Liczymy pasujące modele…
Featured in “Wolfgang's Channel” channel: This is a custom front design to fit a 200mm Fan with custom 3mm mesh or dust filter for the Fractal Node 304 Case. I am using a 200mm Noctua fan (Noctua NF-A20 PWM chromax.black.swap) that only…
Hey folks, inspired by the video on Wolfgang's channel I became aware of @pixelwave's design. At first I really liked it, but after I printed it out and was in the process of preparing the case, it occurred to me that I need to do…
This model is compatible with the lego system.
Imported from my designs on Thingiverse. Original upload was 27.03.2019 (dd.mm.yyyy) 3Dtommy requested this and helped me test all the iterations. Wait for the model to cool down or else you might screw up the tension. I tried mine when…
This is a drill cheat sheet for the 200mm Fan Front for Fractal Node 304 by pixelwave to not mess it up the drilling part. - print it to A4 letter - cut clean with scalpel and ruler - align to the front chassis - optional fix it with…
This model replaces the IEC internal extension with a plate which can hold the DC connector of a Pico PSU. This is quite handy when building a low power NAS with a Pico PSU.
The model from “mslo321” was modified by me. The original comes from “Man-in-Black” This bracket allows you to mount the Dell Wyse 3040 thin client horizontally or vertically on the wall, on surfaces or directly on the gantry. - you need…
This is a drill cheat sheet for the 200mm Fan Front for Fractal Node 304 by pixelwave to not mess it up the drilling part. - print it to A4 letter - cut clean with scalpel and ruler - align to the front chassis - optional fix it with…
Hello, Sharing my project of mount/holder for terminal Dell Wyse 3040. It's possible to mount it on any wall/ceiling/under desk with 4 screws. Fits perfectly. Doesn't cover any sockets, and power button is available through the hole on…
ORGANIZZATORE GT304 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
As an introduction to Fusion 360 I remixed/remodeled a HDD mounting cage for the Node 304 based of brujoand's design. The main feature of this design are the larger mounting holes in order to facilitate anti-vibration grommets. I've also…
Two different water reservoir covers for older Aerogarden units.
ASUSTOR AS5304T Vibration Dampening Feet These are vibration dampening feet for the ASUSTOR AS5304T NAS, that are printed in two parts using flexible filament. While the AS5304T NAS from ASUSTOR is a relatively quiet NAS when it comes to…
Receiver Mount Futaba R304SBE for RC Car Category: R/C Vehicles
Gridfinity holder for Mitutoyo 3046S dial test indicators.
Replacement part for Frigidaire Dishwasher, Model No. FDB2410HIS2A. The original manufacturer's part number is 5304482490. On the parts diagram it is item 135. The original part supplied by the manufacturer is made a an inferior plastic…
This is a dc motor 360-3045 support (motor diameter: 27.5mm motor lenght: 35mm) that I created from Fusion 360. I know that maybe is not one of the best support, but I'm not very good in 3d drawing... You will need also 2 screws M2.5 (not…
Wall holder for the Novoferm 302/304 remote. Remote sits very secure. Filament: PLA Printer: Ender Creality 3 V3 SE
This model is compatible with the lego system.
10 in rack mount fits 2 Dell Wyse 3040's 2x 6/32 grub screws, ¼ inch for securing the devices in the print 2x Dell Wyse 3040. PoE adapters can be used with attached switch
This is the vent cap for fuel tanks from VP. Filament: PETG Extrudr 30% filling
Will work with Bambu and other large bed printers. Not compatible with Ender3 printers. This is a DIY battery enclosure kit, for the DIY battery building community. I had originally made a kit using 280ah-sized cell for my RV, it worked…
The main handle on this microwave is made of steel, but it mounts via 2 plastic pieces (painted to look like steel). The plastic parts are fairly easy to break, and the handle is only sold as a complete unit, as far as I could find. Print…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
All Files Corrected 15 JAN 25 7:30 CST This is a single spoil board for the 3040 Y extension to the Genmitsu 3020 ProVer. It also includes the Lightburn 10mm x 10mm grid laser etch. I have included the NC G-Code file as well as the…
This model is compatible with the lego system.
The Mikrotik CRS304-4XG-IN does include a small DIN rail mount. It is likely to be also included with other products they make. This DIN rail clamp does use a spring. I made the indent for this spring different on both sides, so it…
The model from “mslo321” was modified by me. The original comes from “Man-in-Black” This bracket allows you to mount the Dell Wyse 3040 thin client horizontally or vertically on the wall, on surfaces or directly on the gantry. - you need…
This model is compatible with the lego system.
This model is compatible with the lego system.
Verbindungsstück zwischen Kran und Zange Category: Other
This model is compatible with the lego system.
