1 / 2
Garden Hose to PET Bottle Connector (fusion360) — zdjęcie 1
1 / 2

Garden Hose to PET Bottle Connector (fusion360)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A connector to be able to connect a garden hose to a PET bottle to make custom DIY outputs.

Ocena
5 / 5
Polubienia
60
Pobrania
257
Wydruki
1
Wyświetlenia
1068
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Certain tasks may require special hose heads and this model aims to ease the creation process in case you don't simply want to buy a new one for, for example, only one usecase. This connector is made to allow you to make your own DIY garden hose head from a regular PET bottle. Sprinklers, new head types, water management systems, … are some examples of what you could use this connector for.

 

Printing information:

  • Print the model on its tip
  • No supports are needed
  • Use a brim to increase adhesion to the printbed
  • As the model will be in contact with water, I recommend using non porous materials like PETG or ASA to print it

 

Teflon tape on the PET threads can help with their waterproofness. You can use a regular o-ring on the tip as well.

 

Check out the base models for more information.

 

Note that, as mentioned by its author, this model resembles (by mischance) a lot a previously existing model. Check it out here for an alternative: https://www.printables.com/model/153957-garden-hose-gardena-to-pet-bottle-adapter.

Tagi