Liczymy pasujące modele…
You can easily find dirt cheap Via C7 terminals from Wyse. They can work as a retro machine or perform other functions. More often than not you can buy them without power supply and any stand or feets. I designed mine to be easy to print,…
Description I acquired a lot of Dell Wyse 5060 for my homelab and @EvilProphet 's excellent ESRack system fit the ticket for racking them. I whipped this bracket for my 5060s / N07Ds. The ESRack system includes the following components:…
Small part printed solid for strength. Use PETG or ABS, pla is not recommended
The model from “mslo321” was modified by me. The original comes from “Man-in-Black” This bracket allows you to mount the Dell Wyse 3040 thin client horizontally or vertically on the wall, on surfaces or directly on the gantry. - you need…
Halter für den Dell Wyse 5070 thinclient zum Unterschrauben. Klemmelemente halten den thinclient in Position, sodass er sich in keiner Richtung bewegen kann. Es gibt zwei Versionen, ich habe die geschlossene Variante gedruckt, wer…
The original minimal stand with posts properly attached to the body and additional chamfer for added strength. Used print settings: Filament: Jayo PLA+ Blue Layer height: 0.28 (0.4 nozzle) Wall loops: 3 Infill: 15% Enable support: Yes…
you have to add tree support as described on the picture
Hello, Sharing my project of mount/holder for terminal Dell Wyse 3040. It's possible to mount it on any wall/ceiling/under desk with 4 screws. Fits perfectly. Doesn't cover any sockets, and power button is available through the hole on…
I designed this stand because most existing solutions were either too bulky or omplicated. This design focuses on simplicity, stability, and clean looks. The stand consists of two separate legs that securely hold the device in a vertical…
I recommend printing it with PETG or ABS, as regular PLA will permanently deform under sustained pressure. To assemble it, you will need a 6-32 screw with at least 8mm in length.
This is a flatter version of the Dell Wyse 5070 Stand for faster printing and less material usage :) Must be printed with support for the posts. Update 02.02.2026: fixed the gap on the posts reduced the size of the base to match the Wyse…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
IMHO the Wyse 5070 is still an excellent piece of HW considering it can host up to 32GB of RAM and uses very little power. Getting one from ebay is cheaper than a raspberry pi + PSU + case. There are shortcomings, too. The Wyse 5070 only…
Description I acquired a lot of Dell Wyse 5060 for my homelab and @EvilProphet 's excellent ESRack system fit the ticket for racking them. I whipped this bracket for my 5060s / N07Ds. The ESRack system includes the following components:…
Small part printed solid for strength. Use PETG or ABS, pla is not recommended
A small amount of support is needed for the screw hole. YMMV.
I got myself a fairly powerful thin client, the Dell Wyse 5020, to use as a home webserver. It did come with a 'stand' to sit upright, but I wanted to fix this to the wall near my main switch. So I designed this bracket and it's a perfect…
Measure the angle you want in your window with an angle gauge and pick your file or modify it yourself with fusion.(It not a perfect parametric model to use, thus the multiple options) Designed to print on as the picture shows with…
The model from “mslo321” was modified by me. The original comes from “Man-in-Black” This bracket allows you to mount the Dell Wyse 3040 thin client horizontally or vertically on the wall, on surfaces or directly on the gantry. - you need…
M2 brass insert is needed (affinity link), with L = 2mm or 3mm and D = 3.2mm or 3.5mm. There is also a version with an M2 screw directly into plastic without an insert. SCAD source file attached.
I have a Dell 3040 WYSE mini computer running Home Assistant. This is the wall mount I designed for it. Not perfect, but should get the job done. I plan on printing in light blue filament. 1st design was a little to tight. Version-2 is…
Very simple LC connector cable protector for Optiplex / Wyse 7040. This is NOT a cover, instead it covers up the metal parts that allows cables to run through safely. Currently, I have low profile SATA cables running through that gets…
🧾 Bill of Materials : MAIN PARTS Front panel (1x) Hex panel (2x) Column Support Middle (2x) Column Support End (2x) OPTIONAL PARTS additional Extra Column Supports Long Dowel Short Dowel 🖨 Printing Tips and Recommendations : Material:…
Hi, this is a quick kickstand I made for the Dell Wyse 5470 AIO I now use as a klipper host. It is designed to hold the Wyse at about a 75 degree angle, but it might work for other 100x100 VESA All In Ones or monitors. I printed it on my…
EN This bracket allows an external “Western Digital Elements Portable 320GB” USB hard disk to be attached to the VESA mount of a “Dell Wyse 5070” thin client. The corresponding (chaotic) model file for FreeCAD is attached. (Translated…
I made the model in 5 minutes, I think it will be useful to someone. It stands stably and does not fall over.
