Genmitsu Cubiko Spoil Board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created this myself based off the drawings that Sainsmart provided for the Cubiko.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 373
- Wydruki
- 1
- Wyświetlenia
- 1183
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v3.0
I made this model myself after I bought the model from The Clack Shack off of etsy. I made this one because the model from The Clack Shake does not fit the shipped model of the cubiko plus I wanted to share a free model for the community. My model lines up over very well to the bed of the Cubiko. I made a cutout to expose the bed level and also a spot on the bed for the Cubiko to calibrate the z offset so that way the spoil board doesnt have to be removed to probe. the board is 4mm thick. Let me know if you have any problems and ill fix them!
Enjoy!