1 / 4
Bait Box Key, incl. Fusion360 & STEP Files
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Key to open Bait Boxes
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 147
- Makes
- 1
- Views
- 463
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed to open/refill bait boxes found outside my home.
Please comment if it works with your box so people can have confirmation prior to printing.
Tested to work with:
- Protecta Evo Express
Notes:
- Printed it in PETG
- 0.1mm layer height (due to 5 degree angle in horizontal orientation); 0.2mm should be fine vertically
- Printed the white key vertically (no supports) and the black key horizontally (organic bed supports)
- PETG printing on Satin Sheet required no Brim (vertically)
Obviously the horizontal orientation is stronger, less likely for the ‘key’ half to break along the layer lines.
That said, I would recommend printing it vertically, as it cleaned up more easily and key functions by pushing it in, no turning or lifting to apply forces that can break along layer lines.