Counting matching models…
It works with the same concept as the remix one so for functionality I strongly encourage you to check out the original, because I didn't print the result. I reccommend printing the top parts with the lettering upside down for better…
Spool holder for the Flashforge AD5X inspired by the great "Filler" spool holder. I was originally going to just modify the filler, but found that there were no .step files for the parts I needed to modify, so I just started from scratch.…
My Baofeng UV-5R knob recently broke, so I decided to make a new one that is more ergonomic and durable. The new version has ribbed surface for better grip, better markings (that could be filled with colored enamel paint ;) ) and far more…
A remix of the humidity holder to fit the ones with a beveled face from the likes of AliExpress . I recommend printing 2 of these (one for each end) as it holds it very securely. Easy print with no supports if printed on its side.
CLICK HERE TO DOWNLOAD LATEST RELEASE FROM MY GITHUB The purge line from the A1 has been spliced into the P1S start GCode. The purge line changes location so it is (almost) always placed beside the print, and is much smaller than the…
I had the idea to turn used soda cans into little storage cups which could sit out of the way but be pulled down as needed. The pegs snap in to the pegboard, but can still be removed if needed. This design works with US 12oz cans, but…
Better Countdown Timer for RC Model Sailboat Race Starts Products used from AdaFruit AA Battery Holder with On/Off Switch and 2-Pin JST[ID:4779 ( JST-PH 2-Pin SMT Right Angle Connector[ID:1769] (for power in to sound board) 1 x Panel…
Hide a fat roll of benjamins with your bananas in the kitchen, or use as hot dog storage? Maybe give as a gift and see how long it takes them to open it. The threads are pretty tight right off the plate, so you'll have to twist back and…
My Baofeng UV-5R knob recently broke, so I decided to make a new one that is more ergonomic and durable. The new version has ribbed surface for better grip, better markings (that could be filled with colored enamel paint ;) ) and far more…
Tired of cheap shower curtains, I decided to put my printer to work my own. This design is a single piece, flex into place, hook featuring an interlocking collapse. This is an easy print for any decently tuned printer. The spacing for the…
Just a better version of my previous gun this time optimized for 3d printing Category: 3D Printing
english :If you are looking for a pulley that doesn't make noise for your cr10, and that has conical tabs, here is your file, I looked online for a compatible file for the printer and couldn't find it, so I decided to model it For those…
Protect your board's base when stacked for travel with other Quiver Connector and/or Ride Mode mounted boards. These quiver protectors are much more durable than the stock Karakoram foam quiver protectors. They are made from a durable…
I made a big mistake and put my boards up, with half of them not being aligned with the other half… so had to push out a dozen or so inserts out. My thumb complained… so here's one with a little longer lever to go easier on the thumb :).…
I wanted a better box for storing screws! And I'm really pleased with this set - the result of a somewhat obsessive design process - they are great for screws but also useful for all sorts of other things as well. When you buy screws here…
I don't imagine there are many of these showerhead holders still out there, but if you've got one and it's damaged and you want to try to repair it, try this! I think ours fitted the original tubing ok when we first had the shower fitted…
For SkyRC B6 Neo With .step files Base on : https://www.printables.com/model/921754-skyrc-b6-neo-lipo-charger Take care ! 💙 2025/03/17 - Added feets bumper & minor changes
This is a cover design for the electronics box of the Prusa Mini or Mini+ loosely based on a design by @thefreewheeler (see here: Prusa MINI Z-Top | Electronics Box Lid ) , which attaches like the original Cover Plate. It gives the…
DX Engineering Carbon Fiber Mast Accessories. DX Engineering sells a 33' heavy duty carbon fiber collapsible mast. I use this mast to elevate an End Fed Half Wave antenna for amateur radio usage. I use a tripod and 3 guys lines to…
5x M8 screws, 5x M8 nuts and 4 washers. Print with PETG. *skimmer3.stl should be printed really strong (5-6 walls + increased bottom and top layers + 20%+ infill).
The original PSU terminal cover is too tall and very tight fitting. It is very hard to remove since there is nothing to hold on to. This is a very simple remix of of the original “C1 PSU COVER R1.stl” to reduce the height by 0.8 mm for…
This model improves the air seal on the SMILEY with the brass breech. Despite the name, you do not actually need to use the wider brass piece. It will especially help when using a K25 spring. I have only tested it on the Talon version so…
Spool holder for the Flashforge AD5X inspired by the great "Filler" spool holder. I was originally going to just modify the filler, but found that there were no .step files for the parts I needed to modify, so I just started from scratch.…
Better Box – Available in Multiple Sizes (XS, S, M, L, XL) A practical box available in five sizes (XS, S, M, L, XL). The model is designed to be printed in two separate parts – the lid and the base. This makes printing easy, requires no…
This is an improved pedal frame for the most usual type of pedals. It is wider and it has much better grip! They have as much grip as big platforms. It makes pedaling more efficient and comfortable. You can also pimp your ride printing…
Improved version of the original design by Kilian. The standard tolerances were too tight for my setup, so I refined them and modified the shape for better durability and easier mounting. To detach/remove the hook, you need to press the…
Update: I've added files to relocate the filament runout sensor to the front of the spool. You'll need 30-40cm of wire, either a proper extension cable with the factory clip, or- like I did- some jumper cables for Arduinos, prototyping,…
Modified to remove the bottom corner edge to provide more clearance.
Works with 1515 extrusions and any panel dimensions. You just need 10mm bar or pipe of any material. I used AL bar, but wood or plastic should be fine too.
I fixed a few issues I had when printing the original by "frmdbl": Strengthened the prongs at the top by attaching them to each other with a ring, so it doesn't bend too much during printing and ruins overhangs. Thickened the bottom cone…
Update 27.10.2025 - new version v1 and v2 with better hooks. Supports are required for the hooks. If you would like to support me - you can buy me a coffee :) Please try to share photo of your print <3 Check out my other models HERE Any…
Mounting plate for the Moza R5 wheelbase Inclination angle: approx. 6° What you’ll need: - 2 × M6 6×40 screws (for attaching the wheelbase to the plate) - 2 × M6 6×30 screws (for attaching the wheelbase to the plate) - Any suitable M6…
Updates 2026-03-29 added a 20.5mm version. This version also has a slightly thinner outer ring (1.0mm vs 1.2mm) 2024-03-17 Added different options for leg thickness. Also realized that most problems with legs fitting are solved with…
I recommend using the supports I included. The origin is set the same as the model (use supports marked "square" for the tray with ends marked "square") so that you can use the "Join" feature of your slicer. You could also use your slicer…
Where's the problem? I love my Creality Space Pi filament dryer but printing directly from it has been slightly problematic. The Bowden tube always seems to get pulled into the dryer and wrapped up in the roll, especially during long…
Trichter, um Wolkenkraft Kapseln besser füllen zu können. Kapsel einfach einlegen in mit dem daumen klemmen Funnel for easier filling of Wolkenkraft capsules. Simply insert the capsule and hold it in place with your thumb.
The first layers are fixed, for anyone who got annoyed by them. Beware though.
Added some bridges over the m3 nut holes to make it easier to print standing upright. Designed for .2mm layer height.
Maybe you print it in two parts (lay it half cutted sideward onto the printing-bed) and glue both parts together after printing. I never printed it by myself so far (I only implemented the remix because of a user-suggestion).
Wanted a spare RC Masthead Wind Indicator. 1.5mm SS rod, K&S #5126 3/32" brass tube, lead fishing weight, 3D printed vane, 4mm SS bead w/ 1.5 mm hole, 22 gauge wire insulation, super glue and silver solder.
~Better Together Series 💘 The Better Together series keeps growing with this adorable duo of love-struck piggies 🐷💖 All animals in the collection are fully compatible and can be mixed & matched freely . Magnets are optional, but highly…
Credits to revarbat for making the Snappy V3 3d printer. This model fixes the open space that was shown in the 3d printable 3d printer to make it more seamless. There are also templates I designed to make upgrades for this printer.
This is just a remix of the vent tab on LEOTE's lid with vents for the K1 / K1 SE. I guess the original version was made so you could put a dry box on top of the printer… but you can't use the vent in that case so why not add a large…
I decided to improve the lightsaber for LEGO-like toilet paper holders. IMPORTANT - you will need to glue the figure hands as shown on the CAD picture (facing outwards) Bill of Materials 1x set of printed parts 1x M3x14 screw and…
Pinecil Gridfinity stack that can store your soldering iron, 5 tips, cable, stand and other accessories.
These models are intended for decorative and display purposes and can be freely scaled or customized for personal projects. 📃 Usage & Licensing 🔹 Personal Use: You may print and display this model for your own enjoyment. 🔒 Commercial Use…
This wheel replaces the original serving wheel from hoco's 2x2 Gridfinity Magnet Server. The new wheel has a more ergonomic edge that can also be moved with a magnet pen. It also holds 8 magnets instead of 2, cutting the 1/2 turn down to…
IKEA Alex Ergonomic High-Rise Feet This is a custom-designed riser foot for the IKEA Alex drawer units. I designed this because I own both the older Alex unit (plug feet) and the newer version (stick-on feet) and needed a unified solution…
This bilresa mount uses the original mounting plate and improves the look and stability of the remote. The pushing of the buttons is not disturbed in any way. The mount is designed based on the 3D models provided by ikea, which I shared…
This is a remix of https://www.thingiverse.com/thing:2688409 Burger patty press for Ø130mm pattys. I modified the holes so they provide better grip. There is also a 3-hole version now. https://youtu.be/MSk-uTYajUc enjoy your meal! Source…
I also have an M130 motor, but after discovering that I couldn't print the previous model with a 0.4 nozzle , I decided to modify it so that the Bamboo A1 Mini could handle it. For printing , it is better to turn the model upside down .
Load like normal into crossbow. Adhesion can be tricky so make sure to have a brim.
I only remixed it. I did not printed it by myself.
This is a remix between two models, print at 20% infill with supports for the flat overhangs.
Variation of "dock mount variable part 2". The part is 5.5mm shorter.
I improved the spring by lowering the pressure put on the darts to the roof of the magazine so that they can slide out of it easier and not jam.
idk but go to jlp3dp to print it out of metal stainless steel all of it.
Use this to test things like looks and strength about different kinds of infill Adjust however you like! Just make sure to pause the print about halfway through to see the infill
Help your child discover the joy of reading with this set of three specially designed reading focus tools. Created for early readers, children with dyslexia, attention difficulties, or autism spectrum disorders , these simple but…
Use petg or pla for best quality, enjoy!
I have run through a few different methods of wall mounting Ikea Skadis boards and all of them annoyed me (none more so than the mounts they come with from Ikea). Since I had more boards to mount I set myself a task of designing a new…
This is a better Sofrin SC31 Pro mount for your Honeycomb Storage Wall, compared to the one I previously put together . It just kinda slips in. It's super easy to grab and use the flashlight quickly. It holds it surprisingly well,…
I have designed a new Milwaukee battery mount for the Panthem loppers/pruning shears, since the original mount had a lot of play and the battery wobbled significantly. This is the Shear:…
I designed a new bumper for the AIRROBO P20 because it kept getting stuck on table and chair legs. The new bumper has solved the problem. As always, I have uploaded the Fusion360 files, Step files, and 3mf files. Please leave a Like or a…
Printed in PLA on Prusa Core One. Should fit regardless of printer type, as long as dimensional accuracy is decent. Tolerances are a bit tight on the rail for a good snug fit. Cad files are at…
The official Prusa Buddy3D Camera for the CORE One/+ is an awesome printer add-on that works great and integrates well into Prusa Connect, but the angle that it mounts onto the frame doesn't allow you to see a large part of the back-right…
THIS HAS NOT BEEN TESTED!!!!! This is my gecko house but better, it featuers a second floor with a little ramp to go down, in case your gecko gets lost. The stairs to the second floor are textured, they COULD hurt your gecko because THIS…
modified version of the wirecatch to be printed without support and without issues more easily
CLICK HERE TO DOWNLOAD LATEST RELEASE FROM MY GITHUB The purge line from the A1 has been spliced into the P1S start GCode. The purge line changes location so it is (almost) always placed beside the print, and is much smaller than the…
What could be better than a target? A smiling target.
