1 / 4
Rear Offroad Bumber with Trailer Hitch for 3DSets Landy
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Do you have Landy with off-road bumper and do you also want to tow the 3DSets trailer? Here is the solution :-)
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 232
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (17)Powiązane
I wanted to have off-road rear bumper on my Landy Wagon but I also wanted to tow the trailer. So here is the result I mixed original hitch and original rear bumper. Original hitch is slightly higher to by aligned with the tubes on the bumper. Because of this, longer bolts are needed. M3x12 is OK.
There are two options of the hitch - with and without that dotted structure.
And I also made version where hitch and bumper are in one piece.