Counting matching models…
My sister asked me to print these corners for her. I looked around and found a model on Thingiverse. That was great, but I had some trouble printing them, so I took that model and made several changes to print it reliably without support.
This support is designed for the edgeless aluminium LED profile. These profiles were only shipped with 2 supports per piece, so they wouldn't be enough if I had to cut them (the profiles). Not finding them available to buy separately, I…
Designed for 30x30 and 30x60 “Bosch”-style aluminum extrusions, this tool enables the drilling of D11 holes 18mm from the end of the extrusion, while vacuuming up the aluminum shavings at the same time (for standard 30 mm vacuum…
Hi everyone! 😊 Due to popular demand, I decided to design my own enclosure for the Bigtreetech TFT 35 V3.0 display. This box supports the standard display emulation included with the printer and can switch to touch screen mode. I’ll be…
This is the 45x12 mm version of the Cable Duct for 4545 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models different sized versions.
This is the 45x23 mm version of the Cable Duct for 4545 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models different sized versions.
This is the 45x45 mm version of the Cable Duct for 4545 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models different sized versions.
Durable and easy-to-print sliders designed to fit 30 x 30 mm aluminum extrusions. Perfect for smooth, adjustable movement in DIY projects or custom setups. Print with supports, ensuring a quick and hassle-free build for makers of all…
This is designed to be used with heated inserts, the size I used is 1/4“-20x12.7. But any ¼ inch insert should work, as long as it's not longer. The ones I used: https://www.amazon.de/dp/B09MTS6ZZQ It's a very simple and convenient way to…
A simple spool holder made to be attached to a 3030 alumium extrusion. Which is the type of extrusion i've use for my prusa mini+ enclosure. Design is made in 2 pieces, the spool holder and a stopper that screw in the holder once the…
Needed a foot to raise my aluminum extrusion off of the floor so I designed and printed a small foot. Connect to aluminum extrusion using a single M5 bolt screwed into a t-nut. My print parameters: Printed in PETG 0.2mm layer height 15%…
A clamp to hold the 16mm thick sheets like MDF sheets in place on the aluminum profiles with 8mm slot width.
This is a simple enclosure to hold an RF choke or balun based upon a Fair-Rite FT114-43 or FT114-61 toroid. There is provision for a standard 4 hole BNC connector at one end with a flying lead at the other. The lid can be glued on once…
This is an adapter for a Desktop Vacuum to clean your Printer's aluminum cross bars (or X bars). It has a guide to keep the vacuum aligned with the bars so you don't have to focus on keeping it straight! Works well in most places for my…
I designed this part while building the SICCO Filament Heater/Dryer DIY Project for my Prusa XL 5 Head printer. The project calls for 30x30 aluminum extrusions (black) and requires 3 way corner cubes, which are usually silver, and need to…
2020 Connector 3 Way Corner Bracket EXTRASTRONG _Alu Profile Suitable for: Resize to adjust dimensions Warning: Dimensional Tolerance Notice Please be advised that final print dimensions can vary due to printer settings, calibration, and…
Video Series Link: This is my entire Daedalus Upgrade project that I've been working on for the past 4-5 months. I've uploaded all of my files here for you to embark on this journey if you'd like or take parts of my build and make it into…
For the MOPEKA PRO sensor used with the non magnetic ALUGAS bottle with 300mm diameter. No need to remove bottle if you need to change the battery in the sensor. The stand has a height of 5 cm for easy access to the sensor by hand under…
GoPro Mount / Webcam mount for 3030 Alu Profile / 3d Printer - Staffa montaggio per profilo 3030 / Stampante 3D Suitable for: https://www.printables.com/model/1171796-gopro-mount-extension-estensione-per-gopro…
Wall decoration design found throughout Andalusia, Spain.
