Counting matching models…
Its a Remix from AKinferno remix :) you find the original on Thingi ID 5383489. The original cames from WheatlyLaboratories Axolotl and McGybeer's "Articulated Lizard" and the head comes from “Schlossbauer” Axolotl. We painted it in…
Print approx. €3.35–€4.10 excl. taxPreliminary estimate for one variant
This is a remix of Cat Stretch by billyd. I used Meshmixer to reduce the mesh and create a voronoi pattern. I scaled it to 125% and printed it like that. If you would like to donate, please do it to the author of the original model as he…
Print approx. €1.33–€1.62 excl. taxPreliminary estimate for one variant
This remix allows you to fit the LIBRA extruder without trimming 2mm off the K1 toolhead carriage, however instead you will need to trim 1mm off the side of the orbiter gearbox housing. Caution. This may allow oil or dirt from the gearbox…
I often use the clamps in my backpack and I was looking for something less bulky with a lower profile. I reverse engineer the original and I redesigned such that is 4.5mm shorter. Note this version does not have a belt/strap slot. Printed…
I modified Sy's original design to work with Ikea Skadis pegboards
See https://www.printables.com/model/378521-laptop-stand/files for details. Use this model for the sides if you have a thicker laptop.
This adapts the corner piece of the original file to allow you to mount the filament sensor along the riser. Tony F's File was adjusted to allow the filament sensor to be mounted, the other files were used as references and deserve credit.
Replica of the genuine Fidlock magnetic base. Model has two internal cavities to drop in magnets during print then print over the top. Pause print at desired layer height to place the magnets. (Layer 60) Magnet size is 13x2.5mm. Careful…
I have a Red Ryder BB gun, which has an awkward method of loading BBs. I wanted to design a clip-on BB loading funnel. Before starting that process, I did a search and found the original design. It looked like it would save me some design…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
This is a remixed version of TigerAce1945's M18 Hellcat model. In order to more easily print it on my Mk4, I split the model into several pieces, and arranged them in a way that I thought appropriate. I also re-scaled it to HO Scale…
4x5 Day Tray for X Ray medicial film Update 241009 ver. 1.2 Fix some bug
The original was a bit tight so i just moved the faces to make it fit better. made it so you can mount the thermostat in any corner.
Remixed from my hex hole remix of the original dual HDD stand by orax, reduced height for two slim SSDs.
Notice! This is only compatible with Python for the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. About This is an XL remix of the Python Silica Gel box. It's works the same but…
This Skull Keychain Remix transforms the classic human skull into a bold, pocket-sized accessory.
Based on the original design to suit the orbital sander. It supports the weight nicely and keeps clear of the tool's shape including the dust extractor. Uses the original counter sunk screw mounting but at a different depth. Recommend a…
I don't like to use glue as the original design intended so I've added holes to secure by screw. I also made its blade holder longer as that's what I have, and a different version that have a bend for wire to exit perpendicular to fuse,…
I love the model Adamix created! As soon as I saw it, I knew exactly what I was going to use it for: My cat's litterbox enclosure. So this was one of the first practical prints I ever printed on my 3D printer. But I was having issues with…
The intent of this design is to enable the “side by side” display of a large collection of Dupont cables, while still trying to keep things as compact as possible. The print consists of a stand with ten “frames” which can pivot on the…
Great Models, just the Bed Cable Base Mount did not fit 100% on my Ender 3 V3 KE, so i tweaked it a little: - small cut out for the hole on the inside - model is 1mm longer and removed chamfer on the bottom - small clamp on the top
When I tried to use the supplied axle with my PolyDryer on a roll of Sunlu ABS with a broken ring, I found the spool wasn't lifted enough to avoid the bottom rollers. About that time I saw the One-Way Check Valve video from @clough42 and…
This is a Remix of V-Labs Knife sharpener for better Printability and M4 instead of M5 hardware. All the holes and Cavities for bolts and Nuts are modified for printability and M4. The tolerance of the swivel is decreased to .2mm. I added…
This duck is a low poly remix of a creation of Tonkaprusa (link to the model below).
Credit on Printables to: @ IDVx Consulting @ GunplaMark I have remixed and simplified the prior designs above: Revised the filament exit Revised the base and rollers to be one piece with integral desiccant bin. Left off the hydrometer and…
These are modified versions of the APX-24 parts to fit my pump kit.