This model was based on this work. but it has been redesigned to specifically fit the Dell Wyse 5070. I modeled this with a 0.5 mm tolerance. Print Settings that I use: Infill: 13% Layer Height: 0.2 mm Material: PLA (I know it's not…
I'm using it with this: https://www.printables.com/model/413372-rook-shield-mk1 mounted on the back panel
Hier ist der link für das Orico Case, falls der nichtmehr geht ist auch ein Bild dabei, gibts bei Aliexpress oder sonstwo.…
All file could also be found at https://github.com/tsbogend/3dprints/tree/master/wyse-zx0
Adjustable Rack mount for the Dell Wyse5070. This model allows for the Wyse5070 to be mounted flush or sit slightly outward for shallower racks. A small screw and nut can be used to lock the Wyse5070 into place. Model was printed with…
A 2 part modular rack mount for the Dell Wyse 5070 mini PC. This mount is intended to be compatible with the 19-inch modular rack mount system Mauker designed. You can check out their collection to find other 19-inch mount modules. I…
I needed a wall mount for my repurposed Wyse PC that i use as a home assistant server. Maintains access to all the ports at the front and rear including power. No assembly or supports necessary just 4 screws suitable for the wall surface…
Wyse outdoor battery powered cover. Slip fit over the top gives access to mounting on the bottom. Access for charging. Eyelid for added element protection. Microphone hole cutout too. Standard 100% infill print with tree supports works…
Summary Wall mount holder for the DELL WYSE 5070 with optional power supply mounting. The modular design allows the holder to be used with or without the power supply brackets. Print Settings Material: PETG (recommended) Layer height: 0.2…
Halter für den Dell Wyse 5070 thinclient zum Unterschrauben. Klemmelemente halten den thinclient in Position, sodass er sich in keiner Richtung bewegen kann. Es gibt zwei Versionen, ich habe die geschlossene Variante gedruckt, wer…
The original minimal stand with posts properly attached to the body and additional chamfer for added strength. Used print settings: Filament: Jayo PLA+ Blue Layer height: 0.28 (0.4 nozzle) Wall loops: 3 Infill: 15% Enable support: Yes…
I bought an M.2 ethernet adapter for one of my Dell Wyse 5070 machines. It was a slightly different form factor than other M.2 ethernet modules I used in the past. I designed this part to use four M3 6mm flat head screws and two M3 heat…
you have to add tree support as described on the picture
Hello, Sharing my project of mount/holder for terminal Dell Wyse 3040. It's possible to mount it on any wall/ceiling/under desk with 4 screws. Fits perfectly. Doesn't cover any sockets, and power button is available through the hole on…
I designed this stand because most existing solutions were either too bulky or omplicated. This design focuses on simplicity, stability, and clean looks. The stand consists of two separate legs that securely hold the device in a vertical…
Viele nutzen einen “Mini-Server” um z.bsp. Proxmox, Home Assistant, Wireguard oder ähnliches in der häuslichen Umgebung. Der Dell Wyse 5070 ist ein beliebter mini-pc für diese Aufgabe da er auch passiv, ohne Lüfter, betrieben wird. Da die…
I picked up a Wyse think client to use as an alternative to a Raspberry Pi for running OctoPrint. Until I was sure I this device would meet my needs, I used only components I already had: a 4 GB SoDIMM to replace the 2 GB unit within, an…
This is an enclosure for my Wyse-converter PCB that's utilising Soarer's Wyse converter firmware. Hardware 6x M3 4-5mm heat inserts 4x M3x16mm screws 2x M3x4mm screws Assembly Use M3x4-5mm heat inserts and install them into the bottom…
Wanted a way to mount my Dell Wyse computer to the wall with the hard drive, took a Vesa Mount and this hard drive holder and mashed them together. Used PETG to print just in case the heat would melt PLA. I didn't use any supports and it…
Dell Wyse 5060 stand Simple stand for thin client In fact this will fit any 185 x 40 mm rectangular device. Quick print No supports needed
A mount to attach your Dell Wyse 3040 to your Ender 3 style printer for running klipper
I was looking for a possibility to operate my 3D printer power-saving via Octoprint, so that I can also create timelapses and so on. So the device also needs some power to not be overloaded by the image processing. Besides, current…
