Logitech G25 G27 G920 Shifter Handle Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple Logitech Shifter handle adapter. The idea here was to let me fit a common thread shifter knob from…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 1513
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a simple Logitech Shifter handle adapter. The idea here was to let me fit a common thread shifter knob from ebay nicely onto the G25 shifter I have.
For the demonstration, I used a BMX foot peg as a handle ($10 for 2 pegs... bargain). It feels great and I'm happy with the fit.
The thread for the BMX Peg was a Imperial 3/8th UNF bolt... In the pictures I initially did a 10mm bolt but obviously I had guessed the thread size wrong as I'd printed it before getting a knob/handle to test on it.
So this file is a 3/8th UNF bolt. If you need a different thread size, let me know and I'll update a version for it. As far as I understand however the standard is 3/8th for a shift knob. Let me know if its not in the comments...
Check out more of my work in oznzsimracing.com forums
and more of my electronics stuff... here.
http://oznzsimracing.com/forums/m/16887284/viewthread/23526371-ramjetx-simrig-other-stuff
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 V2
No
Supports:
No
0.2mm worked fine
Infill:
10% - 20%
Notes:
Depending on the shaft length, you might want to make it more solid with wall thickness and infill.
The higher it prints, the more weight sits on the spring return in the shifter and it feels a little softer on return to center strength. No big deal.
If your using it as a sequential or handbrake lever. You can now put a lengthened shifter handle on it and make it feel more authentic.
Category: Hobby