Liczymy pasujące modele…
english There are so many tube squeezers out there, but I have never seen the slot angled on any of them. I find that the angled slot allows the tube to be pushed out directly with the printed part. Inspired by the most diverse squeezers…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Info: glasses temples bent more behind ear than https://www.printables.com/model/205857-fun-nerd-glasses-with-interchangable-lenses-choose so glasses are more safely positioned for usage with :…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed in PLA at 5% grid infill. Print flat on the long bottom edge with all supports or else the peg at the end will not print properly. This model only fits the movement tools that come in the essentials kit. It is not compatible with…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
To prevent jumper wires with the ubiquitous 0.1" DuPont connectors from inadvertently being pulled out. Fast and simple to print, for 1 to 8 connections, in both standard lengths. Print at 0.2 mm layer height, without supports or brims,…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
This version helps all those who are looking for a special solution to optimize filament routing. This version allows the filament routing to the MMU to be perpendicular without a radius and reduces the bends. This version is also 100%…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Better Countdown Timer for RC Model Sailboat Race Starts Products used from AdaFruit AA Battery Holder with On/Off Switch and 2-Pin JST[ID:4779 ( JST-PH 2-Pin SMT Right Angle Connector[ID:1769] (for power in to sound board) 1 x Panel…
Wydruk około 1,64 €–2,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update 2025-10-21: After using the corkscrew for a few months I found that the small/short support is not robust enough. It bends too quickly. That is why I modified the bigger support so it gives more hold to the small one. Have a look…
Wydruk około 2,21 €–2,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update 2025-03-13: See also my “improved” design. (https://www.printables.com/model/1240192-an-improved-better-corkscrew) When you are a waiter, and still crafty, you probably daily use the traditional corkscrew where you hold the bottle…
Wydruk około 1,12 €–1,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is probably final evolution of my parametric funnels - with an exposed vent this funnel will be a breeze to keep clean, and although it may not suit all situations, if you need a parametric funnel with a bent spout or a funnel with a…
TLDR: This post is quite long and detailed because it involves the findings from hundreds of experiments. If you're just looking to try the best settings, download TestSuite_OrcaSlicerOnly_V6.3MF , make sure to set your own filament…
While the world seems to talk about eddy current based sensor probes nowadays, I still like the little PCB Klicky 🥰. So building my 2.4 I just optimized what is out there to dock the probe securely in place. Support me : Please leave a…
A great deal of care must go into a design before there’s nothing left to optimize. I think we can all agree that Zack Friedman’s Gridfinity system has become a benchmark for organizational systems across sharing platforms. However, every…
(V2 Better Hinge) STLs can be split to parts in your slicer and changed color. For the flush model 3 parts need to be made yellow, all the rest were black. Only needs to change filament twice so you can easily do it manually if you don't…
Leave a Like or a Make to support me ;) Improvements: -clampable clip with different dimensions (depending on the ventilation grille, see pic) -reinforced backplate -attachment points changed to be able to grip even large smartphones The…
Hello guys!! I have optimized the wing components to enable better single color printing. I would like to acknowledge the fantastic work of the original designer and give credit for their initial creation. Specifically, I have separated…
This is the second iteration of the protractor I made some time ago. Protractor by JohnMartin | Download free STL model | Printables.com This version is made to print flat with multi-color but there is an STL to print engraved lines and…
This is a chisel sharpening jig. It accommodates chisels as small as 0.25 inch and as wide as 2.25 inch. There are 2 holding positions which I'll call the lower vise and the upper vise. Place the chisel into the vise so that its flat side…
A parametric case for standard 1/4″ hex bits , designed for practicality and flexibility. The main case is print-in-place and uses 4 mm DIA × 1.5 mm or 3 mm thick magnets to keep it securely closed. The spring tabs in each row hold the…
It works with the same concept as the remix one so for functionality I strongly encourage you to check out the original, because I didn't print the result. I reccommend printing the top parts with the lettering upside down for better…
A better more robust version of the GoPro tripod mount (with an editable file) This GoPro tripod mount design provides superior strength and durability and outperforms all vertical designs. Optimized for the strongest printed orientation…
Better, Faster, Cheaper. Pick any two. Or actually, write whatever words you want on the front. Represented as a physical card that you can toggle the toggles, and one will always be off. If you can, print the “Short Switch” and “Top…
This add-on improves the filament retraction of the spool in Creality CFS, by eliminating the friction between the factory bumpers and the spool, which can become problematic as spools get lighter with less filament on them. Also no more…
Lightweight Gridfinity bins made with cardboard. This a total remake of Daviel Black's original design. I made this because the rounding in his design was wrong and the bins wouldn't click onto the grid. This lets you reduce the amount of…
Spool holder for the Flashforge AD5X inspired by the great "Filler" spool holder. I was originally going to just modify the filler, but found that there were no .step files for the parts I needed to modify, so I just started from scratch.…
After many comments that the words “Better”, “Faster” and “Cheaper” should be modelled rather than written on. I threw this together quickly.
