1 / 4
1/10 RC car Tire + wheel, 335/80 R20,  Michelin XZL tread profile for OFF-ROAD VEHICLES — image 1
1 / 4

1/10 RC car Tire + wheel, 335/80 R20, Michelin XZL tread profile for OFF-ROAD VEHICLES

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a scale tire for off road vehicles such as Unimog. It has a Hex 12 mm mount for 12mm hubs and a M4 screw hole

Rating
5 / 5
Likes
55
Downloads
402
Makes
3
Views
2,135
Reviews
1

Updated at source:

Model information

Category
Vehicles
License
Creative Commons — Attribution — Noncommercial

I designed this because I wanted a more realistic tire model for my RC car designs. So here goes!

The tire prints without supports and without infill when put on the side. With TPU it should take ca 10 hours per tire (0.3 Draft) .  

The rim comes in two parts that are assembled with 3 M3 screws screwed directly into the plastic. ca 1 hour per wheel (PLA 0.3 draft)

Dimensions: 

tire = 104 mm x  33.5 mm (1/10 scale for a 335/80 R20 tire)

Rim = 50.8 mm x 30.5 mm

In my new RC Car design I will be using a scaled 275 / 60 R20 Tire (same tread)+ wheel  as this is  the dodge ram  stock tire size (at least one of them !)

Tags