Counting matching models…
This model allows you to use any 1u 10 inch mounting plate as the cross member in the Labrax 10inch rack. This means a smaller printer can be used and also allows for new mounting options at both the top and bottom angled areas. Total…
This model is compatible with the lego system.
Modern Design Square Tray With Rounded Corners print it in black: it's gonna look nice
They are designed for 8 mm thick boards, and add a 4 mm thick base or foot. Could be scaled in Z (or in XYZ) for other thicknesses. The undersides have grooves which are printed first and then bridged. Ensure the first bridging layer runs…
Floor trim corners and ends Koncovky pro podlahové lišty SLK50 z Brena
This sanding block is designed for flat surface sanding as well as two specialized edge profiles for curved and inner corners. It holds sandpaper securely and is ideal for scale modeling, woodworking, and DIY tasks. The ergonomic shape…
Should print without supports. Done some time ago, but if it gets popular i will redo the project with new design ideas. Part of my collection for furniture: https://www.printables.com/@MichaMietlins_755343/collections/3218237
It’s a connector for ikea skadis, to connect four plates together. Two next to each other and one on top of them also next to each other.
This OpenSCAD code is just a few lines that will make a cube with rounded corners. It works very like the ‘cube’ statement. This code is a module so, instead of the call looking like “cube ([123, 234, 345]);”, the call would be “nice_cube…
A small, fast to print thing that cushions the corners of sharp objects, print in TPU or other flexible materials. Check out my other models! I make fidgets and useful things.
Qbrick System - 10mm and 12mm plywood workbench corners. The corners are designed for 10mm and 12mm plywood. They are mounted with good double-sided tape or glue. I printed them with TPU to make them soft. The 3mf file is from Qidi…
The corners connect wooden dowels with a diameter of 6 mm. You can build various geometric structures (e.g. pyramids, cubes, polyhedrons) by connecting several corners with wooden dowels. Just explore and have fun! Printable sticks are…
Adds the missing female corners where all ends are on one plane for 3D Printed Frame System see:
Printing Filament: PETG (not required) Brim: Enabled Orientation: Top Down (see photo of build plate)
The corners are attached using two pieces of 20x10x3 magnets - in my case, I received magnets of size 19x9x2.7 - you save on everything and everywhere :-) It partially limits the airflow and protects the corners of the printer and I hope…
Picture content: Pic #1 (left to right): LeftHand_ExtraSmall, LeftHand_Small, LeftHand_Medium, LeftHand_Large, and RightHand. Pic #2: LeftHand_ExtraSmall in hand. Pic #3: LeftHand_Small in hand. Pic #4: LeftHand_Medium in hand. Pic #5:…
This is an archive of the various parts used for our cornerstone final project. We were tasked with creating a functional catapult prototype to deliver life-saving medical supplies (ping-pong balls). This catapult was meant to be capable…
UPDATE 1.02.2024: Lids with Bambu-Logo handle for small and big AMS dryer pods The perfect-fit funnels for big and small silica buckets I think the silica boxes in AMS are simply brilliant, so the filaments can stay in AMS for a long time…
Godesic Dome Corners for 1/2 " conduit Cut equal lengt conduit and assemble. Base pieces allow straight reiser. Not a jungle jim Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill:…
Decided I wanted something more robust for carrying after being worried about damaging the card in my pocket. Used the pin protector piece as a base and created walls around that to make more of a wallet, so the original pin protector is…
As a Design & Technology technician, we are always looking for ways to improve & also add a new dynamic to our GCSE projects for the students. Working with our main choice of material, 9mm Russian Birch Plywood, we wanted a softer corner…
I always struggle to get the bed leveled on my Ender 5 s1. After making sure my Z offset is dialed in with a small square in the middle, I print this model for the corners and manually adjust the corners while this is printing. It's the…
Note : I haven't printed it yet myself, will update it by the end of April 24 Double-check the plexiglass dimensions before ordering, since I haven't verified it yet. Print instructions: Stop print to insert hinges on the Bottom Corners.…
Simple design of a corner shelf, for wall mounting, It has the 3DPlaxes logo, but you can edit it if you wish. The printer it was manufactured on was an Ender V2 Neo with a stock extruder, in PLA. I'm very happy to share my 3d printing…
This is a very simple piece to make a rounded corner so the ball does not get stuck. There are similar corners that I have printed, but I found them too big and blocking the scoring zone. These corners is easy to attach, does not block…
This was made for my girlfriend who recently purchased some catnip for our cat. The hole was much too small and refilling it was a headache I made sure the outside dimensions were 9mm x 6mm on the funnel so it should fit just fine, you…
This model is compatible with the lego system.
