print and case that works perfectly for the purpose. Had to take a little bit of the PCB off the side of the camera from where it would've been attached to an…
The M2.5 screws now screw directly into the mount/adapter. Be careful about how many times you attach and detach the camera from the mount/adapter. It's not designed for that. Attaching it once should suffice. After that, you risk…
Because you have enough pieces to pick up after an earthquake; your razor shouldn't be one of them. *I don't know if this thing is really earthquake resistant. I just made a click-baity name and gif to trick people into liking it. It…
Español Adaptador para usar lentes de microscopía de montura tipo RMS en la cámara de Raspberry Pi HQ que usa montura tipo C. También sirve para cámaras CCTV o Bolex que también usan montura C o CS. La primera vez que se monta el lente…
print in PETG, No supports required :) You will NEED to print in a semi flexible filament! the model WILL flex during assembly! I have not tried PLA, as I think PLA would snap during insertion of the Pi camera. You'll need: 8x m2.5 bots…
A two piece print housing a RPI Zero 2W and RPI HQ Cam with 3010 fan for cooling. Mount the camera to the camera mount without the lens attached otherwise it's a struggle. Mount the RPIZero with the back facing the camera. Step file…
Mount for Raspberry PI 4B and HQ Camera, with heatsink. This allows for the entire ensemble to be attached to a mount via the ¼" mount on the HQ Camera. Materials needed: 4 - M2x16mm hex head 4 - M2x10mm hex head 4 - M2 hex nut Heatsink…
a Raspberry HQ Camera mount for hamkers' Pi CAM arm system https://www.thingiverse.com/thing:2842300 Print Settings Printer: Prusa Mini+ Rafts: No Supports: No Resolution: 0.20mm Infill: 20% Filament: Prusament PLA Galaxy Black Notes:…
AllSky Camera on base PI Zero 2 W, PI HQ Camera and Acrylic Clear Cover Main features: Small PI Zero 2 W cpu board PI HQ Camera Ethernet port with passive PoE (12-24V) Walter and SQM sensor Dew Heater / Fan Wiring and PCB on EasyEDA…
Case for Raspberry Pi HQ Camera Case. Revised to be a little better looking and more sturdy on 11/2/23. There are two versions of the bottom plate, one is with slits for cooling. I guess that might be nice if you are looking for that.…
This is a raspberry pi HQ camera m43 adapter. The HQ camera circuit board screws on to the base (the 4 corner holes). You may need to take off the C/CS mount rings and other hardware for it to fit. Next, you screw on the lock ring all the…
This model combines two awesome models to mount and adjust the Raspberry Pi HQ Camera. After printing the ball head piece you need to print also the following parts from the linked originals: Raspberry Pi HQ Camera Mount for the…
This is a re-created version of KTM/Husqvarna "Marking Mandrel" Pt.# 78129032000 intended for timing the balancer shaft when re-installing the side case on a KTM 450/500 or Husqvarna 450/501. Here's a YouTube video explaining the process:…
A replica of the Mira HQ map form Among Us
Use 4 M2.5 screws and nuts You can download the arms and knobs here : https://www.thingiverse.com/thing:3689842
FlashQ Trigger is the World's Smallest Wireless Flash Trigger/Receiver. Only issue I have found, most the cold shoe mounts / stands are too large for the FlashQ receiver mounting plate (Its thin and doesn't have a retaining screw). I…
IKEA Ivar shelves are supremely versatile and robust shelves, suitable for pretty much all circumstances: be it a student room or a kitchen - and usually, a decade or so in, they tend to still be useful in the basement or the garage.…
For those who have a raspberry pi sittting around and looking for a remote access camera. For those who want a ridiculously large print observation camera. Or, more likely, for those who have a PoE switch (or want one) and need more…
Raspberry Camera HQ Arm mount
Snap On Back Cover for the Raspberry Pi HQ Camera Module How I Designed This I used the mechanical drawings supplied by Raspberry Pi to generate the model in Shapr3d. Category: Electronics
A mount for the Raspberry Pi HQ Camera to sit inside the top of the frame looking down at the build plate. When combined with the 6mm wide angle lens, provides clear shots of the whole bed during a print. Bill of Materials 3 Printed Parts…
HQ Camera case that can be attached directly to telescope focuser via M42x0.75 therad. It was modeled using Fusion360. I have also added XML file with custom thread that actualy prints as it should without any scaling needed. Just rename…
Habe die Halterung zugeschnitten und als .stl exportiert um anderen die Arbeit zu erleichtern und Zeit zu sparen
Our used car lacked a cover for the hole where the ignition key usually goes, but since we have keyless it was just a gaping hole. A few minuttes in Fusion and I had a click in place plate that covers the hole. Printed in PETG on a…
Mocowanie szyby nissan quasqai
I have made a small fast print to show u the result on photo :)
![#0028 [Remix] Monopoly Organizer Tray/Inlay - Avengers Edition "Shield HQ"](https://media.printables.com/media/prints/224949/images/2054328_8fda0b71-207e-4b25-81fc-e272366b050b/avengers-monopoly-1.jpg)
