Framework Destktop side panel with Noctua-style fan grill but slightly better
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom side panel for the Framework Desktop mini-PC, can make it run 5-7 dB(A) quieter combined with the custom fan duct
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 234
- Wydruki
- 6
- Wyświetlenia
- 1288
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original has people complaining that the hooks are really easy to break; I changed a few things to address that:
- I filled in the hooks to be solid. The original was the same as the injection molded version, and the walls were very thin (0.8 mm)
- I added a 0.10 mm gap around the hooks to force the slicer to create a better structure under the hook rather than placing the hooks on top of a top surface
- I filled in all the voids on the side panel so it is thicker overall, reducing the distance the hook sticks out above the surface
⚠ Layer adhesion is important for these hooks; when slicing, check the “slow down by height” option in the speed tab. I set my speed to 25 mm/s from 3.0 mm and up, and it does seem to increase the layer adhesion. I did a test and the hooks were significantly harder to break.
I printed mine with PLA. I did the original with supports and my test samples without, and supports may not actually be necessary