Shim for Vevor JH-1B multidirectional microscope
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable offset shim for the Vevor JH-1B multidirectional microscope, designed to shift the microscope position for a m
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This part is an offset / spacer shim designed for the Vevor JH-1B multidirectional microscope.
Its purpose is to slightly shift (de-center) the microscope position, making it easier to fit into your workspace and improving comfort depending on your bench layout (clearance, access, alignment with the working area, etc.).
It helps achieve a more practical microscope position while keeping the mount stable and solid.
⚠ Important: since this shim adds thickness, you must replace the original screws with M5x60 screws.
Recommended print settings
For best rigidity and to avoid flex:
Material: PETG
Layer height: 0.2 mm
Walls: 4 perimeters
Infill: high, ideally > 30% (more if needed)
Notes
This part is designed to be strong and functional, not cosmetic.
If you still notice any movement, increase infill or use 5 perimeters.