Self explanatory, really. Pick the sigil you like best and print it in your favorite color material. These are designed to be a slip fit with a standard 12oz aluminium can, so keep material shrinkage factors in mind. If you're not sure,…
she is made from a AI program for 3D Printing called Rodin https://3d.app/r/JTC2NGZW
Paralume a Elica in N.3 Modelli: 150x100x28 - 200x150x28 - 250x170x32 Per creare da una Bottiglia delle Lampade o Abatjour con il suo cavo con interruttore e spina. https://amzn.eu/d/ffhHWTn PS.: Prototipo in fase di sviluppo e test !…
Slip these jigs onto the 3mm stainless steel wire and slide it into the holes where the wire enters the wooden balustrade upright then paint the upright without getting paint on the wire. Printed with minimal infill in PLA (using the…
Designed for my own printer, I needed a low-profile umbilical mount since the rear fan duct may overlap the rear profile during movement. the holes are M5 screw holes to be used with M5 T-nuts, i use two M5x14mm screws the hole for the…
I designed a scout woggle (arganel, slide, neckerchief ring, scarf ring) that features the scout symbols as its main design. This woggle represents the values of scouting—brotherhood, respect, and preparedness—while serving as a…
No supports and No glue - post fits snug in base. Disclaimer: Fish not guaranteed to understand the game... but you can patiently watch for the thrilling moment they might score some points! :) A few different options available: Ring…
3D printed cover for dismounted Kathrein Shapeg HDM 135/140: The outer part can be mounted using the original screws, as it matches the original Kathrein Shapeg mounting pattern (according to their technical drawing). You will need…
2020 Extruded Aluminum - Profiles Collection - Parametrico/Parametric - Adjust the Z scale to obtain longer profiles Available in 5 variants: 2020 4 Sides Open 2020 1 Sides Open 2020 2 Sides Open (90°) 2020 2 Sides Open (180°) 2020 3…
I tested a bunch of cable clips and the model I found at https://www.thingiverse.com/thing:2613532 was my favorite. It requires some force (pliers help) to twist into place, but once there it holds firm. It's got a flexible arm so cables…
4040 Rv2 Series V-slot T-slot Extruded Aluminum - Profiles Collection - Adjust the Z scale to obtain longer profiles Available in 5 variants: 4040 4 Sides Open 4040 1 Sides Open 4040 2 Sides Open (90°) 4040 2 Sides Open (180°) 4040 3…
Adapter für CASALUX LED Lampe Durch die von mir entworfene Desk Mount Halterung für meinen Monitor: https://www.printables.com/model/1289740-zubehor-monitor-halter-deskmount-extension , ist eine Klammer am Deskmount frei geworden dies bot…
End cap designed to fit 2020 B-type aluminium profile / extrusion with 6mm slot and 5.5 mm center hole. Added thickness is 1mm., the inside fingers are 5mm, It's a bit fiddly to put on but then it should sit pretty well. If you get a…
Here is my aluminum can model. It's the 12 oz type that would contain soda or beer. I was going to make it to use with the can holder contest, but I was too busy to come up with a design in time. I made a version without the punt for…
20240 Aluminium extrusion profile, CNC waste board, base plate, fixture plate, machine bed, mounting plate, T-slot table 100mm in length. Overall dimensions: 240x100x20 Every coffee genuinely inspires me to create more. If you like what…
while i tinkered with aluminum extrusions a bunch of times, recently i went through with three individual projects using them. in the process i kind of created a framework / library by accident. this happened i think because all three of…
For checking fitment before buying the machined version
Print with .3mm layer height, TPU filament, 5 top shell layers, 25% infill. Reuse the metal washers from the original pads.
A single toroid choke/balun casing for an antenna Print with PETG/ASA 0.3 layer height 4 perimeters, 4 tops + 4 bottom, 25% infil. 4 brass insert for M3 bolts goes into the corners. Use standart PL-259 connector with 4 bolts, M5 stainless…
I was missing a "limiter" 4 the angle stop of my Festool tks 80 EBS. It is quite annoying to do repeatable cuts without it. New versions online. Check em out yourself :P In addition to the printed parts you will need M5 x 20 (25?) Screw +…
Note: I made an updated version of this pod that uses zip ties to secure it. There is much less play in it, I recommend using that new model: ____________________________________________________________________________________ This is a…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com. You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Basic Mount for 3030 Extrusion to a flat surface, such as a desk. You can either use screws or a BESSEY Die Cast Screw Clamp LM 150mm to mount it to your desk. The 3030 extrusion can be fixed to the base with T-Slot Nuts with M6x12 screws…
This foot was printed in PETG and with a TPU pad to act as anty slipery. It can be printed just the PETG / PLA part only, but if you have TPU it works very well. The pad was glued with contact glue.