Insert for the cozy game “Café Baras”, originally made by @Mister_Moody , modified to make it modular for future expansions (so no need to print the whole insert again), has an extra tray that can be used as coin bank when gaming or to…
I have not got round to printing this remix yet but the body is exactly the same as Tomex's original body except the front of it is now blank (no hex tiles) with a skull image added. You will will need to add a second extruder in…
A remix of an amazing design by Deimosfr. Moon surface model is based on the real lunar 3D data. I wanted the Border to be larger and should be uniform and not have any joints . The moon is now split into four parts and has a diameter of…
(Higher) Headphones holder with an adjustable screw to fit desk's thickness from 5 to 35mm.
Remix to fit these cheap aliexpress bluetooth sensors
I've remixed the Lid by Hsus. I just reduced the hight by 5mm but kept all other dimensions (diameters) the same. This fits my Chemex perfectly. The initial one was a bit wobly…
Just a toroid propeller used as a decoration on the table. No mounting holes, so not usable for propeller things, just to collect dust :D Printed with tree supports, maybe it is possible without supports, but I was too scarry 😃
printet with basic settings in petg. 0.2 layer, 0.4 width. on enderKE
This is a remix of the "The Laptop Saver - A sub-desk level drink holder" model clamp and a convenient headphone holder
This Santa hat that fits snuggly on the Dummy 13 head. I included files for the smooth version and the fuzzy one. I remixed this because I could not find a suitable hat for my Dummy-Elf on the Shelf. I put the color changes at 28 and 124…
I basically had nothing but issues printing the original file. I changes some things to make it able to print without any support and made it a tad larger to give a few more walls to the thinnest spots. I printed in PLA+ with a .16 layer…
Original model works really well, just needed a little clearance cut in for my car.
Instructions as per cmh's source print. I had already been using a 75mm reference point with a less refined tool and the 80mm design by cmh works extremely well so I edited his design to suit. It seems that there is no set standard (I…
Welcome Light up your next adventure with the LightCore Ranger , a remix of Dummy 13 ! New features include mounts for 5mm LEDs in the forearms and head, and a backpack that stores a coin cell battery. Follow the same assembly and…
There are two tiles, 1x1 and 2x2 compatible with Connetix tiles. Of course it's way better and cheaper to go buy the actual tiles than print basic squares but I have uploaded the bases I used to make my Mario Warp Pipe for figurines in…
Remix of @Yathani's pottery rim Adjusted through parameterization, contact me if you'd like other sizes made! I recommend printing the longest 3 ribs if your bed can fit it.
A modified version of the Remix “Stringy Christmas Tree with Realistic Bark” from jawsawn . I reduced the height for a chunkier appearance and added a support ring that the branches don't sag down and you can see the trunk better. I also…
I added four mounting holes to attach it to a board.
Remixed to support sleeved cards. I also added the value of the tokens for their storage.
In my case, I managed to print the Dodecathleon flower pot from the second attempt, after I added the improvements I mentioned in the model description and rotated the model a bit so there were no strictly horizontal planes. See the photo…
I like the modular design of FilarworKs Master Spool, but for me it was lacking some features. I wanted an area to stick a label to without it being unsupported at large portions My refill-filament was too wide for the standard…
I wanted a music box piano that was also a piggy bank! I remixed the v3 hand crank piano to use a different wind up style of music box, and added a slot for money.
I simply modified the holes for the north american wall plug to fit in, and i also made more space inside the gun space.
remix to accomodate a direct drive upgrade with hydra system. Category: 3D Printer Parts
Small Parts Organizer Drawer 4x6 (Remix with Two Dividers) This remix is based on the original Drawer 4x6 for the Small Parts Organizer ( https://www.printables.com/model/1085458-small-parts-organizers ). Modifications: Two dividers have…
I put a space for my RFID ring and a space on from for a small Philips screwdriver (that comes free w cheap electronics) Remix from https://www.thingiverse.com/thing:952885
It uses a standard key switch and allows space for wires to exit. I connected it to my computer for a DIY On/Off Switch
The ball vice I made results from remixing three models: Open Ball V1 (Ball vise system) , D-Series Ball Vise and D-series Dovetail Vises . Credit goes to Chris Borge for the original designs, Chris Deeter for his very helpful Build Guide…
The ball vice I made results from remixing three models: Open Ball V1 (Ball vise system) , D-Series Ball Vise and D-series Dovetail Vises . Credit goes to Chris Borge for the original designs, Chris Deeter for his very helpful Build Guide…
Took a very popular model and added a notch to the front to help with taking the lid on and off!