PETG is best, for flexibility in the bumpers, PLA works too but wont be as protective/durable Use supports There is a model without bumpers, s20case no bumpers s20case is the standard model for the bumper case s20case ace has an ace…
The corners to build the frame with the 2020 (1.5mm wall) square extrusions. The bottom one has M10 thread for regular furniture leg. The models oriented as is. Use classic supports. Mine is printed with ABS and supports with 0.1mm gap…
Remixed Honeycomb storage wall whit corners Original by @RostaP I like the original but I like it if it has a border. That's why I edited a border for it. Recommended Print settings: Layer height: 0.2 Perimeters: 4 Infil: 20%
Это дизайн Андрея Шайтера . Все подробности на видео https://youtu.be/Ub1nqJN16CQ (ставим лайки!) Я воспроизвел его для тех, кто хотел бы распечатать эту модель, но не знаком с 3D моделированием. Для тех, кто знает Fusion 360, есть…
design tray with rounded corners place your keys or money inside inspired by https://www.printables.com/model/1005130-d (I will print it at 20 likes) print it with the color you want (I think wood color is the best)
Modern Design Double Tray With Rounded Corners this is a modification of the modern design tray with rounded corners print it with any color you want (I think wood looks good)
Modern Design Square Tray With Rounded Corners print it in black: it's gonna look nice
I found the 90 degree corners of the original model a little hard to keep down. I added a fillet and reduced the thickness of the walls to 0.8 mm to make it a little easier to slice.
GRAVITRAX ; Ever wondered why they only do small and medium corners combined? You can do triple small corners now too. Is that Column in the way too? Let’s pass through it then. Just print your own! GRAVITRAX Stone with triple small…
Simple outside tslot corners. In openscad The size of the tslot can be adjusted. I have included examples for 1515 and 2020 Print instructions Category: 3D Printer Parts
Print 8 edge pieces and 2 corner pieces but mirror one of them in your slicer. A brim and slow printing speeds are recommended as i did have to make these pieces a lot thinner. Print the high tolerance files if you have a well tuned printer
These parts function as support for the lid suitable for the dennerle aquarium. The combination part is compatible with the rounded corner and the square corner. Print Settings Printer Brand: Creality Printer: Ender-3 v2 **Rafts:**…
A minimalistic under shelf/desk mount for 1U devices. Admittedly, it's a bit fiddly to mount, at least if you cannot remove the shelf and screw on the corners with the shelf turned upside down. There's enough space for ventilation and the…
This model is compatible with the lego system.
This model is compatible with the lego system.
As I had a leftover handle I adapted a 90° roller on it. Excessive rod was cut off. Two set screw rings (ø6mm) hold the roller in place. Nice add-on to my versatile tool assortment. Designed in TinkerCad, printed in PETG on my MK3S+.…
Flexible Solar Panels are ultra-light. With a tube frame (from electro installation plastic tubes) the panel becomes handy. The tubes need to be cut for this application to insert the panel's borders. One piece contains 4 corners and a…
pieces to finish off the install if you want straight edges adds 7mm all around the Tile size uses #6 screws to attach to wall
Corners for a dynamic barrier system, built of aluminium struts. I plan to add more corner types, to this design, as I prototype them. These fit around 12mm x 12mm struts (inner size is 13mm x 13mm, so 1mm clearance). They're designed not…
A drift barrier for RC drift cars designed to navigate sharper corners.
This model is compatible with the lego system.
They are perfectly aligned at the corners (model1_6, model1_7). (for wall-honeycomb-part.stl) I also added a little thickness (0.22mm) in adjacent places (model1_8). One of the screenshots shows what the original looks like. When printing…
Inside and outside corners for Living by Haro skirting boards Innen- und Außenecke für Living by Haro Sockelleisten
Small top and bottom corner pieces to prevent the need to print another row. Essentially half of the hex-end-small piece. I wanted clean borders for my hexawall, and needed a specific length. I would've had to print another row to have…
This border is easily attached to your existing Honeycomb Storage Wall (HSW). It features an angled backside on which you can install an LED strip (10 mm) that gives a you nice indirect lighting around the HSW. Which parts you need…
Little improvised version of magnetic build plate guides. This is for 5x5x5mm cube Magnets and print it in PETG on my Neptune 3 Plus.
This model is compatible with the lego system.
I wanted some more stability in the printer. So I got MakerBeamXL 1515 triangular corners. These need special z covers. So here is the edited version for a Micron+ R1 180.
Just some sphere shaped models you can cover the corners of the table and chairs, splitted, so you can easily print them. I added a threaded version and a cylinder version too. I only printed the threaded version and it did't turned out…
I have no idea why the original original is so jagged but ive corrected it
Corners for using a 25 mm / 1" Strap as a band clamp. The strap width can be adjusted by scaling or changing the parameter (in the spreadsheet) in FreeCAD. Prints without supports on its side.
Gives the ability to form beads in clay or similar material in the sizes of 5mm, 10mm, 15mm, and 20mm. This version also provides the ability to remove material with the corners in the sizes of the equivalent radius to the diameter bead…
This part is for a children's kicker table. It avoids the ball being stuck in the corners. Print instructions Scale it for your table. Mirror it and print two of every orientation.
place on any sharp corner to baby proof, my babys head is grateful I had done this and now want to share. use ninjaflex for best results, the kid will just bounce.
There are now two options to join the pieces: with glue (choose the files with the word glue ) or interlocking them (choose the files with the word click ). If you need to build a square box, print 8 Corners clamp for cargo straps glue 4…
I made this because I didn't have dice and just needed something quick to play yahtzee, and I made the corners rounded since I liked how that looked. This print profile will print a 16mm dice. If you are downloading the raw file, be aware…
Use 8mm Diameter x 3mm Height disk magnet. Thickness of acrylic door will regulate magnet pull- thicker acrylic will have less magnetic pull to keep the door closed. If there is no gap between magnets opening door will be a nightmare. So…
This piece is printed with PLA or ABS, with aleatory seam to give strenght. The first layer of .2 mm contains the letters and numbers.
Einfach ein paar Ecken um einen Karton offen zu halten, in 2 Größen Just a few corners to keep a cardboard open, in 2 sizes
Replacement or supplement wall mount for baby gates. Rounded corners to prevent injury and recessed screws. Print in supplied orientation at 0.2mm. Tested with PLA. 15% infill is adequate, increase as you see fit for increased strength.
Remixed to support a door with insulation foam applied to it, total thickness of 6mm
I recently purchased a new tablet with a rather large screen (12") and I immediately noticed how difficult it is to hold it in my hand for a long time compared to those of the past when I use it comfortably seated in an armchair both…
Wanted to utilize these great mirror sheets I had laying around to create a curing box for my resin prints. Here are the sheets: https://www.amazon.com/gp/product/B07JLGR9FJ/ I know those are unavailable, but there seems to be plenty of…
A simple protectors corners for Dungeons & Dragons Player's Handbook made in dwarf's style. Follow us in VK: https://vk.com/drunkenbadger Print Settings Printer Brand: TEVO Printer: Tarantula **Rafts:** No Supports: No **Resolution:** 200…
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Simple decorative corner pieces for your PC fans. Also included are connector pieces for situations where you have two fans very close to each other. There are models with screwholes on both sides and one sided. Two sizes to choose from,…
Decorated stair corners to keep the dust from settling in the hard to reach corners.
