Garden Hose to PET Bottle Connector (fusion360)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A connector to be able to connect a garden hose to a PET bottle to make custom DIY outputs.
- Rating
- 5 / 5
- Likes
- 60
- Downloads
- 258
- Makes
- 1
- Views
- 1,073
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Certain tasks may require special hose heads and this model aims to ease the creation process in case you don't simply want to buy a new one for, for example, only one usecase. This connector is made to allow you to make your own DIY garden hose head from a regular PET bottle. Sprinklers, new head types, water management systems, … are some examples of what you could use this connector for.
Printing information:
- Print the model on its tip
- No supports are needed
- Use a brim to increase adhesion to the printbed
- As the model will be in contact with water, I recommend using non porous materials like PETG or ASA to print it
Teflon tape on the PET threads can help with their waterproofness. You can use a regular o-ring on the tip as well.
Check out the base models for more information.
Note that, as mentioned by its author, this model resembles (by mischance) a lot a previously existing model. Check it out here for an alternative: https://www.printables.com/model/153957-garden-hose-gardena-to-pet-bottle-adapter.