I have remixed the given 3D-models for separator wall size 4mm because the wall size of the original dividers (7mm) was much too thick for my use case. By reducing the wall thickness, a lot of time and material can be saved. The length of…
The opening for the PTFE tubing has been enlarged to allow for the filament sensor connector to pass through while you are using a enclosure. Remix from the OG:…
Loved the original version created by Adam, Just wanted to keep my cards more protected.
I mounted mine to the side of my garage cabinet, and I only had 1 hole to use! Remixed from model from User named Bukken. 10mm through hole, and can be reached through the hex pattern. I printed white to match my garage cabinet too… :-) I…
This is remixed hook for Ikea Skadis so it fits New NIntendo 3DS (non-XL) (If you dont use clear case it still would work but you can push model 0.5-0.6mm so it is more snug) Original author: @vinzcenzo
1x5 Gridfinity bin for Wera Tool-Check Plus.
gridfinity refined baseplate — now extra, extra minimal! kinda! I ran out of space in my hardware drawer, so I needed to make baseplates. I like Gridfinity Refined, but I really didn't want my new baseplates to have magnet slots. editing…
-Parts List: M3 Screw (atleast 16mm long) M3 Nut (can also be replaced with a threaded insert) Plastic Glue -Assembly: Put some grease on the shaft then put one half of the knob on the shaft so it slots in and can rotate freely then glue…
I printed the original model for my Atillery Sidewinder X4 Pro. After a while the screw came loose and sensor rotated downwards which made the filament move less smooth than before. So I made this remix based on @waintdeir's model,…
This model was originally uploaded as an STL provided by @Hi_Im_Dave . It was a near perfect fit. I took it into fusion to add add a custom designed brim/mouse ear and then i noticed that the model itself had a lot of issues. In fusion I…
Credit for the teleprompter goes to KatzCreates: https://www.printables.com/model/90999-camera-lens-mounted-teleprompter
***********V2 NOW AVAILABLE*********** Reusable Cable Tie / Zip Tie - Easy to use - Rounded End (Remix) This easy-to-use cable tie is perfect for organizing and securing your cables. It ensures your cables stay neatly in place or within a…
Printed in Voxel PLA Orange (Close to Prusament Orange, but slightly lighter) .020 layer height 2 perimeters .015 Infill - whatever infill pattern you like Supports for mounting holes
All credit goes to @755123BE for the original design. Just like the original, these covers are designed to be used with “ AeroGarden Seed Pod->Shrouded ”. The original works great and are still my go to when starting out, but as my plants…
Based on the idea of Train Whistle Mouth Piece by MJ , the mouthpiece aims to improve airflow and direct the air to the four whistles from Train Whistle . Features No supports required ✨ Improved airflow 💨 Print Ensure good adhesion :…
For music lovers on the go - a perfect fit for the Sonos Roam portable speaker - this custom mount lets you attach your speaker to the “bottle cage” of your bicycle. This is a remix of the great design Sonos Roam Bicycle “Bottle Cage”…
Additional Icons for the Operational Readiness Check Switch designed by CTZcoach. Original file here: https://www.printables.com/model/797863-anzeige-einsatzbereitschaft
Love this design, Have it on my machine, but found when the stock fan touched the back of the Motor would not work. So we extended it enough to make sure this doesn't interrupted operations. Its not pretty but it works. pictures coming soon
Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 15+ Supports: No Print Orientation: Default as modeled Brim: Optional Add a zip tie to both sides, after passing the PSU wiring through the hole:…
6mm x 2mm or 10mm x 3mm magnet holes. You can mix and match if you want. I found the 6x2 perfectly strong enough but I also have lots of 10x3 so I added those (very strong). They press-fit for me, but your mileage will vary. The 6x2 holes…
Introduction This is a conversion from H-bot to coreXY for the ExtruH plotter which I designed a while back Is it better? No , although it is different Does it look cooler? Arguably , your mileage may vary Should you print it? Probably…
