1 / 9
Home Assistant wall mount for Dell 3040 WYSE computer. (Version-2) — zdjęcie 1
1 / 9

Home Assistant wall mount for Dell 3040 WYSE computer. (Version-2)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

12,01 € – 14,68 € netto (bez VAT)

Dla pliku: Dell-3040_Wall-Mount_HA_Blue_v2_0.4n_0.2mm_PLA_MINIIS_11h54m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 13,35 € netto (środek widełek).

Masa podana przez autora
197 g
Czas druku podany przez autora
11,91 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Home Assistant Dell 3040 WYSE computer wall mount. Original design was a little to tight. Version-2 is good now.

Ocena
0 / 5
Polubienia
10
Pobrania
30
Wydruki
1
Wyświetlenia
305
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I have a Dell 3040 WYSE mini computer running Home Assistant. This is the wall mount I designed for it. Not perfect, but should get the job done. I plan on printing in light blue filament. 1st design was a little to tight. Version-2 is good now. Added embossed letters into part and also a power button hole to see the little light and hit the power button if needed.

Original design and version-2 were both designed in Plasticity. I think I really like it.

I also included a picture of the original design. Front wall was a little tight.  Area too tight is circled in red. 

Version-2 is perfect. I need to weed out the supports in the embossed letters. Hole for the power button is perfect.

 

 

Tagi