1 / 3
V Slot 2040 Aluminium Extrusion Joiner ( 16mm )
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This allows pieces of the V Slot 2040 aluminium extrusion, to be used together
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 81
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple, with all the work done by @sulli18 and all I've done is create a joiner using the 16mm end caps. It wouldn't take much to create a 10mm version, should it be needed.
When printed, make sure all supports created are removed, so that the extrusion can push all the way up. A slight tap with a small hammer may be needed, but it won't damage the joiner or the extrusion.
