Liczymy pasujące modele…
Add-on for the CNC 4040-PRO to hold the Probe, the tools for the collet and the 2 allen keys. The model needs a magnet (10mm or less): The magnet will hold the holder on the junction box on the Z axis and at the same time will secure the…
Included in this mini-collection: work holding and cable management. For the work holding, the flat Genmitsu workplate has a set of M6 holes set at an unusual spacing pattern, 54mm X and 42.5mm Y. All clamps accept an M6 machine bolt with…
This is a complete CAD model of the Genmitsu 4040-PRO MAX CNC router, created for reference, planning, and customization. The model includes accurate dimensions and key components such as: Aluminum extrusion frame X, Y, and Z-axis…
Cad model of the Genmitsu 3030ProVer max. This is a work in progress and some things aren't 100% accurate but the measurements for the frame are within +/- 2mm other components are somewhere in the +/- 5mm This is mainly being modelled to…
This is a simple, clip-on Z Probe holder for the Genmitsu 4040 Pro CNC Router. Has a post to wind the wire and a nub to hold the alligator clip, while securing the wire. Should import in the correct orientation, on its side. There is…
simple cover for the y axis limit switches so metal shavings don't cause false triggers for the genmitsu 3030 prover stand cnc on its back and remove the two screws that hold the rear limit switch in place , slide this guard over the…
I made this dust shoe after upgrading my Genmitsu CNC 3020 to use a Makita RT0701 trim router. I never really liked how the Genmitsu dust shoe bristles would get crushed and pusshed into the endmill during deep cuts so I decided to make…
Thanks again for @JimmySpeegle_752748 providing the base model. I used a copy of the hole pattern to redraw the Spoilboard and made several variants: M5 Flat Head Counterbore (2.8 mm Depth, 11.2mm Dia.) for the outer Edges M5 Flat Head…
I got the cheap limit switches off Amazon ( https://www.amazon.com/Genmitsu-Micro-Switches-3018-PROVer-3018-MX3/dp/B08P1D6WTR ) I was disappointed to discover that there was not a coherent setup for mounting them available at large. So I…
Similar to all other 3018 drag chains. Unique features: -The prints come out clean without any supports. -Impossible to break - falls apart instead break, tested with PETG -Build in 5.5mm DC connector for spindle - like this -Side m3x14…
Designed in OpenSCAD for the laser linked below: https://www.sainsmart.com/collections/laser-cutting/products/genmitsu-cnc-blue-violet-light-fixed-focus-laser-module-kit-for-3018-prover-3018-mx3 Air hose connector designed for the…
Z Height Probe holder for Genmitsu 4040-PRO MAX Can be mounted with double sided carpet tape
I designed this part so I could use the Makita RT0701c as the spindle for my Genmitsu CNC 3020. I wanted to use the original Z axis components cuz I'm cheap and this is a printed part and less than super-rigid anyway. Parts needed: Stock…
super rigid upgrade that holds the 2020 alu profiles together to minimize flex, i printed them in PETG and they are definitely rigid The Machine isn't flimsy, but well, every little bit helps to be able to push the machine You might need…
I frequently upgrade 3D printers so why not improve a small CNC router? Through these upgrades you will: Switch to a higher power and RPM Dremel 3000. It improves the performance of the router and still still be removed to use by hand.…
I've been using the inexpensive but rather nice Genmitsu magnetic dust shoe on my DIY CNC router with a 500w 52mm spindle. I recently overhauled and built a new improved (is it new or improved, can't really be both) and due to the…
I am using spindelholder of 69mm for Makita-Router (using adapter to 65mm). Lasermodul of Genmitsu is using small spindelholder that comes with 4040. To avoid need of changing spindelholder for laser I made this adapter -> laser fits in…
Anschlag für das Fräsbrett einer 3018 Pro. Die große Version hat Markierungen alle 5mm. Gedruckt zweifarbig mit PLA.
