Prusa i3 MK3S+ Enclosure with Rapsberry Pi, HQ Camera and Filament Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inspired by the Voron 2.4 enclosure I made my own for the Prusa i3 MK3S+.
- Rating
- 5 / 5
- Likes
- 72
- Downloads
- 85
- Makes
- 2
- Views
- 3,010
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Inspired by the Voron 2.4 enclosure I made my own for the Prusa i3 MK3S+.
Exterior Dimensions are 614 x 556 x 518mm.
The Case is sealed from all sides but air can still flow in from below to vent the electronics. The whole enclosure sits on rubber feet (from High-End Audio Speaker). Additionally a Raspberry Pi 4 enclosure can be mounted inside and the HQ Camera attached to the aluminum extrusion.
Printed Parts required:
- 16x Corner Piece
- 4x Hinges
- 2x Left Latch
- 2x Right Latch
- 2x Latch Base
- 6x LED Strip Angles
- 4x Rubber Feet Mounts
Sourced Parts required:
- 8x Aluminium Extrusion 2020 - 500mm
- 4x Aluminium Extrusion 2020 - 560mm
- 44x Flat Head Screws M5x8
- 8x Nuts M5
- 8x Washer M5
- 36x T-Slot Nuts M5
- 6x Hex Screws M3x6
- 6x T-Slot Nuts M3
- 4x Round Magnets 7-8x1mm
- 2x Acryl Panel - 573 x 473 x 3mm
- 1x Acryl Panel - 573 x 513 x 3mm
- 1x Acryl Panel - 513 x 473 x 3mm
- 2x Acryl Panel - 472 x 255.5 x 3mm
Compatible with following extensions:
- Filament Dry Box IKEA Samla 22L (https://www.printables.com/model/116955-filament-dry-box-ikea-samla-22l)
- Raspberry Pi HQ Camera Case for T/V-Slot (2020) (https://www.printables.com/model/82579-raspberry-pi-hq-camera-case-for-tv-slot-2020)
_______
If you like my uploads buy me a coffee -> https://bit.ly/pwave-donate