A compact cable clip for fixing cables inside 1515 extrusions. The OpenScad is completely parametrizable, so it can be adjusted to fit 2020 or other extrusions as well. Suggested print settings Rafts: No Supports: No Resolution: 0.2mm…
A minimalist WC door hanger , inspired by the iconic single-line aesthetic of the 1970s cartoon La Linea . Its clean, playful silhouette and clear toilet symbol make it an excellent fit for homes, hotels, offices, gyms, and wellness…
I have this Sim Racing rig and I absolutely love it. But as everyone with a Sim Racing setup knows, these things are never really finished. So here’s the next step: a solution to cover the exposed nuts and slots. I had quite a hard time…
Case to hold and protect a corne keyboard from typeractive.xyz with the Aluminum Case . By default this is a tight fit. You can just scale it up by a minimal amount to make easier to slide in and out. Then I recommend to put a rubber band…
This part connects the back support of the Armin Wirth Aluflex to the frame. Print on its side, at 0.15mm with supports.
Had these plates already on some of my doors. But because i have an old house and did not change the doorlocks they did not sell them anymore for my size of doorholes. I could get the bigger ones and make the extra hole myself but i…
Gridfinity Version created in collaboration with @Rex_Spirit_2423197
This is, by far, the stupidest idea I had in years (other than randomly writing a microbiology research paper, for which I actually learnt microbiology...). This is a 1 to 1 accurate topographic copy of a real existing city Alushta, which…
2020 aluminum extrusion profiles are, 20mm x 20mm square T-slot. Commonly made from 6063 aluminum, for DIY projects like 3D printers, CNC machines, workbenches, and automation equipment
This model is a compact collector designed to store aluminum can pull tabs , helping support recycling initiatives that convert tabs into wheelchairs for people in need . The design is simple, durable, and easy to print, making it ideal…
This enclosure was designed to hold a toroidal balun or transformer for matching to a transmitting antenna. It was designed around the 61mm cores. There are two versions - one with SO-239 connectors on each end, and one with an SO-239 and…
**Updated model again - I updated the model so the mount is shorter (less swing weight), main change is I inverted the dove tail. * Updated mode l - The file title with "update" has a small change where I rounded off the leading edge of…
Tischecke fuer Adventuridge Alu Campingtisch Da die original Ecken gerne brechen, habe ich fuer einen Freund diese Teile nachgebaut. Gedruckt mit ABS+ Füllgrad - wie Ihr wollt. Ich habe 100% genommen, damit die Ecken bei seinem ständigen…
I designed these PrimaLuna ProLogue Premium EL-34 Remote Bumpers because original ones disintegrated. Printing Notes Print “by object” to get the best effect Black TPU reminds original orings, you can go with any color you like No…
CAD features + Footprint: Cutouts on the front and back for fingers, to make it easier to grab the gloves Small spring effect keeps gloves nicely in place Tiny edge blends to compensate for elephant's foot Designed to print in the strong…
Wall Mount for Skateboards V2 is an updated version of the original Wall Mount for Skateboards with WLED Aluminum Profile (V1). This version adds support for two LED aluminum profiles , allowing more even and stronger illumination of the…
Um ein 2020 Aluminiumprofil senkrecht aufzustellen, habe ich diesen Halter / Ständer generiert. Auf diesen wird das Aluminiumprofil aufgesteckt. Mit dem Programm openSCAD kann man die Maße recht einfach anpassen (die .scad Datei laden,…
Simple endcap for the Kovalex aluminium profiles for WPC terrace floor. Printed with PETG @ 0,2mm layer hight with 20% infill.
This is a simple enclosure for a ferrite rod 4:1 balun, made of a plastic 32mm diameter tube and two caps at the ends. One side is capped with a simple speaker wire terminal for the antenna wire (M4 threaded), on the other side there is…
For the Part#1, you need to have a large plate. I have printed them with my CR10 V2. Assembly part: Part#1_Socle (257mm diam) Part#2_Yarn (Black color). I have used Matte PLA Part#3_Yarn (Yellow Color) Part#4_Complete Armour (Silver and…
With the Smart Relay Holder , you can install smart relays such as the Salsus SR600 , DI600 , or Shelly modules neatly and securely inside a Hager meter cabinet . The holder ensures an organized and stable placement of the relays and…
A tool for accurately drilling holes for blind joints into 2020 / 4020 / 4040 extrusions. BOM: 1 - 4 x F695-2rs bearings (the same that are used on Voron V2 and VT machines) 4.5mm drill bit (A 5mm drill bit "works" as well but inserting a…
Print on its side. Use recommended supports for your printer. I recommend four walls for extra rigidity. Spring Loaded M8 T-Nuts ( Amazon Affiliate link ) M8 Button Head Screws ( Amazon Affiliate link )
Welcome to my quick aluminium ducting mount. Its a two part design and easy to print (yes use tree supports for this, its not a lot). You have the wall mount adapter and the ducting hose holder itself. Use a screw or similar to attach the…
corner for 20mm aluminium profile to be used used with M5*10mm CHC screws model is intended to be printed at a 45° angle (as in slicer screenshot) in improve strength overall
flat connector for 40mm aluminum profile 4xM5*10 CHC screws
For a while I've been looking for a spice rack that I don't hate, specifically something with these features: Mounts on a vertical surface to save space in the kitchen Uses a container that is commonly available and not super-expensive…
Flashback to MakerBot 2X and Carl Raffle's upgrades. This is an extruder upgrade to match with Carl's Alu-Dual Block. Between Carl's block and rmcniff's extruder I was able to print PLA on my 2X for the first time ever. Instructions Print…
Visual support for students for place value. One includes decimals the other is without decimals. Quick print. No supports needed.