The cnc clamps here were designed in order to get the biggest possible working area for three different PCB dimensions: 70x50, 100x70 and 120x80 (mm). For good results: clamps should be mounted as symmetric as possible (with respect to…
I Designed this Genmitsu 4040 Reno CNC Probe Mount to fix the issue of the probe being dragged around by the Y axis to avoid it being snagged. The part is designed for a 10x4mm magnet but I have included the .stp file so you can modify it…
Parts 2x printed mount 4x M5*12mm socket head screw 4x M5*10*6 hammer nut 1x M4*8mm button head screw Instruction Mount two brackets 115mm spaced onto the extrusion using M5 screw and nut Slide the power supply into the brackets and align…
Z-Probe holder to clip on a Genmitsu PROVerXL 4030 v2. Printed as one piece using supports. You can mount it to your machine using existing holes and hardware (see attached photos).
Protective Enclosure for the Sainsmart Genmitsu 3030 Prover Max – Modular, Functional, and 3D-Printable! This high-quality protective enclosure is specifically designed for the Genmitsu 3030 Prover Max CNC machine, offering optimal…
FR Vous usinez avec votre fraiseuse CNC ? La gestion de la poussière est importante, mais si vous avez une dust shoe à hauteur variable programmable tout est plus facile ! Vous trouverez ici les plans pour vous en faire une adaptée à la…
The 3018 is a popular format of small desktop CNCs that are sold by diffeent brands, wich one of the better know being Genmitsu. This one comes with an X/Z-axis assembly made from stiff plastic and the nice feature of integrated limit…
I wasn't particularly happy with the factory anti-backlash nut for the Sainsmart Genmitsu 3018 PROVer, so I designed 3 additional mounting blocks for 3 different styles of nuts. All have minimal tolerance built in for your printer, but…
All Files Corrected 15 JAN 25 7:30 CST This is a single spoil board for the 3040 Y extension to the Genmitsu 3020 ProVer. It also includes the Lightburn 10mm x 10mm grid laser etch. I have included the NC G-Code file as well as the…
Genmitsu 3018 Pro Y Limit Switches Note: This is just one of many easy enhancements I have posted for the Genmitsu 3018 Pro CNC Router. None of my enhancements require any modifications to the stock hardware. Just bolt them on and go. If…
The parts hold the PSU on the back of a SainSmart Genmitsu 3020 PRO MAX. Printed with brim to avoid warping. 11.08.2022: Update - Holder with cable guide Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter…
Overview I recently started experimenting with DIY PCB milling on my Genmitsu Cubiko CNC and quickly realised that most PCB holders online were designed for 3018-style CNC machines using aluminum extrusion beds and T-nuts. The Cubiko…
Genmitsu 3018 Pro X Limit Switches Note: This is just one of many easy enhancements I have posted for the Genmitsu 3018 Pro CNC Router. None of my enhancements require any modifications to the stock hardware. Just bolt them on and go. If…
Check the model here: https://a360.co/4noqwko This dust baffle is for the 4040 Pro Max CNC router machine. I printed them in the CR30 so I can print them in a whole piece, but I added a version of the piece divided into two parts, so you…
Limit Switch mounts for a Genmitsu 3018 CNC router but the mounts should work on other clones.
Use PETG at minimum 80%
FR Support pour le boitier offline de la Genmitsu PROVerXL 4030. Lorsque celle-ci est surélevée, il est possible de mettre le boitier offline à coté du boitier de commande de la CNC. La fixation du support se fait directement sur la face…
This laser mount is made to use laser without removing the spindle/router.
