1 / 3
Remix - Prusa Enclosure PSU Holder Wire Pass Through Plug
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of PSU Holder Plug with hole, provides a bit more protection for the wiring, or for a custom external connector.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 26
- Makes
- 1
- Views
- 196
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v3.0
Recommended print settings:
- Material: PLA or PETG
- Layer Height: 0.2 mm or less
- Infill % : 15+
- Supports: No
- Print Orientation: Default as modeled
- Brim: Optional
Add a zip tie to both sides, after passing the PSU wiring through the hole:
Final Installation Location:
