1 / 4
Bait Box Key, incl. Fusion360 & STEP Files — zdjęcie 1
1 / 4

Bait Box Key, incl. Fusion360 & STEP Files

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Key to open Bait Boxes

Ocena
5 / 5
Polubienia
6
Pobrania
147
Wydruki
1
Wyświetlenia
463
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I needed to open/refill bait boxes found outside my home.

Please comment if it works with your box so people can have confirmation prior to printing.

Tested to work with:

  • Protecta Evo Express

Notes:

  • Printed it in PETG
  • 0.1mm layer height (due to 5 degree angle in horizontal orientation); 0.2mm should be fine vertically
  • Printed the white key vertically (no supports) and the black key horizontally (organic bed supports)
  • PETG printing on Satin Sheet required no Brim (vertically)

Obviously the horizontal orientation is stronger, less likely for the ‘key’ half to break along the layer lines.

That said, I would recommend printing it vertically, as it cleaned up more easily and key functions by pushing it in, no turning or lifting to apply forces that can break along layer lines.

Tagi