Better Quiver Protectors for Karakoram Bindings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protect your board's base when stacked for travel with other Quiver Connector and/or Ride Mode mounted boards.
- Ocena
- 0 / 5
- Polubienia
- 2
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Standard Digital File License
Protect your board's base when stacked for travel with other Quiver Connector and/or Ride Mode mounted boards. These quiver protectors are much more durable than the stock Karakoram foam quiver protectors. They are made from a durable flexible rubber and snap into your Quiver Connector or Ride Mode equipped board for a secure connection that won't fall off. They are easy to remove by pulling back slightly on the finger cutout at the rear and then lifting.
Compatibility: Karakoram Quiver Connector and Ride Mode 2.0/3.0
Don't Have a 3D Printer?
We have them available for purchase at krayft.com.
Printing Instructions
Print with TPU. We used 95A. 2 Perimeters and 15% infill is all that is needed.