Logitech Bearing Housing for G25/G27/G29
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replace your broken bearing housing with a 3d print
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 604
- Wydruki
- 3
- Wyświetlenia
- 4154
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
The internal bearing housing on my G27 broke, all the bosses that hold it to to the metal motor plate had snapped, so designed a replacement based off the original Logitech part.
Due to the design of the part, its uses a lot of supports, I've been printing with the cone side down, as its harder to get the supports out from inside the part, but looking as modding the design soon to be able to print with less supports.
V1: Closely matches Logitech part, needs 8 m3 inserts to hold it against the plate
V1.5 : Added extra supports on the internal side, reduced the Boss hole size to fit the screws that came with the wheel