Hey folks, inspired by the video on Wolfgang's channel I became aware of @pixelwave's design. At first I really liked it, but after I printed it out and was in the process of preparing the case, it occurred to me that I need to do…
This is an improvement on the excellent 5-Wheel Buffer for MMU2 design. The most significant improvements: Uses M10 PTFE tube quick fit connectors that prevent the tubes from sliding out. Narrower fit between wheel and arms, preventing…
Fully Metric Remix of "Better Chisel Sharpening Jig" by @GarageTimeDavid_3790 Changes: Adjusted hex holes from ¼" (11.1125 mm) to 10 mm to fit M6 bolts Adjusted round holes from 8.4 mm / 6.4 mm to 8.0 mm / 6.0 mm respectively
As there was the contest for new container designs I decided not to do the #1000 modular organizer container with fancy lid design, which can be bought for a fraction of the filament costs in a discount store, but to utilize the vase mode…
I fixed a few issues I had when printing the original by "frmdbl": Strengthened the prongs at the top by attaching them to each other with a ring, so it doesn't bend too much during printing and ruins overhangs. Thickened the bottom cone…
This is a remix of the metric remix by @energeticinterpretation44 of the original model by @GarageTimeDavid_3790 All I did here is to enlarge the M6 holes slightly so that M6 bolts have proper clearance. All kudos to the original makers.
Neue Version mit Daumenauflage!!! Meine Hand ist größer als der durchschnitt und die Maus hat nicht gut in meine Hand gelegen. Da ich an meiner Hand nicht ändern kann musste die Maus angepast werden. Die Maus ist im ganzen länger und…
The original has people complaining that the hooks are really easy to break; I changed a few things to address that: I filled in the hooks to be solid. The original was the same as the injection molded version, and the walls were very…
The following PDF contains custom settings that work better than the default profile included with the Flashforge Creator 5 and Creator 5 Pro. Most of these settings will also work with the Flashforge AD5X and possibly other printers such…
This Gcode is the original G Code but in this one it scans for the bed QR Code Then it does a Home Check so that if it doesn't see the QR Code it PAUSES asking for BED or Continue, IF you add the plate IT NOW SCANS that Plate and then…
a star fidget that moves up and down, with a handle.
Meine Hand ist größer als der durchschnitt und die Maus hat nicht gut in meine Hand gelegen. Da ich an meiner Hand nicht ändern kann musste die Maus angepast werden. Die Maus ist im ganzen länger und hinten unter der Hanfläche an den…
I got tired of dealing with the flimsy designs for the Blind Shaker Mount so I designed my own. Not only is this design stronger and more rigid, it also allows for the shaker to be held in two different ways. 1. With the lid on top held…
I've been printing with the Original Lack Enclosure for a while now, and I wanted a new enclosure with a better air seal to hold a higher ambient temperature for printing as well as for use with a activated carbon VOC filter. A lot of…
My Baofeng UV-5R knob recently broke, so I decided to make a new one that is more ergonomic and durable. The new version has ribbed surface for better grip, better markings (that could be filled with colored enamel paint ;) ) and far more…
I like the Home Assistant Yellow board, but the enclosure is not functional. It lacks venting holes, making the compute module and the M.2 SSD sweat. Moreover, the PoE circuit adds heat to the closed chamber. Therefore, I've remixed the…
I maintain enhanced machine, filament, and process profiles for Snapmaker Orca in the following GitHub repo: https://github.com/jeremyreeder/snorca-profiles Purposes To improve print quality compared to factory-provided profiles. To…
A remix of the humidity holder to fit the ones with a beveled face from the likes of AliExpress . I recommend printing 2 of these (one for each end) as it holds it very securely. Easy print with no supports if printed on its side.
I made angled spool holder caps to have a better view on what it's written when you are in front of the printer. CONTENT I made different caps: Material caps (PLA, PETG, TPU, ASA, ABS, PA, PP and PC) Number caps (1 to 8 for each side) For…
This is a simple frame to center an iPhone 14pro with case for more effective inductive charging on BMW i4. Without this my phone would slide around and periodically stop and start charging. This frame keeps the phone centered. While…
CLICK HERE TO DOWNLOAD LATEST RELEASE FROM MY GITHUB The purge line from the A1 has been spliced into the P1S start GCode. The purge line changes location so it is (almost) always placed beside the print, and is much smaller than the…
Print without infill and 2 walllines. Maybe scale the Object +-5% for better tolerance. Have fun.