Genmitsu 3018 Pro E-Stop Mount Note: This is just one of many easy enhancements I have posted for the Genmitsu 3018 Pro CNC Router. None of my enhancements require any modifications to the stock hardware. Just bolt them on and go. If you…
This is a mounting bracket for the Doesbot CNC board with a fan mount to cool off some upgraded stepper motors for my Genmitsu 3018 PRO. I upgraded several components and the stock stepper motors (and crappy A4988 drivers) did not cut it…
Genmitsu 3018 Pro Cushion Feet Note: This is just one of many easy enhancements I have posted for the Genmitsu 3018 Pro CNC Router. None of my enhancements require any modifications to the stock hardware. Just bolt them on and go. If you…
A Y carriage action replacement for a Sainsmart Genmitsu Prover that lets you use a standard lead screw connector like the following one from amazon.…
This is a pen holder that mounts to the side of the ProVerXL 4030 spindle. It allows for great pen art and another use for these machines. The holder fits 'sharpie' markers (or any pen with a 12mm shaft. It can hold the pen straight or at…
These braces are mounted with T-nuts onto the 2020 extrusion into the corners of the enclosure, and then you can place your CNC router's feets into the holes of the braces. Your CNC router will be centered, and you can even (carefully)…
This is an update to the original model. The first model had issues with flexing and bending. It also didn't clear the top and bottom flange of the Z-Axis. This model has added support to prevent flexing and has been trimmed to avoid…
Genmitsu 3018 Pro Vacuum Attachment Note: This is just one of many easy enhancements I have posted for the Genmitsu 3018 Pro CNC Router. None of my enhancements require any modifications to the stock hardware. Just bolt them on and go. If…
Reinforced the z-axis with an MGN9 linear rail and 2 carriages. Be careful when drilling out the nut block. Do not go deeper than 5mm. Use the printed part with a 3-3,5mm drill to locate the center and punch it with a hammer. Check if…
There are 4 feet for each corner of the machine. The back left has a cutout for the energy chain to leave it untouched. The feet have a feature to capture the existing aluminum bent sheet metal and hold them nicely. Recommend many top…
Z-Probe Holder for the Genmitsu 3020 Ultra CNC router
I recently got the SainSmart Genmitsu Jinsoku LC-40 10W FAC laser and couldn't find any air assist nozzles that fit it perfectly. Some of the xTool 10W air assist nozzles would fit around the lens, but not with the other tolerances that…
FR Voici la collection de printemps 2022 Freddy Made. Une superbe collection d'accessoires à installer sur votre Genmitsu créée par Fred M, un abonné de la chaine passionné d'optimisation en mécanique, et ça se voit ! 1 - Nouveaux support…
NEMA17 motors have wave spring causing axial play. 3020, 3018 CNC contruction connects Z leadscrew directly to motor shaft. This results Z-axis less capable than it could be. Aditional nut restrain leadscrew and releaves stepper bearing…
Spindle holder insert for Genmitsu 3020 PRO v2 CNC machine. Designed it to hold laser that was smaller than spindle diameter. This adaptor is compatible for 43mm and smaller. Wall size is 3.5mm.
Genmitsu 3018 Pro Z Limit Switches Note: This is just one of many easy enhancements I have posted for the Genmitsu 3018 Pro CNC Router. None of my enhancements require any modifications to the stock hardware. Just bolt them on and go. If…
Stop dust and chips from falling through the holes onto the linear rails and ball screw. After adding rubber covers this was the last step to stop debris from making its way under the machine bed. These pegs have an M6 X 1.0 thread. I…
3d printed bracket that mounts on the side of the spindle using one of the original screws holes. Fits a laser module which is 30mm wide. Mine is the Neje 20w diode laser. Laser connects with 2 M3 8mm screws. Bracket uses a M5 12mm screw…
FR Supports de tuyau d'aspirateur installable sur une CNC Genmitsu PROVerXL 4030. Il comprend une potence pour le support de la broche d'origine et une rotule permettant le dégagement sécurisé du tuyau de l'aspirateur. 03/2025 Ajout du…
This is a custom-designed laser mount for Genmitsu CNC machines, built specifically for compatibility with LaserTree laser modules and their mounting systems. The mount provides a secure, easy-to-install solution for adding LaserTree…
FR Mise en place d'une broche de 1.5Kw avec boitier VFD déporté. Le kit utilisé vient de Vevor, il comprend un moteur de broche 1.5Kw et un variateur de fréquence série A2 de 1.5Kw également. La Genmitsu PROVerXL de Sainsmart est livrée…
