1/10 RC car Tire + wheel, 335/80 R20, Michelin XZL tread profile for OFF-ROAD VEHICLES
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a scale tire for off road vehicles such as Unimog. It has a Hex 12 mm mount for 12mm hubs and a M4 screw hole
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 402
- Wydruki
- 3
- Wyświetlenia
- 2135
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this because I wanted a more realistic tire model for my RC car designs. So here goes!
The tire prints without supports and without infill when put on the side. With TPU it should take ca 10 hours per tire (0.3 Draft) .
The rim comes in two parts that are assembled with 3 M3 screws screwed directly into the plastic. ca 1 hour per wheel (PLA 0.3 draft)
Dimensions:
tire = 104 mm x 33.5 mm (1/10 scale for a 335/80 R20 tire)
Rim = 50.8 mm x 30.5 mm
In my new RC Car design I will be using a scaled 275 / 60 R20 Tire (same tread)+ wheel as this is the dodge ram stock tire size (at least one of them !)