A Lean Dog Hunts Better Than A Fat Dog Category: Office
The original PSU cover had such a tight and recessed fit that it damaged the PSU sticker and was difficult to install/remove. I found Combolek’s version which resolved the tight fit perfectly but did not address the recessed cover. I…
To make this successfully, you need a switching usb c charging board for 3.7 volt batteries (The one I have is 3A and I changed the resistor to 2A so it wouldn't overheat) and a 3.7 volt 5200mAh battery. place the charging board into the…
You will need 2 m5 inserts and for now you need to remove the display to make this work. Personally I'm using klipper so the display did not work anyway. You could use both the screen and this mount but you will need longer m3 screws to…
A small remix on Maximsachs cable clip, I found that it held onto cables a bit too well, as it was a bit hard to remove the cable from the holder at times, and it didn't have enough surface area for double-sided sticky tape to do a good…
I remixed this model to have venting holes on the sides. The size that currently has is for the creality spools. If you want to change the size for using it in another spool you will have to change the holes parameters because they are…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 132.97x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual…
What's new: Taller top parts A-D 3 + Slim version A-D 4 + Files for CNC or Laser cut + Better door handle for heat-set inserts M3 This enclosure is NOT compatible with top panels from original kit. You need to cut out the plexiglass using…
Small modification to the dummy's joints, making the knees possibly easier to put on.
Better Model Yacht Launcher Design allows the launcher to lie flat for one plane for travel. Then for usage you will rotate the lower curved bottom curves tubes into position to cradle the model yacht for launching and retrieval.…
A remix on a community uploaded cable cover for fungineers based controller boxes in the VESCify discord
Better Scoop is a hash/kief scoop with spring-loaded trigger that hits(or vibrates) scoop so you get all the goodies in bowl and not on the floor. Also has cool topographic pattern. Print in PLA/PETG 0.1mm(or just use auto detection in…
this is a remix from Ready's silly shell holder that can print easier and not need Supports.
After purchasing the USS drybox, I found that handling the universal spool holder was not entirely comfortable for my hands, so I enlarged its front part and added inscriptions...After this change, I find the handling more comfortable.
I have an Asahi Pentax 50mm lens, when focusing the rear element can colinde with the adapter, this remix adds more space after the thread so this does not happen. This should in general improve compatibility with more lenses.
A better scraper it is. Why would so many makers print a scraper? I've never used one since my flexible print bed and my tiny fingers work fine (don't you ever touch the print bed). Ok, it must be some kind of fetish appeal. But…
Easy to remove, these covers have a small lip to aid in removal. The original hole covers for Rise Hydroponic Gardens are difficult to remove because they sit flush making it difficult to get your finger under them. Compatibility: All…
![[Better Grip rmx] Burger Patty press 130mm !! ~200gPatty](https://media.printables.com/media/prints/bb09a35b-ff0b-4c04-aabc-21591554ee48/images/11981289_49e38697-cbe1-4aff-bdc1-a4b218c439e3_d8246084-2710-415f-82a0-3244dd356797/unbenannt.jpg)