Alignment corners for Ender 3 to more easily put the removable print surface back on. I just used double sided sticky tape on the whole surface of the part and and it holds firmly so far.
This is a square corner remix of the Darkmatter Skirts by MasturMynd.
Cable Clip for Corners with a 4,5mm hole to screw it in the corner Just scale it to the size you want Size (Print and STL file): 20mm x 20mm x 15mm Have fun ! Kabel Clip für Ecken mit 4,5mm Loch zum Anschrauben in der Ecke Einfach auf die…
Plastic corners for the skirting boards KU51L & FU51L produced by the "Profiles and more". 90° inside corner 90° outside corner end piece (right & left) intermediate piece Original pieces:…
They are designed for 8 mm thick boards, and add a 4 mm thick base or foot. Could be scaled in Z (or in XYZ) for other thicknesses. The undersides have grooves which are printed first and then bridged. Ensure the first bridging layer runs…
remix of https://www.thingiverse.com/thing:11978 Just rounded some corners to minimize corner bulge and ringing so that I could print faster and still have a nice free chain movement. Print instructions Category: 3D Printer Parts
A spacer for dutch outlets to create more space to fit a bigger socket or switch. Usefull when you have an older hom
(deutsche Beschreibung: siehe unten) Update 2025/04/24 added an element for supporting the box bottom when long side panels are used - can be added even multiple times per side if necessary added a Version for 9mm (23/64 inch) thick…
ID Card holder - horizontal remixed - cutted corners for better support removal
This is a remix of ElementalFocus's ( http://www.thingiverse.com/thing:3421594 ) clamp cover. I resized it or scaled it down to fit the small size trigger clamps. The test piece is used to verify the slot opening on the clamp mechanism.…
I created the model to wall mount an old TV panel (the glass panel in the very front) to use as a Dry erase board. I sandwiched the glass panel's corners with felt then I fixed it to the wall with the wall mounts. The glass I'm using is…
I have my filament in a drawer beneath the Prusa Mini, nicely tucked away, but obviously the filament is not a straight line to the printer. This is drilled into the table's corner with a #6 screw and guides the filament smoothly with a…
Simple strap clamp corners for miter joints, framing, drawers or box making. Print twice to make one corner clamp. The two halves can be glued. Dimensioned for 25mm (1 inch) bands, easy to scale to any other width.
Simple tool to aid in cutting accurate and repeatable spline grooves in the corners of picture frames. Print at 50% infill or more for greater strength. I used PLA but others will work. When using this jig I recommend using a clamp to…
Note: These corners are an add-on for the MLLP 11 system. You can download the MLLP 11 basic system here: Printables: https://www.printables.com/model/1181381-the-modular-led-light-profile-mllp-11-for-led-ligh Another version, MLLP 19,…
Note: These corners are an add-on for the MLLP 19 system. You can download the MLLP 19 basic system here: https://www.printables.com/model/1190355-the-modular-led-light-profile-mllp-19-for-led-ligh Another version, MLLP 11, for larger LED…
I designed a cover for the Philipps Hue lightstripe, when putting it in corners. You print the red base and connect it with the pins. After that, you stick the lightstrip onto it. The cover is made out of 3 parts that I put together using…
updated design as per request (even if late) :( Will be working on another version that allows the stand to clip on to yjr top, back of your monitor to help clear the clutter on your desk. The trick for that version will be to make the…
Rounded the corners from the original plus opened up the centers to allow faster printing although supports and/or cooling fan are required. Added (thicker) model if the bend area is too thin in my other upload (the thicker version is…
I really liked the original design but I wanted to speed up the print with the rounded corners and I added a peg for hanging my scraper. Thanks to basnettd1 for the original upload in which my design/remix is based. Happy printing! Print…