In the description for the original organzier, JS500 said “it would be fairly easy to modify the card VP/theme card tray to accommodate the smaller theme cards”. I agreed, so I did. The grid bottom was achieved using a height-range…
You can the corner tile in the slicer in half to be able to use it for other games. I used height range modifier (5.8-6.2) and made the blue surface with Hilbert pattern to enhance the “sea” look. Color change 5.8 (layer 29) for blue.…
This is a direct edit of the “__raspi_module_1_01-SIF_OLED.stl” module from the Modular Snap Together Raspberry Pi Case , and the only things i changed is 1: I made the OLED cutout bigger to allow you to mount it forwards or backwards,…
Variety of lengths: Rotated Insert Hook 17mm Rotated Insert Hook 25mm Rotated Insert Hook 30mm Rotated Insert Hook 35mm Rotated Insert Hook 40mm STEP files included for remix support not needed if print orientation like in the picture.…
Printed flat on the bed with no supports. The 3 holes for the wallmount are 5mm. The 2 holes for the shelf are 4mm. It has an overall dimension of 250 x 220 x 23mm. Printed mine in Extrudr PLA NX2 Matt. In the pictures I used a 30cm wide…
This remix of the Modular 19" Rack Mount modifies the 1HE brackets by adjusting the mounting hole width for improved fitment. With these changes, the brackets should now also be compatible with 10" racks, expanding their usability beyond…
STEP files included for remix support not needed if print orientation like in the picture. Please share your makes Have fun :)
This is a remix of https://www.printables.com/model/253408-customizable-lego-compatible-text-brick-key-fobs While the original creates a perfectly fitting LEGO brick, the ring to which you attach a keyring lies flat on the print bed. This…
Upgrade my ender 3 to base Boron and Klipper and the screen in the botton was not helpful when put the enclosure
No supports required. No assembly. Just Print slide in the charger and the use. Hope you like my remix.
NO LOGO betwenner remix for short version If you've enjoyed my work and would like to buy me a coffee to support my creative efforts, you can do so through the link below. Your generosity is greatly appreciated! Buy Me a Coffee:…
I wanted to provide a 3.3V pin input to the ERCF v1.1 microfit connector, so I modified the existing design to accommodate a Molex MicroFit 3.0 6-pin connector instead of the original 5-pin connector.
My friends and I ended up using the original Universal Bearing as more of a fidget than what it was intended for, so I decided to try making a fidget-specific version. When printing at 85% scale and the outside facing upwards, I had…
This is a remix of the linear rail carriage for the X1 to X2. For more info refer to https://www.thingiverse.com/thing:4597994/files Thanks patsp and uspaeker for the original work.
It's orientated for no supports, but if your z-axis is a little wobbly may want to lay her flat and do organic supports for the front lips.
I found the original opening for the portafilter to be too small, and I wanted a way to include my WDT Tool as part of it. I have left these as .3mf files so the openings/etc can be easily tuned as needed. I used Dacy's tray and storage…
A very simple remix to allow mounting of an ESP32 camera on top of an x-axis motor cable protector .
Original was cute, but 2mil polygons is a bit... excessive. Here's a 60k version, with virtually identical quality.
![Train Whistle - Improved Airflow [remix]](https://media.printables.com/media/prints/1153582/images/8703587_ab402d98-52b4-42c7-869d-b51983395d24_f020e1eb-b99f-4928-a666-87bbe62c6de2/20250118_152138v2.png)
![ESP32 Cam Motor Joint & Cable Protection [remix]](https://media.printables.com/media/prints/1196289/images/8988748_49a4b33a-22e4-4770-afcc-59ca1efb7ee2_446e658b-d55a-461f-90c2-923195b0d872/854fb883-0c6a-404d-8c4e-f79df2ebc5e2.png)
![[Remix] The Cat 2 (reduced)](https://media.printables.com/media/prints/1196366/images/8988611_9d515713-c22a-44bd-b2fb-0552f3d5ec4c_ed504f78-dddf-486d-98cf-c04d50395c0e/2025-02-17-22_18_15-kitty60k-orcaslicer.jpg)