iPhone 16 Pro to 33mm Microscope
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Specifically made to fit Sunstone Orion 150S Microscope and fit iPhone 16 Pro
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 30
- Makes
- 0
- Views
- 246
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
Specifically designed to fit Sunstone Orion Pulse Arc Welder microscope. Use main camera only, 2x zoom to limit vignette. Phone should fit very snug with minimal play, use 2-3 piece of electrical tape on the inside top edge tighten phone in if needed.
Printing Recommendations:
PLA
Print phone case portion vertically upside down 0.4mm nozzle, 0.2mm layer height, 20% infill for the smoothest finish. Use organic supports on overhangs.
Attachment collar doesn't really matter, use a brim if needed. Glue into the case with sturdy glue, E6000 works great.