Raspberry Pi HQ Camera Case, Hyperpixel Style
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.48 – €4.25 net (excluding VAT)
For file: Hyperpixel Case_0.1mm_PETG_MINI_4h56m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.86 excluding VAT (range midpoint).
- Weight reported by the author
- 28 g
- Print time reported by the author
- 4.93 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A remix of Adafruit's modular Pi HQ Camera case to fit a Pimoroni Hyperpixel 4.0 display.
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 123
- Makes
- 1
- Views
- 2,079
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
Love Adafruit's Raspberry Pi HQ Camera Case? Love the beautiful Pimoroni Hyperpixel 4.0 display? Now they can play together!
This page contains the two models required to make the Hyperpixel 4.0 work with the Adafruit-designed case - a “case” and a “cover”. The rest of the components are available at the original page.
https://www.printables.com/model/32718-raspberry-pi-hq-camera-case
Printing Notes
There are some fine features on the cover plate that print a bit better at a 0.10 layer height, so that's what I used for my final test prints. Larger layer heights should work just fine though.
I also tweaked the slicer settings to increase perimters so that no infill was used, which makes translucent PETG prints look a bit nicer in some cases. Neither of these should be required to actually make use of the models though.