I was really excited to ‘pimp’ out my copy of “Survive: Escape from Atlantis” to include not only the inserts from ‘glitch17’ found here: https://www.thingiverse.com/thing:2789823 but to also incorporate the ‘Better Boats’ from ‘vzom’…
Mods to adapt original to work with 4mm rope and Shore95A TPU
I have found when printing PLA, on some parts where even cooling is critical, the stock blower duct on the Replicator 2 is uneven. Favouring right to left movement, rather than left to right on the X axis. So I set about designing a new…
I found it impossilbe to fit all the cables inside. i adjusted the drawing and now it fits nicely and tight enough.
I had the idea to turn used soda cans into little storage cups which could sit out of the way but be pulled down as needed. The pegs snap in to the pegboard, but can still be removed if needed. This design works with US 12oz cans, but…
The thumb studs that Gerber includes with the Paraframe from the factory are way too long and uncomfortable to use, so I modeled these to actually be flush with the frame of the knife and to be much more comfortable. The two halves just…
Most people know about Pythagoras' theorem from school, and it’s often taught with a visual proof using three squares around a triangle, most commonly with sides of length 3, 4, and 5: But in my opinion, this is not overly helpful. To see…
Print it and put it in place of the guns trigger
This model is designed to slice through tape on packages and parcels. It uses the same working end at its “little brother”: https://www.printables.com/model/1822226-box-opener-serrated It is an easy print where “quality” slicer setting is…
Security is GOOD, but logic is BETTER
I made a pegboard wall using a hole bit of 25mm however all I could find were wood dowels of 24mm so I designed a little shell to go around this 24mm dowel to increase the size to 24,8mm which fits comfortably in this 25mm hole
This is an improved pedal frame for the most usual type of pedals. It is wider and it has much better grip! They have as much grip as big platforms. It makes pedaling more efficient and comfortable. You can also pimp your ride printing…
I wanted to mount a ITTF approved net on our STIGA Performance indoor table. This part is to replace some parts that needs to be removed to be able to mount a new net. I mounted Stiga Premium Clip net. Stiga Master or Premium VM could…
A weight for the Pine64 Pinecil V2 to improve the ergonomics and reduce the top-heaviness of the iron. When combined with two steel rods (D = 4 mm, L = 44.5 mm), the weight holder adds about 10 g to the iron, mostly at the back. This…
Replace the cardboard from your favorite stick bait with this more convenient storage. The tail hook is held in place so that the lid does not need to be fully opened to retrieve your lure. Simply crack open the top and retrieve. No more…
A Lean Dog Hunts Better Than A Fat Dog Category: Office
I have designed a new Milwaukee battery mount for the Panthem loppers/pruning shears, since the original mount had a lot of play and the battery wobbled significantly. This is the Shear:…
Printed in PLA on Prusa Core One. Should fit regardless of printer type, as long as dimensional accuracy is decent. Tolerances are a bit tight on the rail for a good snug fit. Cad files are at…
See images for printing and use instructions Feel Better Syringe (Tactile dosing for the visually impaired) A concept design demonstrating how a syringe could be read entirely by touch, so people who are visually impaired could measure…
Hide a fat roll of benjamins with your bananas in the kitchen, or use as hot dog storage? Maybe give as a gift and see how long it takes them to open it. The threads are pretty tight right off the plate, so you'll have to twist back and…
My Baofeng UV-5R knob recently broke, so I decided to make a new one that is more ergonomic and durable. The new version has ribbed surface for better grip, better markings (that could be filled with colored enamel paint ;) ) and far more…
Tired of cheap shower curtains, I decided to put my printer to work my own. This design is a single piece, flex into place, hook featuring an interlocking collapse. This is an easy print for any decently tuned printer. The spacing for the…
Just a better version of my previous gun this time optimized for 3d printing Category: 3D Printing
english :If you are looking for a pulley that doesn't make noise for your cr10, and that has conical tabs, here is your file, I looked online for a compatible file for the printer and couldn't find it, so I decided to model it For those…
Protect your board's base when stacked for travel with other Quiver Connector and/or Ride Mode mounted boards. These quiver protectors are much more durable than the stock Karakoram foam quiver protectors. They are made from a durable…
I made a big mistake and put my boards up, with half of them not being aligned with the other half… so had to push out a dozen or so inserts out. My thumb complained… so here's one with a little longer lever to go easier on the thumb :).…
I wanted a better box for storing screws! And I'm really pleased with this set - the result of a somewhat obsessive design process - they are great for screws but also useful for all sorts of other things as well. When you buy screws here…
I don't imagine there are many of these showerhead holders still out there, but if you've got one and it's damaged and you want to try to repair it, try this! I think ours fitted the original tubing ok when we first had the shower fitted…
For SkyRC B6 Neo With .step files Base on : https://www.printables.com/model/921754-skyrc-b6-neo-lipo-charger Take care ! 💙 2025/03/17 - Added feets bumper & minor changes
This is a cover design for the electronics box of the Prusa Mini or Mini+ loosely based on a design by @thefreewheeler (see here: Prusa MINI Z-Top | Electronics Box Lid ) , which attaches like the original Cover Plate. It gives the…
DX Engineering Carbon Fiber Mast Accessories. DX Engineering sells a 33' heavy duty carbon fiber collapsible mast. I use this mast to elevate an End Fed Half Wave antenna for amateur radio usage. I use a tripod and 3 guys lines to…
5x M8 screws, 5x M8 nuts and 4 washers. Print with PETG. *skimmer3.stl should be printed really strong (5-6 walls + increased bottom and top layers + 20%+ infill).
