Shop Vac Adapter for Genmitsu CNC Mill
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very simple tapered tube with mount to match spindle left side plate.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 403
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a very simple tapered tube with a strong plate to attach to a Genmitsu 4030XL (possibly other models as well) CNC mill. The tube will allow a typical Shop Vac style vacuum hose to be inserted (potentially quite a bit, depending on the size of your tubes/adapters) without any tape, gasket, or sealant.
I may play around with different interchangeable nozzles for the bottom as needed. As it is, it is adequate to pull up most shavings.
I had to make this 5mm shorter than the bracket because my printer won't print that tall…
FreeCAD source included.