Model designed to hold a Logitech Z906 center speaker under a wall-mounted Philips TV, where the original stand would be, if the TV would be standing. Printed with standard settings. Used a PLA filament. For fixing the speaker, use any…
Designed for Siegen SG-3049C02 hair dryer, but possibly compatible with other brands and models of similar dimensions (see photos). Print Settings Printer brand: ELEGOO Printer: ELEGOO NEPTUNE 4 Pro Rafts: No Supports: Yes Resolution:…
I have a Dell 3040 WYSE mini computer running Home Assistant. This is the wall mount I designed for it. Not perfect, but should get the job done. I plan on printing in light blue filament. 1st design was a little to tight. Version-2 is…
I created this stand for the X304 model created by Martin. I used glow in the dark filament for the wormhole. This stand holds the ship perfectly and adds to the display.
From https://www.thingiverse.com/thing:2815310, by erdem03. Backup for when thingiverse offline, OEM no longer available
This is a vented cover piece made to fill the spot where the optical disc drive would be on a dell optiplex 3040 mini tower PC. It has the same pattern, angles, etc. as the rest of the front panel. this part can be 3d printed in as little…
SKADIS mount for the CRS304-4XG-IN, allows you to use the provided din clamp to mount the switch to a skadis board. Uses the Skaids T-Nuts mounting system:…
High-grip wheels used to improve the traction of the robot mower in wet and sloped conditions.. Fit only with Robomow RC304 Print instructions No support needed
Gridfinity holder for six M.2 3042 formfactor cards (most commonly WWAN LTE modems) Should also fit M.2 3030 cards
The lid for my ShopVac broke so I designed a replacement that doesn't hook onto the mechanism for ease of print. You can print it on either orientation without supports.
This was created in Fusion 360 as practice work for me. The model here was scaled up to 200% to better show detail and functionality. Printed with Prusament PLA. Standard Infil You will need to add supports for the overhang at the top.…
A Gridfinity bin for the Klein Tool 32304 14-in-1 HVAC screwdriver. 4x1x3 Gridfinity bin
I'm using it with this: https://www.printables.com/model/413372-rook-shield-mk1 mounted on the back panel
This model is compatible with the lego system.
This year we acquired a new pedestal fan, which is absolutely essential for surviving the hot summer days. My choice fell on the Sencor SFN 3040BK and I must admit that I am completely satisfied with it. It is very quiet and offers many…
This model is compatible with the lego system.
Did not want to buy complete hose set OEM 5230495 for 140 euro so took it into my own hands and made a quick adapter and took a normal 10mm festo pneumatic hose and pressed on. You need to remove all the hose from the one-way valve since…
The Engineering Purpose: In a NAS or Server build (like a TrueNAS setup using the Supermicro X10SDV), the side vents on the Node 304 often work against you. They allow air to be pulled in passively from the sides, bypassing the hard…
Ive created holder for 18 2,5 HDD/SSD for Fractal Node 304 case.
Stand for batman figure for set 76304 - Batman Forever Batmobile
lego 6231 4865 23969 93095 23950 30413 91501 4864 14718 2362
This is a tripod quick-connect plate for the Bogen 3047 Tripod head. I thrifted the tripod without this plate. I have a crappy phone holder with a 1/4-20 mount. This plate allows me to connect it to this otherwise decent tripod/head. This…
I used 30% fill. Print from: PETG Support: No
Stargate BC-304 Daedalus MK2 stand adapter Print at 10% infill with a layer height of 0.1mm with a base layer of 0.2mm Filaments Used: Sunlu PLA+ Black Elegoo PLA+ Space Grey Elegoo PLA+ Orange I wanted to have the stand adapter at a…
Taking the available files from Calamity's Digital Constraction Collection I was able to mod the mask from Toa Mata Nui's build into a Printable form for use on builds Still have work to do in order to look 1:1. Print Settings Printer…
This model is compatible with the lego system.
Hello, Sharing my project of mount/holder for terminal Dell Wyse 3040. It's possible to mount it on any wall/ceiling/under desk with 4 screws. Fits perfectly. Doesn't cover any sockets, and power button is available through the hole on…
Disclaimer: This design is an independent creation and is not affiliated with, authorized by, or endorsed by the LEGO Group. It is designed to be compatible with standard building blocks. This brickvariation corresponds to theLego 1x4x1…
Disclaimer: This design is an independent creation and is not affiliated with, authorized by, or endorsed by the LEGO Group. It is designed to be compatible with standard building blocks. This brickvariation corresponds to the Lego Panel…
Dust collection foot for a 3040 CNC Machine. PLA printed Foot with output for a SCH40 PVC Pipe. Uses two TPU 'combs' slightly offset w/ a PLA printed retaining ring. ¼-20 or 6mm hardware compatible.
