Five-Point Star Frames - Many Dimensions with Parametric Fusion360 Design
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.41 – €1.73 net (excluding VAT)
For file: LR2281 Example Project_0.2mm_PLA_MK3S_1h48m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.57 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 1.79 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple five-point star frame decoration to glue on gift wraps or decorate a festive table.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 76
- Makes
- 0
- Views
- 339
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Share Alike
This is my very minimalistic design of a five-point star frame decoration. I created this and other similar designs like table and gift wrap decorations. Printed in various colours and sizes, it is a wonderful eyecatcher sprinkled in the middle of a festive table.
How to Print the Star Frames
Print the star frames on one of the flat sides. As they are symmetric, the side does not matter. In the file section, you will find a PrusaSlicer example project. Use this as a good base for your settings, or check the table below:
| Nozzle Size: | no limitation |
| Layer Height: | Optimized for 0.2mm |
| Filament Materials: | PLA, PETG, … |
| Perimeters: | Two perimeters |
| Prusa Slicer Profile: | “0.2mm Quality” |
Precautions when Printing Small Objects
Depending on the filament you use, printing the star frame with this thin outline can cause problems with print bed adhesion. So, please carefully watch the print, especially the first layers.
Dimensions
The model file name has this format:
LR2281-Z<thickness>-D<diameter>.3mf
Thickness (Z)
The thickness is a number in 10ths of millimetres. Therefore 24 stands for 2.4mm.
Diameter (D)
The diameter of an imaginary circle around the rounded tips of the stars. The value is the diameter in millimetres. Therefore 040 stands for 40mm.
Catalogue PDF
In the file section, you will find a catalogue PDF with a complete overview of all dimensions. This catalogue also contains handy tables where you can easily look up all models based on a single parameter.
Each model in the catalogue is shown with an image, all parameters and the corresponding model file name. So, before you despair of finding the right model, download the catalogue and search for the model's name there.
Explore More from Meti·kumi
Interested in my designs? Browse through my collection of 3D models:
👉 https://metikumi.com/3d-models/
Stay connected on social media for the latest updates and work-in-progress insights:
About the Prints in the Photos
The prints in the photos are made on an Original Prusa i3 MK3S+ using various filaments:
- 3DJAKE ecoPLA Orange (cheap, great results)
- 3DJAKE ecoPLA Neon Orange (hard to print)
- 3DJAKE ecoPLA Glitter Orange (cheap, not orange, great results)
- AddNorth E-PLA Lucent Orange (great results)
- colorFabb Viber's PLA Pastel Orange (nice to touch, hard to print)
- AzureFilm Silk Flame Orange (easy to print, great results)
Sadly, Prusament PLA orange was sold out; otherwise, I would have preferred this over 3DJAKE's ecoPLA.
Conclusion
I hope you find this very simple design useful and that it decorates your gifts or table. If you found it useful, please rate it and upload photos of how you used it.
Happy Printing!