Very Simple adaptor mount ring to make the Katsu Mill fit nicely into the DeWalt Mount that's shipped with the 4030. It's a snug, but not complicated fit on both sides - just insert the machine as shown on the picture and fix using the…
This is a holder for the XPhotonics X1 Pro Laser Cutter that fits in the standard 65mm or 69mm round router holders for the Genmitsu 4040, 4060 or 6060 routers. It should fit any other router that has the same diameter holder as well. It…
I remixed the original (Woodpecker?) enclosure to accommodate the CAMTool CNC v3.3 controller included with my Sainsmart Genmitsu 3018 PRO. I moved a few holes around without changing the overall dimensions. Use the cover included with…
Modded the XY carriages to get them stiffer. Used M3 brass inserts suggested for Voron printers. M3 Threaded Insert (M3x5mmx4mm) https://vorondesign.com/sourcing_guide?model=V2.4 You have to tap the M3 for the old screws and M5 and insert…
This parametric model was designed to allow insertion of an inline duct fan for fume extraction from a laser cutter. The duct attachment shoulder diameter can be adjusted so that a different sized duct or fan can be attached. The laser…
FR Fichiers pour la construction d'un outil permettant de fraiser des tenons sur une CNC, mais pas que, vous pouvez également usiner des champs de pièces de bois facilement. ENG Files for building a tool to mill tenons on a CNC, but not…
I designed a shop vacuum adapter for a Genmitsu 65/60 Dust Shoe. It will be used with a Genmitsu 4040 Pro Max and, for now, a DeWalt shop vacuum. The only recommended print setting is “Seam position: Random”: Currently there are two STL…
Genmitsu's offering for this machine is too restrictive, especially when mounted high to accommodate short tool bits. This maintains full air flow at the cost of transparency. It works very well carving wood and restricts the radius of…
I remodeled the case from Michael's youtube video ( https://www.youtube.com/watch?v=Q4TrzshXV10&t=314s ) on upgrades regarding the CNC3018 router. I used the smaller high/ low relais from amazon (…
Replacement lens cap cover for the Genmitsu/Sainsmart Z5-1 1064nm laser
I wanted something a little simpler to switch out that would also give me a little more z height for my G8 lens. I have the extended Y axis, so the loss of print area wasn't a big deal. Print upside down with tree supports enabled. The…
My attempt at modifying the 3018 upgrade case by Teaching Tech. Hopefully will be printing it soon.
genmitsu 3020 stuff
A very simple bracket to hold a Nymolabs or Genmitsu Wireless TLS Probe in place on your CNC machines spoilboard surface. Just two small screws to hold it down and you're done. I upped the Fusion file in case you want to change the screw…
Holds all the accessories that comes with the kit. Had to split the bin in 2 to fit my printer. Printed on Kobra 3. 2 colors 3 wall loops and 15% Half 1 is 130.777mm x 167.5mm x 21mm Used 118.85g of filament. 5h 17m print time Half 2 is…
Print using whatever, slips over the build plate, screw in your clamps as per usual. EDIT: Added a circuit board clamp for 6x4 sized boards in the same style, there are a few notches on either end to be able to attach something to do…
FR Vous usinez avec votre fraiseuse CNC ? La gestion de la poussière est importante, mais si vous avez une dust shoe à hauteur variable programmable tout est plus facile ! Vous trouverez ici les plans pour vous en faire une adaptée à la…
FR Vous trouverez les fichiers des fixations pour le Genmitsu PROVerXL 4030 V1 dans ce dossier, les fichiers de la dust shoe sont également inclus. ENG You will find the mounting files for the Genmitsu PROVerXL 4030 V1 in this folder. The…
Set of 3D print to replace the clamp for CNC 4040 from Genmitsu using their screw and nuts. The design is inspired by the clamps used if milling machine : a stair case and a finger are attached to the bed in a way that the pressure on the…
This is a clip that holds on to the front extrusion of the PROverXL 4030. You can super glue magnets on it to hold the tools or other models like Gridfinity bases/holders. The clip is sized at 14mm between the prongs which gives a sliding…
Genmitsu 3018 Pro Cable Chain Instructions Note: This is just one of many easy enhancements I have posted for the Genmitsu 3018 Pro CNC Router. None of my enhancements require any modifications to the stock hardware. Just bolt them on and…
Genmitsu 3018 Pro Clamping Kit Instructions Note: This is just one of many easy enhancements I have posted for the Genmitsu 3018 Pro CNC Router. None of my enhancements require any modifications to the stock hardware. Just bolt them on…