You need 4 pcs M3x4x4 heat-set inserts and 4 pcs M3x6mm countersunk screws. PS: added version for 103048 battery and Baofeng UV-5R clip/
Custom wheels and tires for the 10304 Lego Camaro Z28 to replace the stock ones with a period correct setup. You have a choice of either unmarked or lettered tires with the "Goodyear Eagle" insignia. It's a staggered tire setup with a…
Printed out of ASA with shrinkage compensated, 0.2mm layer height. Clicks in it's place over the busbar. Compatible with with: Eve LiFePo4 LF304 Terminal Cover Eve LiFePo4 LF304 Wirebox
A gridfinity bin for the Knipex 975304 Ferrule Crimping Tool + some design files.
This model is compatible with the lego system.
This is a bracket to mount a Bench DMM under a shelf. Its compatible with: Owon XMD3041 / XDM3051, Farnell Multicomp Pro 730027 / 730028, Peaktech P4095 / P4096. The closed variant is more rigid (the open version tends to open a bit under…
Adapter from standard microphone holder to microphone Sennheiser MZH3040+ME36
Redukce pro podstavec zmenšený na 85 procent https://www.thingiverse.com/thing:4874350
Requirements : A Drill Press (this mod will be impossible with a hand drill). SCV10VUU Linear Bearings 8x M5 x50mm Stainless steel bolts 8x M6 x20mm Countersunk Flat head Stainless steel bolts 8x M6 x20 Socket Cap Head Stainless steel…
surface-mounted box für the Burgwächter Burgcam bullet 304. You can store the cables in it and rotate the camera. Ideal if you want to mount it on the side. The ball-joint of the camera is very limited. With this mount, you can fit it…
Refuerzo para el dispensador de agua de brita. Con este refuerzo se evita que el plastico se raje por la zona del grifo. puede complementarse con el modelo para colgar el dispensador de 8 litros. https://www.thingiverse.com/thing:5445332…
Pata para poner en cajon de ikea madera, vale tambien para cualquier otro recipiente que tenga esquina. Print Settings Printer: Two trees Sapphire Plus Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.3 Infill: 30 Filament:…
This is the new and very much improved version of the BC-304 class from the show Stargate. Originally I intended to release it as a remix of the original one, but the changes are quite large so I decided to post it as an entirely new…
A mount to attach your Dell Wyse 3040 to your Ender 3 style printer for running klipper
We use Sheffield air measurement machines to inspect hole sizes. The air lines are always open and make a hissing sound. This block will hold the 2 gages I most commonly use ( .1265 & .1304") and it muffles the sound so I don't hear it…
3041_BRITA container tap reinforcement Reinforcement for the brita 8 liter container faucet It prevents the container or even the tap from breaking as it rests on the piece and cannot bend.
Para poner el iman que venden para evitar oxidos en el lavavajillas.
Sirven para subir unos mm los cristales de las neveras de BAlay y que quepan mejor las botellas de 1.5 litros.
If your G305/G304 scroll wheel is rubbing against the shells, the rubber part of the scroll wheel is degraded, you can open up your mouse cut the rubber out and replace it with TPU printed ‘skin’ for your mouse wheel. you can print this…
I was looking for a possibility to operate my 3D printer power-saving via Octoprint, so that I can also create timelapses and so on. So the device also needs some power to not be overloaded by the image processing. Besides, current…
Repair part for BOSCH KIM30471 hinge Print settings: -layer height: 0.28 Compatible with: Balay: 3FI140B, 3FI152B, 3FI153B, 3FI354B, 3FI355B, 3FI556B, 3FI5671B, 3FIB3710, 3FIB3711, 3FIB3720, 3GI150B, 3GI151B, 3GIB3110, 3GIB3111, 3GIB3120,…
Print at high resolution on textured bed, with support
We had about 50 Axis M3045-V dome cameras to install at work, and rather than pay the ridiculous price of ~$100/ea for this type of mount made by Axis, I designed this one instead. This mount was specifically made to fit the M3045-V, but…
I printed mine out of ABS with 4 perimeters and 4 solid top/bottom layers on its side. The following are needed to fit. 4 Printed Parts 8 M3 nuts 16 M3 X 6mm socket button head screw
A replacement foot pedal for the Hoover Windtunnel vacuum. You'll need the metal plate from the original one. Foot pedal assembly Hoover WindTunnel UH70120 Hoover T2 304233001 You'll likely want to print this upside down. Tested on Oct…
This mount will let you to screw your dell wyse 3040 into wall or another objects. To mount this thing you need: 2 pcs wood screws One more modification that I added into my version of this mount is hole for power button and two hole to…
A Mount for the Wyse 3040 for Ender 3 to mount under the printer
