Raspberry pi4 HQ camera (aluminium mix)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mix enclosure for raspberry pi4 with HQ camera. The front part is PETG and aluminum at the back.
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 197
- Makes
- 6
- Views
- 2,231
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
A mix of a raspberry pi aluminum case with a RPI HQ camera enclosure.
I wanted to re-use the back part of the aluminum case for a better cooling effect and added the HQ camera on the front.
During the development of my web application for the RPI zero, I needed more performance to try different libraries.
https://github.com/Lillifee/raspiCam
https://www.prusaprinters.org/prints/48519-raspberry-pi-zero-webcam-hq-camera
I'm still searching for a short black camera cable for the raspberry. Only found long flat cables until yet. Leave me a comment if you have a tipp where i could find one.
PS: Attach the camera cable before assemble! :D
Parts:
I'm sure you will find another back part if you don't have or want to buy the aluminium case.
Aluminum case:
or
Screws:
- Camera: 4x M2x8
- Raspberry: Re-used from the aluminum case.
Filament:
- Front: Prusament PETG JetBlack
- Bottom: Prusament PETG Pistachio Green
I used the infill trick for the top part with a 30% honeycomb infill.
As usual, you will find the blender files to adjust it to your needs.