Genmitsu 3018 Pro Cable Clips Instructions Note: This is just one of many easy enhancements I have posted for the Genmitsu 3018 Pro CNC Router. None of my enhancements require any modifications to the stock hardware. Just bolt them on and…
A 3D printable / CNC-able Spoilboard for the Genmitsu 3030 PROVer MAX. Two parts so you can make it on the CNC itself. 15mm thick, needs 4x ~20mm M6 SHCS to bolt onto the aluminum base plate. I recommend placing some sacrificial material…
This is a bracket to hold the Genmitsu WiFi USB module to the frame of a 3018 Prover V2 CNC. Could be attached to any 2020 extruded frame. Use 2 m3x10 screws and 2 m3 2020 T-Nuts. The Genmitsu WiFi module snaps into this brackets frame.…
Build myself a Genmitsu 3020 ultra. Wanted to make the LCD and probe holder attachment compact and self contained within unit Instead of dangling wires all around. LCD holder is attached with zip ties to cnc for convenience and lcd plate…
I made this model myself after I bought the model from The Clack Shack off of etsy. I made this one because the model from The Clack Shake does not fit the shipped model of the cubiko plus I wanted to share a free model for the community.…
I wanted a way to secure my wifi module to my CNC while keeping things relatively free of dust and without having to modify the machine in any way. This does the job quite nicely. This is my second revision with optimizations to use less…
Print using whatever, slips over the build plate, screw in your clamps as per usual. EDIT: Added a circuit board clamp for 6x4 sized boards in the same style, there are a few notches on either end to be able to attach something to do…
A set of brackets to mount the massive control box for the Genmitsu CNC Router Machine PROVerXL 4030 Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0.3mm Infill: 20 Filament: PolyMaker PLA…
FR Vous usinez avec votre fraiseuse CNC ? La gestion de la poussière est importante, mais si vous avez une dust shoe à hauteur variable programmable tout est plus facile ! Vous trouverez ici les plans pour vous en faire une adaptée à la…
FR Vous trouverez les fichiers des fixations pour le Genmitsu PROVerXL 4030 V1 dans ce dossier, les fichiers de la dust shoe sont également inclus. ENG You will find the mounting files for the Genmitsu PROVerXL 4030 V1 in this folder. The…
Specifically, it's this clamp. There's not room for the t-slot nut, and I don't use those (my CNC has M6 threaded holes). My Gridfinity bins are all pressure fit designs, and have an extra wedge for you to use a screwdriver to reclaim…
if you have bought the extansion kit you can use these 3d files to keep the old one together completely. I extended the x-axis support so that you can put thicker beams of wood underneath. myself had the x-axis supports milled in aluminum…
Wanted a easy swap out mount for my diode laser that would give me repeatable focus height so I made one. Fusion 360 file included for your editing pleasure. The three mounting holes on the bottom are a 20mm spread. Guessing it will fit a…
This model is for the Genmitsu CLF55 laser. The laser body nicely nestles nearby its friends. The puck holder is for the provided 16x30mm cylinder. This model is designed for the large PROVer 4030 mounting plate and just barely squeaks…
I needed a holder for the little wrenches that came with my Genmitsu 3018 PROVer. @XL3_219646 has a nice little cube that goes on the side of the panel which I redesigned to go into @RostaP's honeycomb storage wall. PETG @ 0.22m height…
Genmitsu PROVerXL 4030 Vacuum Adapter for stock 300watt motor. This adapter will allow you to connect a 1.25" vacuum hose to the CNC and allow it to suck up all the dust created when milling. This was created in two parts the top part…
A clip that you slide over the existing clip, this model has 2 x 6mm 5 x 6mm 2x 4mm tube holders
This is a very simple tapered tube with a strong plate to attach to a Genmitsu 4030XL (possibly other models as well) CNC mill. The tube will allow a typical Shop Vac style vacuum hose to be inserted (potentially quite a bit, depending on…
y axis rail covers to protect rollers and ballscrew on the genmitsu 4030 v2 , should work fine on v1 as well , three piece design so should fit most 3d printers easily
If you want to keep the stock probe cable intact, you'll need 2 JST plugs and 3.5 male/female stereo jacks. Print 2 of the males and glue together.
Cables dangling around maybe aren't safe but at least are ugly :) Trays: Hide all wiring. Allow to pass wiring through or from the side. Print vertical with 2 perimeters and no infill. Add 10mm brim. Glue with VHB tape Board cover…