My (żaluzje) blinds holder (one of 2) broke so I recreate the working one on tinkercad. 2 photos of my print, 2 photos of the working holder and a single photo of broken one. Model is recreating "V10" 19x25mm horizontal blinds Space…
Není to nosná část slouží pouze k podržení nízké M8 matičky na svém místě.
The holder can be printed without supports if it is printed on its side. Because it is made of TPU, it adapts to the slightly different dimensions of profiles from various manufacturers. (The cable tie is also 3D printed — search for…
CZ Profil 3030 má širokou drážku a samotná matice M6 jí může projít, takže spoj není dostatečně opřený a může se vymačkávat. Proto používám nízkou matici M8 jako opěrnou „podložku“: v drážce dobře sedí, zvětší dosedací plochu a zajistí…
Rámy a výplně oken páleny laserem. Objímky pro osvětlení 5mm LED diodou.
Eine Wandhalterung um die Casalux RGB LED Lichtsäule von Aldi an die wand zu schrauben.
Když kamarád pořídil kola z VW na Škodovku a potřeboval středové krytky ŠKODA ale v rozměru 65mm, který dělá VW.
Simple, with all the work done by @sulli18 and all I've done is create a joiner using the 16mm end caps. It wouldn't take much to create a 10mm version, should it be needed. When printed, make sure all supports created are removed, so…
I seemed to have a unique situation already with my railcore setup somehow. I could never find a model for a fan shroud that fit the mounting hole spacing so it required modification or just brute force to fit properly. When I upgraded to…
Fiat 126p Maluch Cookie Cutter Didn't find what would interest you? Let's create your dream project together. Write to this email : ----> [email protected] <----
This is my second model with the LaLinea Balum heart motif :) It's much thicker than the previous one, but wider. Dimensions ~ 235x120
This custom-designed adapter allows you to install an Epman shift knob on your Toyota Avensis T25 quickly and securely.
das sind einfache Deckel für 15mm Aluminium Vierkant. Diese habe ich als Stützstreben bei meinem Artillery Sidewinder X1
Koncovka Alu lišty HAKR nosiče kol Speed Alu Profi 0902 a Cyklo Pro Alu 0901 a pod. Doporučuji PETG nebo ASA. The end of the Alu rail of the HAKR bike carrier Speed Alu Profi 0902 and Cyklo Pro Alu 0901 etc. I recommend PETG or ASA.
I wanted to build a bondage stockade that was secure, easy to store, and compatible with an open-source sex machine. So, I started looking at what was on the market. It didn't take long to realize the options were either a total ripoff or…
Nice mount for attaching your Logitech RS H shifter to 4080 aluminum extrusion.
I used OpenAI Codex to build a mounting plate in SCAD for a Wehooper4 SolarXiao and 2x2 4P 1S 21700 battery pack that fits in a 7.4" x 4.7" LeMotech Aluminum Junction Box. The mounting holes for the SolarXiao board were taken from an…
Aluminum extrusion wall bracket to organise aluminium extrusion (multiples of 20mm)
Added some screw tabs to mount the power strips with added holders. No need to have room to slide it over the holder after mounting. Print on the side without supports. 20% infill should be good, 2 perimeters is suffuicient.
The calculator case should print standing up as it would hang on your belt, the clip laying down. at least 4 walls for strength and 30% infill. I recomend PETG. get some 2.5mm rod from amazon, might have to drill it out or glue it into…
I created this spacer to align my Regalux shelves. Spacer can be placed on top of each shelf, between them, to allow a regular alignmenmt. I printed in PETG, with supports.
