1 / 2
Generic Parametric box with friction fit lid. Highly adjustable in Fusion360
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a generic box that allows detailed scaling and modification by changing parameters in Fusion360.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 185
- Makes
- 1
- Views
- 839
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model has a number of parameters to customize. These are:
| LidHeight | The ratio body-2-lid vertical seperation |
| InsideWidth / Height / Length | As saved, the inside is variable and the outside = (inside + walls). If you want the outside to be your measured constraint, you can change this in the parameters and make the inside dimensions = (outside - walls) |
| OutsideWidth / Height / Length | |
| WallThickness | Defines outside dimensions of the box in combination with inside diameter. If your constraint is the outside size of the box instead of the inside, th |
| LipHeight | The Height of the lip extruding from the bottom into the lid. Higher means stronger friction |
| LipThickness | How strong the lip is. Too strong would make the lid counterpart too thin, too thin would make the lip prone to breaking. |
| CornerRadius | The corners are rounded. This defines the radius. |
| InsideCornerRadius | The vertical inside corners can be rounded. A minimal rounding makes the lip easier to print and more stable while keeping the walls thin. |
Current dimensions are optimized for a 0.6mm nozzle. If you print with 0.4, you might be able to use a thinner lip, but then you might want to use PETG instead of PLA just to avoid breakage.