This mount will let you to screw your dell wyse 3040 into wall or another objects. To mount this thing you need: 2 pcs wood screws One more modification that I added into my version of this mount is hole for power button and two hole to…
A Mount for the Wyse 3040 for Ender 3 to mount under the printer
Recently got a Dell Wyse 5070 to use for OpenWRT router at home. It needed a simple way to be wall mounted, that still allowed dismounting for adjustments or relocation. Issues that require careful consideration: Depth of vesa screw…
This is a quick and light bracket for Dell Wyse 3040 thin client I use this box as main brains of my printer and several others as home servers Other models are usually enclosing Wyse 3040 fully and are a pretty long print Mine is much…
Since I replaced the Rasperry Pis on my printers with the Dell Wyse 3040, I made wall mount clamps for mount it in the same way as the RasPi before. I used M4 socket head cap screws to mount it. STEP file included, feel free to modify! If…
A remix of my Ender 3 Wyse 3040 mount to fit the FYSETC Voron 0.1 kit. May fit other kits as well. You can mount it using two M3 screws with nuts on the inside of the printer if your kit came with mounting holes for the raspberry pi…
This is a simple model to hold a Dell Wyse 3040 mini computer vertically. It retains full access to the power button and all IO. Additionally, none of the cooling is affected. These computers are cheap and great alternatives to Rapberry…
The original design is good I just need to mount it flat to a wall so I remixed it with some holes in the backplate,
Any 19" 1U metal blank needed for it. Just cut the holes, glue the frame, use two M6 screws with hex nuts to fix supports. Please be careful with screwing server - at the bottom of holes there is a pure PCB, not covered by anything, so…
Adjustable camera mount for Wyse camera v3 (V1 will also fit) Fits both MK3 and Mini. Cameramount is mounted to the 30x30 Alu profile. Based on using the Wyse magnetic mounting disk. All prints PETG in my case, PLA ,ABS, ASA etc will also…
changed to a V-slot mount PLA, 15% infill with 3 walls
New Wyse vacuum didn't come with one. So modeled one from our previous Tineco model so it would fit the new one. It also includes a wire hanger so the charge cord is not hanging all over the place.
Dell Wyse 5070 in Extended (fat) version have a little smaller hole for secondary ethernet port, than normal 5070. So there is small bracket for securing Ethernet port from this : Aliexpress M.2 key A+E RTL8125B network card…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
I needed to mount the computer to Robotunits extrusion for work. I remixed the model by CrimsonTech. Worked Great!
Dell Wyse 3040 1U rack19 Mount with blank or 140mm fan mount holder. Or rack10 mount
I recommend printing it with PETG or ABS, as regular PLA will permanently deform under sustained pressure. To assemble it, you will need a 6-32 screw with at least 8mm in length.
Vertical stand for Dell Wyse 5070. It consists of a base and 3 pins. The pins are held by friction and are slightly smaller than the holes. Your pins might need scaling depending on your printer. They should not go in too tight because…
Простое универсальное крепление для тонкого клиента WYSE 3040, его можно закрепить на столешнице под столом, на стене или сбоку от стола.
Hi since i got an 10inch rack i wanted to rackmonut my mini Server in it. Unfortunatly there are only 19inch Rack mounts avalibile online i created my own for my Wyseclient 5070. Printed in ASA on my P1S i recommend ASA it could get hot…
The Dell Wyse 5070 is a thin client with two DDR4 SODIMM slots one M.2 PCIe slot, and one M.2 SATA slot. Typically the PCIe M.2 slot has a wireless card installed, but I wanted a second Ethernet port so I could run opnSense on the machine…
This is a flatter version of the Dell Wyse 5070 Stand for faster printing and less material usage :) Must be printed with support for the posts. Update 02.02.2026: fixed the gap on the posts reduced the size of the base to match the Wyse…
Mount designed for: Dell Wyse 3040. PoE adapters can be used with attached switch Additional components needed: 2x 6/32 grub screws, ¼ inch for securing the devices in the print additional components needed for other half of rack 6/32 x…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Dell wyse Z90D7 (Zx0) mount for 10 inch rack. It uses 4x M6 bolts. Works as it should. Prevents the device from getting out of the rack in any direction. Unfortunately, due to the size of the wyse itself, It occupies 1 ⅓ U.
