1 / 1
Genmitsu 3020 Y Extension Upgrade to 3040 Spoil board with laser etch grid — zdjęcie 1

Genmitsu 3020 Y Extension Upgrade to 3040 Spoil board with laser etch grid

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Single spoil board for the 3040 Y Extension to the Genmitsu 3020 Pro. It also includes the Lightburn 10mm x 10mm grid.

Ocena
0 / 5
Polubienia
4
Pobrania
77
Wydruki
1
Wyświetlenia
341
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

All Files Corrected 15 JAN 25 7:30 CST

This is a single spoil board for the 3040 Y extension to the Genmitsu 3020 ProVer.  It also includes the Lightburn 10mm x 10mm grid laser etch.  I have included the NC G-Code file as well as the Carbide Create file along with the modified Fusion files to create your or modify your own tool paths.

The lightburn files are 3040_Spoilboard_Grid_10mm.txt.  You will need to change the extension back to .lbrn2 in order to use them.

The .NC G-Code file is named Corrected_3040_Spoilboard.nc.txt.  You will need to rename it to .NC in order to use it in UGS or similar.

The Carbide Create file is named 3040_Spoilboard.c2d.txt You will need to rename it to .CD2 in order to use it in Carbide Create.

This is still in the test phase.  Will post photos and makes once I have finished the development of the modified files.

Tagi