Raspberry pi4 HQ camera (aluminium mix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mix enclosure for raspberry pi4 with HQ camera. The front part is PETG and aluminum at the back.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 197
- Wydruki
- 6
- Wyświetlenia
- 2231
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
A mix of a raspberry pi aluminum case with a RPI HQ camera enclosure.
I wanted to re-use the back part of the aluminum case for a better cooling effect and added the HQ camera on the front.
During the development of my web application for the RPI zero, I needed more performance to try different libraries.
https://github.com/Lillifee/raspiCam
https://www.prusaprinters.org/prints/48519-raspberry-pi-zero-webcam-hq-camera
I'm still searching for a short black camera cable for the raspberry. Only found long flat cables until yet. Leave me a comment if you have a tipp where i could find one.
PS: Attach the camera cable before assemble! :D
Parts:
I'm sure you will find another back part if you don't have or want to buy the aluminium case.
Aluminum case:
or
Screws:
- Camera: 4x M2x8
- Raspberry: Re-used from the aluminum case.
Filament:
- Front: Prusament PETG JetBlack
- Bottom: Prusament PETG Pistachio Green
I used the infill trick for the top part with a 30% honeycomb infill.
As usual, you will find the blender files to adjust it to your needs.