1 / 4
Fan and Duct Adapter for Genmitsu 3018 CNC Router (CadQuery Customizable) — zdjęcie 1
1 / 4

Fan and Duct Adapter for Genmitsu 3018 CNC Router (CadQuery Customizable)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Attaches to the aluminum extrusion on a Genmitsu 3018 so that a duct fan can draw smoke and fumes away from a laser head

Ocena
0 / 5
Polubienia
3
Pobrania
23
Wydruki
0
Wyświetlenia
230
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
BSD License

This parametric model was designed to allow insertion of an inline duct fan for fume extraction from a laser cutter. The duct attachment shoulder diameter can be adjusted so that a different sized duct or fan can be attached. The laser cutter is a Genmitsu 3018 with a laser head, and the inline duct fan used is the one listed here. This adapter is mounted to the 20x40 extrusion on the side of the router, but with stand-offs it may be possible to mount it on top of the X-axis gantry.

There is a tiny bit of deflection in this adapter with the fan installed, so you may want to increase the plate thickness by a millimeter or two in order to avoid this.

Results may vary depending on the air flow of the fan and duct selected, but this arrangement pulls smoke out through the duct fairly well. This adapter is being paired with a window expander and the 3D printed duct adapter here. This should work even better with some sort of enclosure around the router. No claims are being made about the safety of this arrangement as it may not evacuate fumes properly. Use at your own risk.

The model script was designed using CadQuery, which is a Python module for creating CAD models. The original source code file is included and has a few parameters that are of interest. All parameters are in millimeters, and have comments that explain their intended uses.

The part in the pictures was printed on a Prusa i3 Mk2 with a 0.4mm nozzle.

Print Settings

  • Layer Height: 0.2
  • Brim: Yes
  • Supports: No
  • Material: PETG (PLA or others should work too)

Customization

This model can be customized by opening the script in CQ-editor, the widely-used IDE for CadQuery. Change the parameters in the script, which have comments explaining what they do, and execute the script. You can un-comment the export line towards the bottom of the script to export your customized model to STL.

Tagi