1 / 3
V Slot 2040 Aluminium Extrusion Joiner ( 16mm ) — zdjęcie 1
1 / 3

V Slot 2040 Aluminium Extrusion Joiner ( 16mm )

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This allows pieces of the V Slot 2040 aluminium extrusion, to be used together

Ocena
0 / 5
Polubienia
2
Pobrania
14
Wydruki
0
Wyświetlenia
75
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Simple, with all the work done by @sulli18 and all I've done is create a joiner using the 16mm end caps. It wouldn't take much to create a 10mm version, should it be needed.

When printed, make sure all supports created are removed, so that the extrusion can push all the way up. A slight tap with a small hammer may be needed, but it won't damage the joiner or the extrusion.