Fractal Node 304 better cooling front cover Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a custom front design to allow a better airflow for the Fractal Node 304 Case while using original parts.
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 367
- Wydruki
- 1
- Wyświetlenia
- 4415
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Hey folks,
inspired by the video on Wolfgang's channel I became aware of @pixelwave's design. At first I really liked it, but after I printed it out and was in the process of preparing the case, it occurred to me that I need to do something of my own....
With that, I defined my goals:
- Use as many original parts of the case as possible.
- Easy to print and assemble.
- Changes should be reversible.
- Airflow must be significantly improved compared to the original front.
Thus, my interpretation of a modified front for the Fractal Node 304 was created. Which is the base of my new TrueNas Scale NAS system.
Additionally needed parts:
- LED Power Button with 16 mm diameter: Link to product page
- M3 threaded insert: Link to product page
- (e.g. M3x6x5 or M3x8x5)
- M3 screw with a maximum length of 20 mm.
Changelog:
- 2023-08-20: Initial release.
- 2023-11-24: Added a new version of the front cover so that the filter can be removed without disasembling the whole system.
Feel free to request any changes :-)
Many greetings,
Bastian