Adjustable Stand for INSKAM USB Microscope (12 mm Rod)

This is a custom adjustable stand designed for INSKAM USB microscopes commonly available on AliExpress.
The stand provides much better stability and height adjustment compared to the original tripod, making it suitable for electronics work, PCB inspection, soldering, and small mechanical parts.

The design is simple, robust, and easy to print. It uses a standard 12 mm diameter metal rod (e.g. aluminum or steel), which makes it easy to source and replace. The microscope holder can be smoothly adjusted vertically and locked in place with a screw.

Features

• Compatible with INSKAM USB microscopes

• Uses a 12 mm outer diameter rod

• Height-adjustable microscope holder

• Stable base for precise work

• Simple construction, easy to print and assemble

• Designed for DIY and workshop use

Required Hardware

• 12 mm outer diameter rod (aluminum or steel)

  • Length depending on your needs (e.g. 200–300 mm)

• M4 screw

• M4 nut or M4 heat-set insert (recommended for durability)

Printing Notes

• Recommended material: PLA, PETG or ABS

• Layer height: 0.2 mm

• Infill: 20–30%

• Print orientation as provided for best strength

• If using a heat-set insert, install it after printing with a soldering iron

Assembly

1. Insert the 12 mm rod into the base.

2. Slide the microscope holder onto the rod.

3. Install the M4 nut or heat-set insert into the holder.

4. Secure the holder with the M4 screw.

5. Mount the microscope and adjust the height as needed.