The original PSU terminal cover is too tall and very tight fitting. It is very hard to remove since there is nothing to hold on to. This is a very simple remix of of the original “C1 PSU COVER R1.stl” to reduce the height by 0.8 mm for…
This model improves the air seal on the SMILEY with the brass breech. Despite the name, you do not actually need to use the wider brass piece. It will especially help when using a K25 spring. I have only tested it on the Talon version so…
Spool holder for the Flashforge AD5X inspired by the great "Filler" spool holder. I was originally going to just modify the filler, but found that there were no .step files for the parts I needed to modify, so I just started from scratch.…
Better Box – Available in Multiple Sizes (XS, S, M, L, XL) A practical box available in five sizes (XS, S, M, L, XL). The model is designed to be printed in two separate parts – the lid and the base. This makes printing easy, requires no…
This is an improved pedal frame for the most usual type of pedals. It is wider and it has much better grip! They have as much grip as big platforms. It makes pedaling more efficient and comfortable. You can also pimp your ride printing…
Improved version of the original design by Kilian. The standard tolerances were too tight for my setup, so I refined them and modified the shape for better durability and easier mounting. To detach/remove the hook, you need to press the…
Update: I've added files to relocate the filament runout sensor to the front of the spool. You'll need 30-40cm of wire, either a proper extension cable with the factory clip, or- like I did- some jumper cables for Arduinos, prototyping,…
Modified to remove the bottom corner edge to provide more clearance.
Works with 1515 extrusions and any panel dimensions. You just need 10mm bar or pipe of any material. I used AL bar, but wood or plastic should be fine too.
I fixed a few issues I had when printing the original by "frmdbl": Strengthened the prongs at the top by attaching them to each other with a ring, so it doesn't bend too much during printing and ruins overhangs. Thickened the bottom cone…
Update 27.10.2025 - new version v1 and v2 with better hooks. Supports are required for the hooks. If you would like to support me - you can buy me a coffee :) Please try to share photo of your print <3 Check out my other models HERE Any…
Mounting plate for the Moza R5 wheelbase Inclination angle: approx. 6° What you’ll need: - 2 × M6 6×40 screws (for attaching the wheelbase to the plate) - 2 × M6 6×30 screws (for attaching the wheelbase to the plate) - Any suitable M6…
Updates 2026-03-29 added a 20.5mm version. This version also has a slightly thinner outer ring (1.0mm vs 1.2mm) 2024-03-17 Added different options for leg thickness. Also realized that most problems with legs fitting are solved with…
I recommend using the supports I included. The origin is set the same as the model (use supports marked "square" for the tray with ends marked "square") so that you can use the "Join" feature of your slicer. You could also use your slicer…
Where's the problem? I love my Creality Space Pi filament dryer but printing directly from it has been slightly problematic. The Bowden tube always seems to get pulled into the dryer and wrapped up in the roll, especially during long…
Trichter, um Wolkenkraft Kapseln besser füllen zu können. Kapsel einfach einlegen in mit dem daumen klemmen Funnel for easier filling of Wolkenkraft capsules. Simply insert the capsule and hold it in place with your thumb.
The first layers are fixed, for anyone who got annoyed by them. Beware though.
Added some bridges over the m3 nut holes to make it easier to print standing upright. Designed for .2mm layer height.
Maybe you print it in two parts (lay it half cutted sideward onto the printing-bed) and glue both parts together after printing. I never printed it by myself so far (I only implemented the remix because of a user-suggestion).
Wanted a spare RC Masthead Wind Indicator. 1.5mm SS rod, K&S #5126 3/32" brass tube, lead fishing weight, 3D printed vane, 4mm SS bead w/ 1.5 mm hole, 22 gauge wire insulation, super glue and silver solder.
