Case for Waveshare ESP32-S3 Ethernet Board with POE and DHT22
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom case for the Waveshare ESP32-S3 Ethernet board with cable-connected DHT22 sensor
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 194
- Wydruki
- 0
- Wyświetlenia
- 1315
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This enclosure is designed for the Waveshare ESP32-S3 Ethernet Development Board with PoE, used in combination with a DHT22 temperature and humidity sensor connected via cable.
It includes dedicated cutouts for:
The RJ45 Ethernet port
A cable-mounted DHT22 sensor, intended for external placement
All other interfaces (USB, GPIO headers, buttons, etc.) remain enclosed, making this case suitable for headless or embedded applications where only Ethernet and a single sensor are required.
Note: Designed specifically for this board and sensor setup. Modifications may be needed for alternative components or wiring.