Bit Holder Remix with Relief Cut Corners - Improved Bit Holding
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Improved version that is better suited for the realities of 3D printing, sharp corners are nearly impossible.
- Rating
- 4.918 / 5
- Likes
- 1,810
- Downloads
- 6,569
- Makes
- 123
- Views
- 16,036
- Reviews
- 97
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
To support me the most, please download from MakerWorld
Link: https://makerworld.com/en/models/170277#profileId-186972
Hate having to use a plyers to remove the bit? Well no longer.
This remix has relief cuts on all the corners meaning the walls are what is holding the bit and not rounded 3D printed corners.
There are 2 versions -
- Just with Relief Cuts
- With Relief Cuts plus cutout to insert a 6mm x 1.5mm magnet in the bottom
Snug Fit = 6.45mm width of Hex for the Bit
Normal Fit = 6.50mm width of the Hex for the Bit.
The Snug (6.45mm) will fit the best if your pressure advance and flow is properly calibrated.
Print this version and the original and i guarantee (or your money back) that this version if far superior.